Right on drive C or any other Windows Explorer click Close.

Similar Questions

• How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  When you install a program, you normally have the opportunity to take the default or custom installation.  If you choose custom, you can specify where the program will be installed.

  Good luck.

• Can not find the drive C or any other players

  When you click on my computer it searches for a long time and can't find my c drive

  Hello
  
  Did you make any changes before the show?
  Step 1:
  Start disk management:

  a. log on as an administrator or as a member of the Administrators group.

  b. click Start, click run, type compmgmt.msc and click OK.

  c. in the console tree, click disk management. The disk management window appears. Your disks and volumes appear in a view chart and the list view. Pour personnaliser customize your perception of your disks and volumes in the upper and lower panes of the window, point to top or bottom on the menu display , and then click the view you want to use.

  Note:
  Let us know what appears in disk management.
  
  Step 2:
  I suggest scan SFC (System File Checker) on the system and check if the problem persists. Follow the steps mentioned in the article below.
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true
  
  You can see the following link for more information:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
  Let us know if it helps!

• Vista search causes Windows Explorer to close unexpectedly

  Several recent research of Vista have caused Windows Explorer to close unexpectedly; no suggestion, no results, just endless search followed by a short message. The dialog box and in the search window, then close. I am running Vista Home Premium on a Sony Vaio VGN-NS140E with 3 GB of RAM. Overall, I had terrible results with research. Any help out there?

  Hello Jotuna,

  Thank you for using the Microsoft Windows Vista Forums.

  What version of Internet Explorer do you use?  You have recently updated for Windows Vista?  How long this problem has been produced?  If you use Internet Explorer I suggest using the link below. The link must ask questions where your operating system to try to determine the cause for Internet Explorer to quit unexpectedly.
  http://support.Microsoft.com/GP/pc_ie_start

  Please let me know if this helped or if you have any other questions. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Computer infected with the virus. USB drives no longer appear in Windows Explorer.

  Original title: attack viruses, help...

  My friend has a computer that is running windows XP. She asked for help on what to do when several virus has infected his computer.

  I tried my best, but the virus has turned off. The Task Manager, msconfig are impossible to perform. the computer had a virus which is the reason why it continues to be infected. The last scan I made from a usb key which has been infected to leave the computer has revealed five different viruses and worms, each of them spread through usb drives. It's the worst case of infection, I had ever seen.  I tried to scan with the scanner but it did not work. The computer crashed, and when I turned it on things have become much worse. USB drives no longer appear in the Explorer, the computer reads no more and the old xp theme has disappeared, his running today on classic. Help me please.

  Please follow the steps below:

  On a friend or a member of the family computer, download the files installation and update Malwarebytes from the links below, copy them to a CD or a flash drive, then transfer the files on the problem machine and use them. If you cannot start the computer in 'normal' windows, try to install, update and running AFTER the computer scans are started in Mode safe... I use the sites below to download the installation file and the manual update:

  Once downloaded and before moving the machine to the problem, rename the Setup file "mbam - setup.exe" to something like "Gogetum.exe", and then copy the installation file and the update on a CD or a flash drive file... Transfer the file to the problem machine, install the "Gogetum.exe" file, and then run the update for the current program... After that, run a full system scan and delete everything it finds.

  Install Malwarebytes-download link (by clicking the links below will immediately start the download dialog window.)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  Then download the SuperAntispyware program and the manual update of the links below. After you run the Malwarebytes tool that above, if you still cannot download and install directly from the problem machine, download it to a friend or a family member computer as well. After installation and update SuperAntispyware, run a full system scan and delete everything it finds as well. As before, you may need to rename the Setup file for the Setup program. :

  SuperAntispyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  Update of the manual of SuperAntispyware

  http://www.SUPERAntiSpyware.com/definitions.html >

  ____________

  Power Eraser

  http://security.Symantec.com/nbrt/NPE.aspx?lcid=1033>

  Stinger

  http://www.McAfee.com/us/downloads/free-tools/how-to-use-Stinger.aspx>

  UTC/GMT is 05:20 Monday, April 2, 2012

• Why Windows Explorer keeps close unexpectedly?

  Shutsdown - close unexpectedly after short periods of time
  -You run several virus checks
  -Problem seems to appear after importing a large amount of images and video

  Hello

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• BitLocker encrypted laptop USBs open on any other Windows PC?

  Hello

  Running Windows 7 ultimate and have encrypted a 2 GB and 32 GB Flash DRIVE using Bitlocker program that resides in the Windows 7 operating system.

  Have looked for answers online / on this forum and I'm still unclear whether encrypted flash drives can be opened on the PC they were encrypted on? It is important that any damage caused to the 'mother' PC would mean that the encrypted USB drives are useless.

  To clarify, would like to ensure that these flash drives can be opened through Bitlocker on any computer that has installed Windows/BitLocker.

