Laptop taking longer than usual to start time

Similar Questions

• Satellite L735 take longer than usual to start

  My toshiba Satellite L735 took more time than usual for what it starts (more than a minute, takes usually 40 dry) gave it to the service center, they said they will update the BIOS, optimized computing processor, formatted.

  Again, it was beautiful, but the problem was back in less than a month, he took once again, the person at the counter just reduced unnecessary programs from startup list, came home to notice it took even more time to start (more than 2 minutes).

  When I turn it on, its fine all get the logo windows in no time, but after a black screen appears and remains for about a minute and a half, then the home screen appears, the startup sound in windows that is supposed to play as soon as the home screen plays on 40 dry aftr homescreen appeared.

  Help, please.
  Thank you.

  Hello

  The laptop seems to load windows slowly because too many processes would be loaded initially.
  First of all, I recommend to download and install the CCLeaner. This freeware tool would help you to clean the registry and remove the waste from the system.

  In addition, you should check your processes that would be loaded initially.
  Run msconfig and go to the Startup tab. Here you can disable any process necessary and not important.
  I put t know how much computer experience you have so be careful with that.
  If you n t know what exactly does the unique process, google for more details.
  Remove a mark of close process will disable this you can later too

  In addition, I would recommend checking your anti-virus software, I switched from Norton Antivirus software Avira Antivir because it is much faster and does not require a lot of hardware resources the Avira antivir is freeware software so you can install and use for free.

  Last but not least to defragment the HARD disk in order to ensure access to data faster

  Good luck

• Unsuccessful login message - error message after "connection to the network is taking longer than usual"

  -All right, so I won't try to describe my problem by telling you what happens when I try to connect to any other network that my own home network (a school, work, network etc.).

  First of all, I try to connect and I get the message:

  "network connection takes more time than usual ' which of course is soon followed by the message"connection failed"after which said the logo of the network on the lower corner of the taskbar"

  this computer has limited or no connectivity"click to run a repair and three options including".

  automatically get new ip for the "wireless network connection" network card settings«»

  Reset the network adapter', and there is no internet here (I'm paraphrasing this one of course). "

  Now, sometimes if I click on one of the service options and the connection starts immediately, sometimes I have to click two options, one after the other fails to solve the problem, sometimes, I have to click on them each several times before it works (you one and two of another, for example).

  most of the time receiving the message ' windowstried a repair but a problem persists. " This computer has limited or no connectivity"between the stages of repair. I know that of not explore because I used mozilla firefox and google chrome and I get the same problem. I even tried to reboot once the connection has failed the first time. My computer is up to date and I have passwords for my school and respective secure networks of works.

  Y at - it as any indication of what could happen here for me to have to reset and click and wait and fix almost every time that I get on any network, but my home network?

  Thank you for your time,

  Bryan

  Hello

  Hello

  You scan the computer and make sure that it is clean of viruses and malware.

  Download the latest drivers for the wireless card from the support page for the manufacturer of the laptop computer and update the drivers for the card.

  After that.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  -----------------------

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite U500 - 18K PSU8SE needs more than usual getting started

  Hello world...

  I have two questions:

  the last time I have said that I have problem with the start, take my notebook time more than usual to start windows and advice you reinstall me my windows, so I don't make...

  Now, when I install the update I discovered that the problem is back and the nvidia update cause sound.
  How do I?

  First of all when I had the problem with the installation of updated nvidia so I tried installed in safe mode so its success, but I always had the same problem with the start?
  So, what can I do?

  My second question her on the deletion of point restor...
  Can I delete some restore points and keep the other?

  My laptop Info: Satellite U500 - 18K (PSU8SE) operating system: Windows 7 64-bit

  First I put t understand why you open a new thread on a topic.
  Follow one you created some time ago to avoid any misunderstanding:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208725

• RMAN takes longer than usual to the database backup cars.

