retaining clips or spring clips HELP plastic

Similar Questions

• AS3 MOVIE CLIP HELP BUTTON!

  Hello

  I am a beginner and need help.

  I have several movie clip buttons and everytime my mouse over and out they run perfectly, no problem... but now I want these buttons of movieclip to an image when you click on it, and for that, I don't know what to do!

  Here is the code I have so far for the movie clip buttons

  I would appreciate your help, thank you!

  btn_mc.buttonMode = true;
  btn2_mc.buttonMode = true;
  btn3_mc.buttonMode = true;
  btn4_mc.buttonMode = true;
  btn5_mc.buttonMode = true;
  btn_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOver);
  btn_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOut);
  btn2_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOver);
  btn2_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOut);
  btn3_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOver);
  btn3_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOut);
  btn4_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOver);
  btn4_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOut);
  btn5_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOver);
  btn5_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOut);

  function onButtonOver(e:MouseEvent):void
  {
  e.currentTarget.gotoAndPlay ("over");
  }

  function onButtonOut(e:MouseEvent):void
  {
  e.currentTarget.gotoAndPlay ("out");
  }

  The function below will work so that a button is, then you need to create separate functions for each button that is clicked, or use a switch statement in a function to take an action based on which button has been clicked using the event.currentTArget to determine which.

  btn_mc.addEventListener (MouseEvent.CLICK, onButtonClick);

  function onButtonClick(e:MouseEvent):void
  {
  gotoAndStop (2);

  }

• retaining clip broken for CQ58

  What size restraint clip for

  Laptop Compaq CQ58-301SA

  Model: D0X10EA

  Hello

  Go to Page 67-76, including 70 & 21, 22 in this manual.
  http://h10032.www1.HP.com/CTG/manual/c03593268.PDF

  The hinge has HP number 686262-001 of the spare part.

  That's what I got from the online store:
  http://www.Amazon.com/GP/AW/d/B009SOQ3C8?pc_redir=1407388147&robot_redir=1

  http://www.Amazon.co.UK/GP/AW/d/B009SOQ3C8?pc_redir=1405500856&robot_redir=1

  The manual presents the stages of replacement,

  Contact HP or local technical support for replacement.

  Kind regards

• Slow down the change during the stretching of audio or video clips - help!

  I have no idea how it's called, but this is the case whenever I'm dragging an audio or video clip to extend or shorten. When I start to extend or abridge, my video preview Panel divides the screen with the end point and the starting point of the video (whatever it is called). This is driving me crazy! I have a high-end computer and it stops playback during at least 10 seconds, EACH TIME I send an audio clip or video. Someone at - it a credit solutions? It's probably the most frustrating thing I've ever met on this program. It literally stops working.

  Change the setting of Menu - "Composite overview over the plate.

• Targeting nested Movie Clips help

  Having a little trouble with this basic idea, any input would be appreciated.

  Here's my example, frame 1 is a mc, I created named holder. Inside, there is a mc named box. Inside the box are four mcs, circles1-4, inside the circles, I have four skulls.

  

  If I want to affect only the skulls, what is the right way to go?

  For example, what is the right way to write an instruction trace?

  or, if I wanted the skulls fade individually on mouse over, how well would you write this function?

  function over(evt:MouseEvent):void {}

  evt. Target.Alpha =. 5;

  {

  trace();

  }

  }

  Thanks in advance,

  I realize, it's basic stuff, but it comes back to bite me.

  -Sean

  Holder.Box.Circle1.Skull.addEventListener.addEventListener (MouseEvent.MOUSE_DOWN, startDragFunction);

  function startDragFunction(evt:MouseEvent):void {}

  for (var i = 0; i)< 4;="">

  trace ("holder.box.circle" + i + ".skull");

  }

  This would draw a string of your path of the target, where 'I' represents the number of clips you try target. There are different ways you can take this string and apply it to actually target you pliers, do some research on "getChildByName.

