Satellite L735 take longer than usual to start

Similar Questions

• Laptop taking longer than usual to start time

  Hello everyone. It's been about a month, my laptop takes about 10-15 minutes to get started (happens once in every 10 to 12 days, while usually it takes about 4 minutes). I turned off unnecessary startup programs, but it still happens.
  My current operating system: Windows 8

  RAM: 4 GB

  HARD DRIVE: 500 GB

  Graphics card: Nvidia GT640M

  Thanks in advance...

  Hi rap.

  1. do you get an error related to the question message/code?

  2. you did it any hardware/software changes to the computer before the show?

  3. What is the brand and model of the computer?

  Too many unused folders and subfolders can affect the performance of the laptop.

  Method 1:

  Disconnect or disable any external devices (printers, scanner, USB (universal serial bus) drives, sound card and graphics card etc.) except the mouse and keyboard and then boot\start the computer.
  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.

  Method 2:

  Run the system maintenance troubleshooter.

  a. press the Windows key + W on the keyboard.

  b. type Troubleshooting , and then click settings under the search field.

  c. click on find and solve the problems.

  d. click on system and security.

  e. click on follow-up of the maintenance of the system; the guests there and check.

  Method 2:

  Check out the link and follow the steps to improve the performance of the computer:

  Improve performance by optimizing your drive

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• RMAN takes longer than usual to the database backup cars.

  Hi all

  I have a database of CARS 2 nodes (11.2.0.3) using ASM on OUL5x64 (DB1/DB2) the backup script was running on DB2 for the past 3 years without problem.

  backup with compress is 80 GB Sunday.

  level Inc 1 day = 20 to 30 GB)

  I just added 2 other nodes to this CAR, now there DB1, DB2, DB3, DB4

  moved the backup to DB4 script and set up all of the environments for this work.

  The first 2 days, it did increase normal level 1 backup around time (20-30 GB) between (1 h 30 min)

  but on Thursday which is always increase of LEVEL 1, it took 8 hours to do the job.  and when checking the size

  the backup, the size was 255 GB level 1 (s/n 20/30 GB) and today it did the same.

  Please give suggestions as why backup is so huge.

  Thank you.

  Here's the script.

  RMAN target / < < EOF

  echo setting

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / u02/%F';

  Run {}

  allocate channels d1 type disk maxpiecesize 5 g;

  allocate channels d2 type disk maxpiecesize 5 g;

  Compressed backupset backup

  format ' / d01/pr1/pr1_%s_%t_%p.dbf'

  extra strength 1 cumulative

  Skip inaccessible

  tag hot_db_bk_level1

  filesperset 4

  (data include current controlfile);

  # sql 'alter system archive log current';

  #Backup all archive logs

  Compressed backupset backup

  format ' / d01/pr1/pr0_%s_%t_%p.arc'

  Ark of the tag

  filesperset 4

  (archivelog all delete all entries).

  }

  Hi all

  After you resolve the problem, the support of Oracle pointed out that

  I hit the limit in this note:

  How many incremental backups can be taken when the OWA is enabled? ( Doc ID 452455.1 )

  the default value

  _bct_bitmaps_per_file = 8

  in my case, I ran more than 8 times in the week. sous-séquence then run don't use BTC (block_change_tracking)

  After running a backup full again, backup works like it suppose to.

  Thanks for the replies.

  Kind regards

• Satellite U500 - 18K PSU8SE needs more than usual getting started

  Hello world...

  I have two questions:

  the last time I have said that I have problem with the start, take my notebook time more than usual to start windows and advice you reinstall me my windows, so I don't make...

  Now, when I install the update I discovered that the problem is back and the nvidia update cause sound.
  How do I?

  First of all when I had the problem with the installation of updated nvidia so I tried installed in safe mode so its success, but I always had the same problem with the start?
  So, what can I do?

  My second question her on the deletion of point restor...
  Can I delete some restore points and keep the other?

  My laptop Info: Satellite U500 - 18K (PSU8SE) operating system: Windows 7 64-bit

  First I put t understand why you open a new thread on a topic.
  Follow one you created some time ago to avoid any misunderstanding:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208725

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• Unsuccessful login message - error message after "connection to the network is taking longer than usual"

  -All right, so I won't try to describe my problem by telling you what happens when I try to connect to any other network that my own home network (a school, work, network etc.).