  Hi all

  I have a database of CARS 2 nodes (11.2.0.3) using ASM on OUL5x64 (DB1/DB2) the backup script was running on DB2 for the past 3 years without problem.

  backup with compress is 80 GB Sunday.

  level Inc 1 day = 20 to 30 GB)

  I just added 2 other nodes to this CAR, now there DB1, DB2, DB3, DB4

  moved the backup to DB4 script and set up all of the environments for this work.

  The first 2 days, it did increase normal level 1 backup around time (20-30 GB) between (1 h 30 min)

  but on Thursday which is always increase of LEVEL 1, it took 8 hours to do the job.  and when checking the size

  the backup, the size was 255 GB level 1 (s/n 20/30 GB) and today it did the same.

  Please give suggestions as why backup is so huge.

  Thank you.

  Here's the script.

  RMAN target / < < EOF

  echo setting

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / u02/%F';

  Run {}

  allocate channels d1 type disk maxpiecesize 5 g;

  allocate channels d2 type disk maxpiecesize 5 g;

  Compressed backupset backup

  format ' / d01/pr1/pr1_%s_%t_%p.dbf'

  extra strength 1 cumulative

  Skip inaccessible

  tag hot_db_bk_level1

  filesperset 4

  (data include current controlfile);

  # sql 'alter system archive log current';

  #Backup all archive logs

  Compressed backupset backup

  format ' / d01/pr1/pr0_%s_%t_%p.arc'

  Ark of the tag

  filesperset 4

  (archivelog all delete all entries).

  }

  Hi all

  After you resolve the problem, the support of Oracle pointed out that

  I hit the limit in this note:

  How many incremental backups can be taken when the OWA is enabled? ( Doc ID 452455.1 )

  the default value

  _bct_bitmaps_per_file = 8

  in my case, I ran more than 8 times in the week. sous-séquence then run don't use BTC (block_change_tracking)

  After running a backup full again, backup works like it suppose to.

  Thanks for the replies.

  Kind regards

• Turn laptop slower than usual, help

  
  

  My laptop runs slower than usual. I thought that a disk cleanup or defragmentation will improve the beginning upward and and connection to the email. Fix? Or another suggestion? I have Windows 7.

  Wednesday, December 8, 2010, 06:14:12 + 0000, youngalltheway wrote:
   
  > My laptop runs slower than usual. I thought that a disk cleanup or defragmentation will improve the beginning upward and and connection to the email. Fix? Or another suggestion? I have Windows 7.
   
   
   
  First of all, please note that you asked that question you on Windows 7
  in a forum of Windows Vista. In the future, please ask in the right
  place.
   
  But because the version of Windows without doubt whatever here, let me
  to answer your question.
   
  According to what you clean, a 'disk cleanup' * may * help a little.
  but the defragmentation is unlikely to have any effect at all. Nevertheless, it
  does not hurt doing these things.
   
  If the computer is running more slowly than usual, still probably the most
  probable cause is a malware infection. What anti-virus and anti-spyware
  the programs that you are running? If they are updated?
   

  Ken Blake, Microsoft MVP

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• Applications take more time to load than usual upward

  Welp, it seems that I am slowly solve all my problems gradually. I hope that you guys don't mind help me again. : s

  So I just found out tonight that my programs take longer to load than usual. Like, for example say that when I open Windows Explorer, it normally loads the thing whole file in less than a second. But when I got home today, I discovered that it takes 1 to 2 seconds to load the screen. The computer itself is not so slow. My Internet is fine and I'm typing this without any problem. But keep in mind, I noticed what happens as soon as I logged in, then it may be nothing to do with the slow transformation or whatever. However, windows start on the "Windows is not stopped correctly - please select the startup option that you want to load windows" or something, and then there ' start it in Safe Mode "etc..
  Although I stopped him correctly, if I recall accurately. I press the turn-off button in the start menu and let him do his own thing, so I don't know why it does this, because it normally only that when I "force close" my computer, aka holding down the power button until it turns off. Also, after I chose the "start Windows normally" option, he has been blocked on the 'Windows logo ' loading screen for about a minute before it instantly loaded to the top of the login screen.
  I hope this is enough information. Although this could just be a simple matter to restart the computer to solve the problem. I will restart after I have this post and update on the issue. Also, I remove a Trojan recently. I know that the Trojan horse was not too old, because I recognize the directory or the program it was found, as it was a program that I removed. But I will now reboot and see what happens. If you guys have any other advice that would be great.
  See you soon!
  