  Pretty sure that I do not use Bitlocker to go as I had never heard of the front.

  Any advice would be much appreciated!

  Thank you

  Bootsyjam

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you return the article mentioned below to learn more about BitLocker. Hope that these articles will help you get answers to your questions.

  You can use BitLocker Drive encryption to protect your files on a disc. BitLocker can help the hacks to access the files on the system, that they rely on to discover your password, or to access your drive by physically removing from your PC and install it in another. You can always connect to Windows and use your files as you normally would.

  BitLocker frequently asked Questions (FAQ)

  BitLocker Drive encryption

  Overview of BitLocker Drive encryption

  Note: This article is for Windows Vista, but also applies to Windows 7.

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows.

  Kind regards

• No driver installed for any other device

  How to identify and download the driver for the universal series (USB) bus controller.

  Other devices in the Device Manager icon and the computer in both devices and printers have a yellow exclamations.  In the properties of the window for the icon of the computer is listed as hardware ID

  PCI\Ven_8086 & DEV_1E31 & SUBSYS_05431028 & REV_04
  PCI\Ven_8086 & DEV_1E31 & SUBSYS_05431028
  PCI\Ven_8086 & DEV_1E31 & CC_0C0330
  PCI\Ven_8086 & DEV_1E31 & CC_0C03

  The hardware ID exact same are also for other devices in Device Manager.  The icon of the computer in devices and printers has my computer name.

  Until I uninstalled the driver for other devices, the icon of the computer was named unknown device, but now it's LIGHTELLEN-PC.

  I tried to update the driver, but Windows Updater cannot find a driver.  I have Windows, turned on automatic updates, but have selected download updates but let me decide whether to download and install them. I don't know how to identify the driver updates.  I checked all the boxes (4) to choose how Windows can install updates.

  Someone can tell me how to locate, download, and install this driver?  I would like to get rid of the yellow exclamations in devices and printers, and in Device Manager.

  I have a Dell XPS 8500.

  Check here to see Ellen, under "Chipset".

  XPS 8500

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-8500

• I can't open the store windows 8 or any other windows application

  Separated from this thread.

  is that the same scenario even if I did nothing... or update anything...

  because I also have this scenario... my apps... just like the camera, bluetooth, windows store, photo, facebook, twitter... does not open...

  and if I do this procedure... it affect my apps installed... like microsoft office... it will be automatically uninstall?...

  Hi houari,.

  Thanks for posting the request in Microsoft Community Forums.

  In this thread are what procedure or suggestion you referring?

  We will analyze and identify the cause of the problem. The steps described here.

  Method 1:

  I recommend to run the troubleshooter app and proceed as described in the article.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  If the problem persists, you can reset the cache to store and see if it helps.

  a. Swipe-at rates from the right edge of the screen and then tap search. (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

  b. Enter run in the search box and then press or click run.

  c. Enter the command wsreset.exe run and then press or click OK.

  Method 2:

  You can also scan SFC to check if there is any corrupt system files.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Let us know the results. Respond with more information so that we could help you more.

• In Facebook, when I click to view any other window (list of notifications, chat list, list of parameters, etc.), the lists do not stay upward

  Whenever I click on something to Facebook to display another window/list, the list is not stay in place. It closes automatically

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• 'Send e-mail' WORDPAD or any other Windows word program

  I use WORDPAD to state my problem. At the same time, I have clk that would appear to the 'Send e-mail' tab and my MSN mail login and my mail client would be automatic with the format of the e-mail message. Now when I clk tab 'send e-mail' in WORDPAD, I get a message saying that I don't have a default e-mail program set up. When I look at my default programs it looks identical to my other PC I can send it by e-mail to the WORDPAD program. I have Windows 7. Do I have to have it working again?

  In virtue programs by default, choose your e-mail client based on the Office program (such as "Outlook Desktop" for example), then click on "set default programs" and he has to fix the possibility of using it for you.

  It will look like this:

  

• USB flash drive shows only not in Windows Explorer.

  Hello

  I looked through all the other posts of undetectable usb flash drives but not talked about "Device Manager", where I can see the "F:" drive - I know not how to access because its not visible anywhere else.

  It is a simple flash 4 GB dongle, I'm on Windows 7 - it used to work properly and appear in my computer, but this isn't all of a sudden. It does not appear on other computers, but I can see it under ' devices and printers under "Mass Storage Device" - and "navigation files" gives me a gray would be on "removable disk F:"

  Have a formatting or something by accident or changed a setting that makes it invisible. Or is it just screwed!

  Help, please!

  Original title: can not access a drive USB flash but visible in "Devices".

  Hello Justin,

  Thank you for your response.

  Because the problem is specific to a specific USB key, I recommend you contact the
  Manufacturer and check with them.