  First of all, I try to connect and I get the message:

  "network connection takes more time than usual ' which of course is soon followed by the message"connection failed"after which said the logo of the network on the lower corner of the taskbar"

  this computer has limited or no connectivity"click to run a repair and three options including".

  automatically get new ip for the "wireless network connection" network card settings«»

  Reset the network adapter', and there is no internet here (I'm paraphrasing this one of course). "

  Now, sometimes if I click on one of the service options and the connection starts immediately, sometimes I have to click two options, one after the other fails to solve the problem, sometimes, I have to click on them each several times before it works (you one and two of another, for example).

  most of the time receiving the message ' windowstried a repair but a problem persists. " This computer has limited or no connectivity"between the stages of repair. I know that of not explore because I used mozilla firefox and google chrome and I get the same problem. I even tried to reboot once the connection has failed the first time. My computer is up to date and I have passwords for my school and respective secure networks of works.

  Y at - it as any indication of what could happen here for me to have to reset and click and wait and fix almost every time that I get on any network, but my home network?

  Thank you for your time,

  Bryan

  Hello

  Hello

  You scan the computer and make sure that it is clean of viruses and malware.

  Download the latest drivers for the wireless card from the support page for the manufacturer of the laptop computer and update the drivers for the card.

  After that.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  -----------------------

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• FF takes longer than Chrome to begin

  I have been using ff for 2 years. I noticed that when comparing chrome one ff, FF takes a long time to start.
  I used these plug-ins:

        Adobe Acrobate 10.1.9.22
        Java deployment Toolkit 7.0.650.20 10.65.2.20
        Java(TM) Platform SE 7 U65  10.65.2.20
        Shokewave Flash 13.0.0.214
        Silveright Plug-In 5.1.30214.0
        VLC Web Plug-in 2.1.3.0
        VLC Web Plugin 2.0.6.0
        Picasa 3.0.0.0(Disabled)
  and Themes:
         FT Deep Dark 10.3.8   (using now)
         3D Digital Blue Dlow
         Default 30.0
         LavaFox V2-Green 2.2.6
         Metal Lion Austrails Theme 2.0.1.4.91
         Simple White 2.1.4
  

  enrichment:

         AdBlock Plus 2.6.3
         avast!Online Security 8.0.1506
         Download Status bar 10.1.0
         Youtube ALL HTML5 2.1.3
         Lightbeam 1.0.10.1    (disabled)
  

  Windows is Windows 7 64-bit, RAM DDR3 2 GB.

  To remove VLC, type about: plugins in your address bar, scroll down until you see the VLC plugin and delete the dll file pointed by ' path:'.

  It can also help to disable hardware acceleration, as pointed out by multiple users.

  To disable hardware acceleration follow the instructions in the post following disable hardware acceleration.

  I noticed Firefox slower than Google Chrome spear as well.

  It's good to hear that Firefox is faster in safe mode.
  Safe mode is faster because it turns off a lot of different modules, plugins and other things.

  Maybe have a look at the plugins as well in the plug-ins section and disable those you don't use often.

  You don't have to remove completely the plug-ins, but you can disable them also teporarily. In the menu dropdown.

  To completely remove a plug-in you can uninstall the software that comes with it. To do this take a look at this article: remove the Plug-ins.

  I don't expect Firefox to become as fast as Chrome, but following the steps above, I think that Firefox can speed up considerably.

• Shut down Windows takes longer than 3 minutes

  Separated from this thread.

  When I stopped in Windows 7 the "Shutting Down" screen stays on for more than three minutes. I tried to start in safe mode, but I get the same result. I tried to disable third-party programs and get the same result.

  It's annoying when you have to restart.

  Frederik

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• Scans of partition take longer than a full table on a non-partitioned table scan?

  Hello

  I have a PART_TABLE range partitioned table that has 10 million documents and 10 partitions having 1 million records each. Partition is based on a column named ID, which is a sequence of 1 to 10 million.

  I created another P2_BKP table (do a select * from part_table) which has the same group of data than that of PART_TABLE, except that this table is not partitioned.