  
  Update: Yep, all I had to do was restart it. Ridicule me. : 3
  Well, it works fine now. Hooray! : D

  Hi Lachlan,

  Glad to know that your computer works all fine now.

  Please let know us if you have problems with Windows and we would be happy to help you.

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• laptop no longer meets the entry of a few seconds after starting

  computer HP laptop with windows 7 - once computer starts, you can move the pointer of the mouse (with the touchpad), but nothing happens on either left or do a right click.  only way to stop the computer is to turn it off.  was working fine until I updated my AVG for 2015...

  Anyone else run into this?  found a solution?

  I press F8 at startup to start the computer in Mode safe, then use system restore to restore Windows to a point before the AVG update.

• My screen is darker than usual. How can I brighten it?

  My screen is darker than usual.  How can I brighten it.

  If you have a laptop/netbook computer, try your power settings.

  Click Start or press the Windows key and type power but do not hit . Click Power Optionss of the section of the Control Panel in the list above.

  

  You can adjust your screen brightness using the slider to the center of the window Power Options nottom. Closing the window will keep your new settings.

  It is also very likely that one of the keys on your keyboard (possbily in combination with the Fn key) will increase or decrease the brightness of your screen. See the documentation that came with the computer, the Google brand and the model of the computer with black screen number or it someone here may be able to help more supply.

• Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

  Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

  Hi motionpicturedirector,

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.

• XPS 15 much warmer than usual, running for the last week

  I have a XPS 15 laptop with SSD drive and plenty of RAM which usually remains cool. Last weekend he installed an update of Windows 10 (I think it was the version 1607). Since then the fan worked upstairs while the laptop is turned on and it feels warmer than usual. The CPU load can be less than 20% for an extended period, but the fan continues to run. I managed to go back to the previous version of Windows and it has not changed.

  The only thing that worked partly is to limit the maximum level of the CPU at 50% (I tried to use this setting on the battery and then unplugged the laptop). This cut the fan at a lower level, but I never had to do before. So far, the fan would rarely work at all.

  What is going on? Do we need updated drivers?

  It's very strange. I was watching the new to-do Manager trying to figure out why it's so hot when the CPU load is 20%. Upstairs, he said Intel Core... @ 2.2 GHz. On the right, it indicates the maximum speed: 2.2 GHz. On the left, he said speed: 2.9 GHz (sometimes going up to 2.8).

  If I put the State of maximum CPU at 99%, it falls down to 2,18 GHz, if I put it at 100% it goes back up to 2.9 GHz. I don't remember what he showed before it started, but this sounds very wrong. In both cases it is going above 2 GHz, even if the processor is not much used, but I guess it's ok if it is not overheating. It is already cooled down in a few minutes and I'm waiting to see if the fan breaks down.

  Apparently he did this during the last week and a half. What happens here? Dell release a updated driver overclocked my CPU?

• Slow down the start-time program: 13 Yoga Win8

  Hey guys,.

  I have heard some other people about this problem, but could not find a thread on this subject.

  A few days after I got my 13 of Yoga, I noticed that programs including metro apps, calendar, weather, etc., can take longer than 15 seconds to load up whenever I try first to launch. In addition, there will be moments where a metro app load for 20 seconds and then the report just an error message it crashed.

  Everyone knows this? Outside of Office 365, Chrome, and Firefox, I have not installed anything on this computer.

  Any suggestions?

  See you soon!

  Thanks VFC. This suggestion seems to have worked.
  I use McAfee Internet Security that comes with the Yoga13 - and when I disabled it 'Analysis in real time' my programs are now open almost instantly and are much more sensitive. I don't know if there is a problem with this particular material not like McAfee so much, or maybe its just McAfee. I know Norton has worked great on all my systems. I will try to move on to the next.

  See you soon!