Revolve 810 Windows 8.1

Similar Questions

• revolve 810 will not in tablet mode

  I have a HP revolve 810 G1 which won't in tablet mode.   Someone at - it ideas why this would be or if it's just a setting that should be adjusted?

  Thanks for your reply, but the problem seems to be updates BIOS F.47 day & 8.1 of Windows that have been installed.  I found some messages from users having the same problem and when I went down the BIOS to version F.44, when everything started to work.  I hope HP fixes this problem with the next update of the BIOS.

• Revolve 810 G2 Executive pen does not work

  Hello

  Revolve 810 G2 / Windows 8.1, all updates (Microsoft and HP) are carried out.

  Pen is not recognized. I can't find any driver associated with feather on the HP page turning G2.

  What I've read, the Pen 'pen tablet HP Executive R1' reference must match a G1 not turn a G2.

  Is this correct?

  Although this pen would work with a G2 810 or pen is dead on arrival, or a driver issue?

  I read a lot about the customers disappointed on the pen of the revolution, when they compare themselves to the generation 2740.

  G2 solved this?

  Thanks for your help,

  Jean-Jacques

  Please see the troubleshooting of pen and calibration

  http://www.HP.com/United-States/HP-Executive-tablet-pen-whitepaper.PDF

  Replace the battery

  For the G2 to test the new PEN

  HP Executive Tablet Pen G2

  "Write messages and notes in your own handwriting directly on your HP EliteBook turn 810 G2 [1] screen.

  http://h30094.www3.HP.com/product.aspx?SKU=10754734&mfg_part=F3G73AA&pagemode=CA

• HP revolve 810 G1, Windows 8.1, screen auto-rotation of images does not work

  I'm sure I can't be alone in having improved my G1 810 turn Windows 8.1.  However it is therefore more useful tablet as the rotation of the screen does not work.  The auto spin button does nothing and after an HP engineer swapped botht huh card system and the button they said that the only option is to return to Windows 8 (original shipping OS).

  Really, this isn't a usable solution when you want the new features of Windows 8.1 update.

  My G1 of 900 ElitePad works well on Windows 8.1.

  Can it really be difficult to get the drivers right and tested?

  Someone at - it a Windows 8.1 working solution?

  Hello

  decommissioning of the Bios to F.44 and auto-rotation should work again (for me it worked).

  I found this working solution myself, HP could not help me anyway.

  Be aware, that the Bios F.44 didn't put heat-settings update as F.47, so you'll have a noisy fan

  HP couldn't tell me when there will be updates of Bios or drivers updated.

  to ensure that automatic rotation is also running Windows 8.1.

  Hope this information helps you...

  Kind regards

  Alex

• Revolve 810 8.1 Windows drivers?

  There are 8.1 drivers available on the HP Support driver download site, why not SDM?  Turn my 810 is a year - old why can't it be updated to 8.1?  Control of the HP Update site Web says that it "has not been tested"?

  Let's go!!!

  Russell

  Please refer to the FAQ 28 in our forum and read #3.
  
  / t5/HP-SoftPaq-Download-Manager/FAQ-28-Why-does-SDM-not-display-any-available-SoftPaqs-for-a/td-p/6367279#. Uvkl9fPnZjF

  It would seem that you have are filtering in your configuraiton of 8.1 Win.

• Revolve 810 G1 unlock in tablet mode. Windows Security button?

  
  

  There is a BIOS update for the revolution by moving to version F.43 update allows to touch the power button while pushing the Windows button (left of the central hinge) to act as the Windows Security button. -It worked for me.

  I also read that by pressing [Ctrl], [Alt] left button right button + [Del] button on-screen keyboard works but I have not tried.

• HP elitebook 810 g2: problem in hp elitebook 810 windows 8.1 32-bit g2 wireless

  Hi all

  I have a problem in my elitebook 810 with windows 8.1 32-bit g2 that the Wireless does not work and tried for more than an hour to install network controller driver but without any positive results and the function key F12 lights up red but the cable for the internet works fine, my problem in wifi.

  Help, please

  You are the very welcome.

  You need this card wireless... driver first driver listed in the upper left corner of the page.

  https://Downloadcenter.Intel.com/download/25511/Intel-PROSet-Wireless-software-for-Windows-8-1-

  Bluetooth:

  https://Downloadcenter.Intel.com/download/25343/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-8-1-32-bit-WP-

  PCI device: first driver on the Web page...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• HP 810 G3 revolution: HP revolve 810 G3 impossible to image,.

  Try to image the G3 810 via SCCM 2012r2, injected I217 Intel(r) connection Ethernet-LM c. 12.12.80.19 to support start-up, but every time I get "cannot find a valid network adapter."

  

  Here's the smsts.log file:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  [[ourceIdentified'] LOG]! >
  
  
  
  
  
  
  Unspecified error (error: 80004005;) (Source: Windows)] LOG]! >
  For more information, contact your system administrator or helpdesk operator.] JOURNAL]! >
  
  
  

  I have them form HP: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7429243&swItemId=ob_147677_1&swEnvOid=4158

  Once you download this, you can use winZip, 7Zip or your choioce of utility to decompress.  Once unziped, there will be a setup.exe and a "Flat" folder  Each (64/32 bit) operating system is in the flat files - divers only.