  Now, I run the same query on the tables to get a range of data. Precisely, I'm reading only the data present in 5 partitions of the partitioned tables that requires theoretically less reading than when done on non partitioned tables.

  Yet the query seems to take more time on a table that is partitioned only when running on a non-partitioned table. No reason precisely why is this the case?

  Here's the query I am trying to run on the tables and their Plans to explain corresponding.

  ASK A

  =========

  Select * from P2_BKP where id < 5000000;

  ----------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  ----------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |        |  6573K |   720 M | 12152 (2) | 00:02:26 |

  |*  1 |  TABLE ACCESS FULL | P2_BKP |  6573K |   720 M | 12152 (2) | 00:02:26 |

  ----------------------------------------------------------------------------

  QUERY B

  ========

  Select * from part_table where id < 5000000;

  -------------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

  -------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |            |  3983K |   436 M | 22181 (73) | 00:04:27 |       |       |

  |   1.  RANGE OF PARTITION ITERATOR.            |  3983K |   436 M | 22181 (73) | 00:04:27 |     1.     5.

  |*  2 |   TABLE ACCESS FULL | PART_TABLE |  3983K |   436 M | 22181 (73) | 00:04:27 |     1.     5.

  -------------------------------------------------------------------------------------------------------

  016f62a3-35cf-4f4e-B812-95774e4d662f wrote:

  Now, I run the same query on the tables to get a range of data. Precisely, I'm reading only the data present in 5 partitions of the partitioned tables that requires theoretically less reading than when done on non partitioned tables.

  Yet the query seems to take more time on a table that is partitioned only when running on a non-partitioned table. No reason precisely why is this the case?

  Have you actually run the queries, or you assume that they will take different amounts of time because the execution plans show different numbers?

  It is clear from the output of the execution plan that the statistics are not very good, since Oracle should have estimated about 5 M of lines for each request. That said, however, Oracle should have used the counties of partition block level to estimate the cost of the analysis of the 5 score - and we could expect them to a total of less space than a full copy.

  Of course, it is possible that your partitioned table has been the subject of many DML involving the line movement and line of chaining; It is possible he has been the subject of many lots of parallel or direct path loads inserts leaving much free space in each partition. It is also possible that you have created the copy in a tablespace that table of default compression!

  What are the stats for the original table partition level?   (select nom_partition, num_rows, blocks of user_tab_partitions where table_name = 'T1' partition_position order)

  Concerning

  Jonathan Lewis

• Satellite U500 - take a long time to start Windows

  Hello. How are you all? I need your help.

  my laptop Info: Satellite U500 - 18K (PSU8SE) operating system: Windows 7 64-bit

  My problem:
  My time to take cell phone longer than usual to start windows and that I know and look for changes in startup programs list but cannot find changes, I have also all the necessary updates for my laptop and there are no performed by viruses.
  I tried to use system restore, but it has not solved the problem...

  So please help me to get the solution?

  You should check if the tempro installed on your computer, this utility can cause a lot of time to boot. Also check if installed face recognition software

• Satellite P500 and eSATA slowdown system and start

  Hello
  To connect an external drive eSATA system immediately slows to a crawl. A boot would take longer than 30 minutes (not waited so he can start windows) and the drive never shows up when it is plugged since within windows.

  I have a satellite P500 (PSPGSA - 01 G 003) with Win 7 x 64 and 2.9 (latest) BIOS.

  I did a little reading in what the problem might be and have:

  Most of the tips are for "esata disks must be connected before starting for them to be recognized", but then startup is so slow that I can not get into Windows.
  Tried this IDE and back to AHCI in the BIOS.
  Considered "looking for new hardware' in Win7 after having connected the drive/turn on.
  Insured AHCI was enabled through the registry.
  Disk management - check the player never appears.
  Tried downgrading the chip set driver (later).

  To disconnect the cable from the computer immediately accelerating upward.

  EDIT: Just started in ein7 with the drive connected but it was not acknowledged.

  All thoughts are welcomed.

  Thank you.

  Post edited by: scrollop

  Post edited by: scrollop

  Hello

  S far away I know that the eSATA port supports a hot swap function. This means that you can connect the eSATA drive to the laptop after windows system started.