  I have not worked with code drag in AS3 yet, so I'm not sure of the syntax. I would suggest you start a new thread and ask on the forum, because it is unrelated to this thread and I guess that not many people will answer your question of drag based on the title of the topic of the thread.

  ~ Chipley

• The position of the clip support keyboard B575 - need help, please

  I lived an intermittent problem with some of the key - sometimes they work and other times I have to press several times so that it can work. I thought it would be a loose keyboard connector so I opened and removed the Ribbon of the connector by gently lifting the retainer clip until he published. I reinstalled the Ribbon connector and tried to get retainer clip back on. He won't and I worked at home all day. The clip has a small protrusion at each end and I tried different directions - no luck. Can you tell me or show me with images the correct procedure for the locking of the water of the keyboard on the main map. It's driving me crazy and the maintenance manual does not show how it should be done. The clip is not in place before inserting the Ribbon? Please help and thank you very much.

  Hi dbw001lc,

  Welcome to the Community Forums of Lenovo!

  There are two types of lock I've seen so far for slick keyboard,

  1.

  

  2.

  

  To unlock fig.1 is pulling up then that is when you insert the cable, and then pull down to lock

  Fig. 2 Unlock is when you lift the top then keyboard then close.

  You can try unlock code and locking Clips when there is no cable yet, which is to check if there is a problem with the retaining clip because it must open and close properly with problems with any cable.

  Hope this helps,

  Cheers!

• Keyboard, keeping for Satellite M30X clip

  Anyone know where I can get a replacement retaining clip for a laptop keyboard? Its a small band of white plastic that fits into the connector of the keyboard ribbon cable to keep in place. It has two legs tiny ends which locate in the connector to secure it but one of my friends broke (due to having to have the socket repaired several times - it's a design on the M30X error).

  Also, I tried I said I want to buy a motherboard full, because the clip is not available separately, but that seems a little stupid - the part cost probably less than a can of coke on his own and I assumed it would be something that is easily damaged or lost if repairs are carried out.

  See you soon,.

  J

  Try ebay

• Satellite L500 - where can I get the clip of restraint for the keyboard?

  Hello!

  A few weeks back, I bought a L500/00U, brilliant.

  Only problem so far, last night one of the clips of restraint on the broken keyboard. It was the SHIFT key that originally broke out, but because I use a lot the SHIFT key, I swapped retiner clips with the key on the keyboard.

  Anyway, my question is, how do I acquire a new retainer clip, I really like to avoid to return the laptop to the store, only just got all my software after a clean install of Windows 7 Ultimate RTM x 64.

  Thanks in advance.

  If the keyboard or else be replaced, why you think you lose something of the HARD drive?
  If technicians share the keyboard it has nothing to do with the OS preloaded with.
  Only the features will be tested and that s it.

  OS should not be installed again.
  Contact the nearest Toshiba authorized service in your country, explain the situation and they will help you in this regard.

• OptiPlex 7040 Micro screws missing and clips for WiFi card

  We have just purchased four Optiplex 7040 Micro computers and open one open to see how they can get to everything in a small box.  By doing this, I noticed that the WiFi card has not been pressed by what it is.  It doesn't look good for me, so I opened the rest.

  One of them had a clear plastic retainer clip, with a screw now with card Wifi supported firmly in place.  The others had a screw, but not clips.

  Since then, I spoke with technical support and support enforcement.  They tell me that they cannot just send screws and Staples, only completely new computers.  Looks like a complete waste for me.

  Does anyone else have this problem?

  

  

  It's normal.

  The newer chipsets have a sink of heat and the Z bar.

  

• Clip broken logo blackBerry Smartphones

  Hello I am new to the forum and I'm in a bit of an annoyance, I broke the clip black plastic which is fixed by 2 screws at the front of the bottom of the phone that the logo clip attaches to when changing the cover and cant seem to find a replacement anywhere. is it possible to replace it? as it is held in slightly by the cover but the falls of the fair, which is very annoying and I don't want to lose the logo also part thanks James

  Have you tried www.cnn.cn or www.truesupplier.com ?