• Revolve 810 G1 keyboard characters when you type

  Hi all

  Just got a new HP turn 810 G1 tablet / laptop (12 GB memory 256 GB SDD). Otherwise, things are smooth, but it is extremely annoying problem of keyboard abandonment / jump / lose some of the characters when entering. It is not random, specific keys or combos. So far in this post, he jumped about 10 characters. It does not require typing fast, even in the start menu Win 8, when you search for an app and then hit enter to start the application, it could not react on the press of entry. It is just an example, letters are missing from any where as I type. I type pretty fast and know I'm hitting the right keys. Disable the touchpad does not help, it's not that I would accidentally touch it as you type.

  I've updated the BIOS, restored the OS to factory State (full restore HP), go to the English localization of OS, installed all the updates of Windows - no help.

  This makes work a pain, it is not possible to cat or document type when you need to go back and correct the errors that you have not done all the time.

  HP Support Assistant is not find more updates, number of product H5F12EA #AK8, WIn 8 Pro 64-bit. I installed a 8GB SODIMM under the back cover, included 4GB chip replacement. Will run a memtest overnight.

  Anyone the same light?

  tonttuz

  Hello

  Update of the situation-

  Nothing doesn't I could do thorough tests (including memory) HW run, tests the user added 8 GB SODIMM removed, SIM card removed, removed battery (switch required), full restoration of BONE made a couple of times (END / ENG locations), HP Support Assistant Windows Update patches applied, another keyboard + touchpad drivers of the repository product drivers downloaded and installed, the settings keyboard and touch twisted and applied a pious hope of heap.

  Called HP and at least one portable old of the week will now be replaced by a new. A few more lost days, I hope it'll work at least!

  tonttuz

• revolve 810

  I have before me a 810 turn EliteBook with a blank disc (no recovery partition). I have not any restoration or recovery media. Where can I get something to perform a restore factory on this unit?

  Phone order t HP recovery media. The numbers in the world can be found here > >Contact HP

• Revolve 810 and SCCM 2012

  I'm trying to deploy an operating system via SCCM 2012 a 810 turn and I'm having no luck with the driver for the CARD. I loaded the driver downloaded in SCCM and it is important without error but don't deploy. I put the driver on a usb key and it will load fine.

  Look in the file INF of the PCI VEN number is not there for the hardware in the Device Manager, is the right driver?

  Any suggestions on getting this driver to work with SCCM?

  This driver from Intel has solved the problem for me:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3299 & DwnldID = 18713 & Keyword = 82579LM + Driver & lang = eng

• all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

  I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

  Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

  Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

  This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

  There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

  Missing/partial prints & printer offline on Windows 8/8.1<>

• BIOS password needs reset

  Hi all

  I need help because I can not remove the BIOS password. I forgot it. I contacted HP Customer Service and received the email from HP that contains the MSC file.

  I took the following measures in the e-mail

  Please follow these steps to clear the BIOS password:

  Save the attached file in this e-mail on USB than SMC. BIN and insert into the system (or save the file to the root of drive d: HP_TOOLS)
  -Press 'Key + arrow UP key + arrow down key Windows' all keys at the same time and turn on the system
  -Release all keys and press F10 at HP logo to go to F10 setup for "Reset BIOS to factory default security"

  Please make sure that the USB is formatted in FAT 32

  Is that what I'm doing wrong. I'm also not sure of the date and time in the BIOS, it is anyway to check it without the password.

  Thanks for the help in advance

  Keita.

  Only 2 options.

  Contact HP.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003

  Or replace the BIOS chip.

  http://www.eBay.com/ITM/HP-EliteBook-950-840-755-745-725-revolve-810-G1-G2-new-BIOS-chip-no-password-/291251380919?PT=US_Motherboard_Components&hash=item43cfef62b7

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• 27 - n102a: can I use All In One as a second monitor?

  Hello!

  I have a couple of laptops and would like to know if I can use my HP 27 - n102a as a second monitor for them. One is an HP revolve 810 and the other is an Asus, well that do not know if it matters.

  My HP turn seems to have a DisplayPort and my Asus has a mini HDMI port.

  Thank you!

  Hello

  No, the following link shows its specifications:

  http://support.HP.com/SG-en/document/c04869600

  It has the HDMI port on the back

  Figure: SunstreakerT back i/o ports

• Cannot perform a recovery

  W3 - 810 Windows 8.1 Iconia Tablet

  I have...

  2 recovery discs that came with the Tablet

  MIC USB OTG cable double Hub

  ASUS external 8 x DVD writer /AR / engraver Slim Drive (recommended by Leonid)

  I have connected the dvd/rw to the Tablet using cable micro usb otg hub. The Tablet has recognized the dvd/rw, BUT...

  When I tried to do a recovery using this method

  http://Acer.custhelp.com/app/answers/detail/A_ID/32036/~/Iconia-w3-810-recovery-using-Acer-recovery-...

  I could go up to the #8 stage.

  At the time wherever I inserted the recovery disk #1, the Tablet sent me directly on the desktop. Never had the chance to perform step #9.

  What I've done wrong?

  AutoPlay is enabled and the setting is correct.

  P.S. The dvd/rw external Ausus writer came with a dvd labeled ASS DVD SUITE.

  What I do with it?

  I'm spposed to execute first in order to activate the dvd/rw drive?

  Maybe that's my problem, I do not use it?

  If the DVD player has it of own power, or is it plugged into a powered hub?