  Have you installed the latest Intel Management Engine Interface driver? (different chipset drive!)

  Remember also that this driver AHCI in Windows 7 can be activated via the registry.
  YPU may modify the following two values of subkey to 0:
  HKEY_LOCAL_MACHINE-System \CurrentControlSet------Services------Msahci
  HKEY_LOCAL_MACHINE \ FAT32\ CurrentControlSet-Services-IastorV

• iPad backup restore take more than two days

  WWas of problems with the battery on my iPad Air life. taken at the Genius Bar at Apple Store. they reset and set up to restore a backup, what they did before. After she came back to the top, they said it would take some time to restore because I have a lot of apps, granddaughter, I went home to finish. It was two days ago. When I go in the backup, it says still iPad is restoration. Should I stop & then restore again? Are they redo the apps that have already been restored?

  Thank you, Cheryl

  Hi cgibson,.

  Thank you for using communities Support from Apple.

  I see that you are going through a process of restoring iCloud on your iPad, and it takes longer than expected.  The speed to iCloud restoring has a couple of factors, including the speed of your wireless network.  For more information on why this process can take some time and how to follow the process, please see below:

  Restore my device from a backup to iCloud takes a long time

  Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

  There are several steps that follow:

  • In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
  • Make sure that your device is connected to the Internet with reliable WiFi.
  • Make sure that your device is plugged into a power outlet.
  • Check the Apple progress bar that is displayed during the transfer of a backup.

  If you need help, restore your device from a backup to iCloud

  Have a good.

• Qosmio G20 147: start-up time takes a bit of time than usual

  Greetings to everyone out there in the land of the QOSMIO awareness! My G20-147 boot time seems to take longer and longer. Why?

  Hi Franklin

  In my opinion, it depends on the configuration of the personal computer and installed applications. As you start to process all applications listed in the Startup should start and if you have a lot of them that can take a longer time.

  In my opinion that you should don t worry about hardware (HARD drive) the features but you should check what unnecessary applications start automatically with Windows startup. You can check it out if you go to START > RUN > MSCONFG > OK. Under STARTUP tab it has listed all the applications that start with Windows. Remove the check mark in front applications you don t need initially.

  To make the fastest device also run Defragmenter and disk cleanup tools.

  Good bye

• Applications take more time to load than usual upward

  Welp, it seems that I am slowly solve all my problems gradually. I hope that you guys don't mind help me again. : s

  So I just found out tonight that my programs take longer to load than usual. Like, for example say that when I open Windows Explorer, it normally loads the thing whole file in less than a second. But when I got home today, I discovered that it takes 1 to 2 seconds to load the screen. The computer itself is not so slow. My Internet is fine and I'm typing this without any problem. But keep in mind, I noticed what happens as soon as I logged in, then it may be nothing to do with the slow transformation or whatever. However, windows start on the "Windows is not stopped correctly - please select the startup option that you want to load windows" or something, and then there ' start it in Safe Mode "etc..
  Although I stopped him correctly, if I recall accurately. I press the turn-off button in the start menu and let him do his own thing, so I don't know why it does this, because it normally only that when I "force close" my computer, aka holding down the power button until it turns off. Also, after I chose the "start Windows normally" option, he has been blocked on the 'Windows logo ' loading screen for about a minute before it instantly loaded to the top of the login screen.
  I hope this is enough information. Although this could just be a simple matter to restart the computer to solve the problem. I will restart after I have this post and update on the issue. Also, I remove a Trojan recently. I know that the Trojan horse was not too old, because I recognize the directory or the program it was found, as it was a program that I removed. But I will now reboot and see what happens. If you guys have any other advice that would be great.
  See you soon!
  
  
  Update: Yep, all I had to do was restart it. Ridicule me. : 3
  Well, it works fine now. Hooray! : D

  Hi Lachlan,

  Glad to know that your computer works all fine now.

  Please let know us if you have problems with Windows and we would be happy to help you.

• MacBook pro takes more than a minute to start

  My Macbook Pro takes more than a minute to start. I though it was normal, but I've seen Macbook Pro my friend and it only takes 15 seconds to start. How to improve the startup time of my Macbook?

  Replace HDD SSD may speed up OS boot as well as launch Applications.