• change the background while retaining the shadow.

  I did a shoot of model with a bright light, the shadow is really strong, but I want to change the color of background to a specific temperature R:238 G:238 B:238, while retaining the shadow can someone help? I have attached an image low resolution I want to apply it to:

  Thank you!

  Hide the model, use curves to adjust the background and shadow to the new values using an adjustment layer curve.

• Computer stops in 3-5 minutes after startup

  Boots, slowly, but eventually the boots completely.  Stop with no warning, no error message.  Windows restore does not, but Control Panel, Explorer open straight.  Both the monitor and CPU at the same time stop.  Starts in routine diagnostic Dell, but runs out of time before that anything can be verified.  All CP/power options are set to never.  Comp was woking OK, without recent changes / installs.  A few days before all this started OK ran Windows Security Essentials. Win XP SP3

  Appreciate any suggestions.

  D

  Thanks to all - those of you who wanted to return to material/heat were ahead of me, but you were right.  Finally got down and dirty, the plastic part that holds the main processor heat sink clips had broken, allowing the heatsink for the CPU.

  A new heat sink retaining clip, a little fat and we are back in the business.   Thanks to all - help each comment.

  THX once again

• Withdrawal of the keyboard on Equium M50

  Hey people

  Hope one of you can help out me. I'm looking to upgrade the memory on the Equium M50 - 164 I and am stuck in the removal of the keyboard. I've updated the memory in the expansion to 1 GB port and all is well. I now want to spend another memory location 1 additional GB. I checked the types of speeds of memory etc... and have the correct memory, however, I can't for the life of figure me out how to remove the keyboard without breaking clips and plastic!

  Any help or get detailed instructions on the removal of the keyboard would be greatly appreciated! Thanks in advance!

  Gas

  Hello

  Have you found that one slot at the bottom of the device memory or why you want to remove the keyboard?

  I m not 100% sure but in my opinion the two slots should be placed at the bottom of the unit and the removal of the keyboard is not necessary.

  Anyway, the Equium M50 is unknown to me but I think that the keyboard was fixed by 2 screws above the keyboard. If you want to remove the screws to remove first the cover plastic thin above the keyboard.
  Then you should be able to set the keyboard but do not forget that you have also disconnected the ribbon cable that connects the keyboard to the motherboard.

• remove the hp pavillion d4990y DVD player

  I release the clip in plastic on the side and the DVD player to withdraw to halfway and stop.  I can not find something else to delete or release.  What is the secrt, please?

  Hello

  The only thing I can think to suggest is when you remove first the lever plastic to release the reader, to keep pulling the lever while sliding as the hunt - if it's any help, there is a guide (including a video preview) on the following link.

  http://support.HP.com/us-en/document/c00619424

  Kind regards

  DP - K

• HP Compaq presario CQ43: not enough ram in my computer

  My HP Compaq presario CQ43 has 2 GB of ram. I want to get 8GB. It is 64 bit and it's hard to run most programs because of the ram being such a small size. It will support 8 GB of ram? If I take out the old 2gig and put 8 gig will perform best?

  According to the manual, yes it can accept up to 8 GB memory DDR3-1333 SO-DIMM. See this video on: 33 in there where is flush with the memory. This technology never removes the memory but you just spread the retaining clips and remove and then follow again. See the second video.

  https://www.YouTube.com/watch?v=hVBzX2OeRtY

  https://www.YouTube.com/watch?v=V5q6fqZVQPs

  You have 2 slots, so you need the modules of 2 x 4 GB like this:

  4 GB (PC3 10600, 1 333 MHz) 621569-001

  http://www.Amazon.com/HP-DDR3-SDRAM-memory-module/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1434888717&SR=8-1&keywords=621569-001

  Yes, 8 GB of memory will be a major improvement. Better upgrade would be to replace the mechanical drive with an SSD. After back if you are interested by this.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.