ROKU2 XD - do I need a router wireless wifi - without the computer
I just bought the ROKU2 XD need WiFi. Has NO WiFi. With 2 MACS, I prefer NOT to connect it to the floor to my LinkSYS WRT 54GS V7. MAC is wired. Not sure that the iMAC is wireless or wired this way.
ROKU Watch w black screen / loud buzzing, but seems to be working and necessary condition of a WiFi signal.
Do I need a new wifi wireless router? Go w / ROKU + old PANASONIC TV downstairs. No idea how it works. I don't want to interfere with my old router upstairs. (The new iMAC could be wireless, not sure, but certainly no WiFi...)
Help! I know just enough to get me in trouble. I have a few weeks to figure that this point or I will return the ROKU2 to QVC! Please, if you can answer me, do it fast! Thank you very much!
Candy
If you have a wireless router, it will work. You have a WRT54GS which is a wireless router. Then I'll hang it up.
Tags: Linksys Routers
Similar Questions
-
How to connect the printer wireless hp with the computer?
* - Original title - the printer printing
How to connect the printer wireless hp with the computer?
HP all what you need to be able to complete the task... See here...
http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html
-
Need help phone transfer pictures to the computer
need help, can't get photos from phone to computer
Hi CarlaRoberts61,
If your phone comes with a USB cable, connect your phone to the computer. Your computer should recognize the phone as a storage device. Some phones will ask your permission to allow the computer access to the files on the phone. Be sure to allow access. If necessary. Open the photo library by clicking on the file icon located on the task bar and selecting photos. Follow these steps below to transfer the images below:
- Click on the Start Orb
- Select the computer
- You should see your phone listed under devices with removable storage. Double-click the device to open the files
- Usually, the image file is obvious / if not, check with the manufacturer of your phone.
- Copy and paste the image in the picture library.
-
Wireless hub works, other computers are connected
On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)
Recommended by the system solution: reset or repair your access point or wireless router
How can I do?
I think that what you aim for is "power cycle".
To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.
Hope this helps
Post back if necessary
___________________
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
With the wrt54g router wireless security - separates the WLAN LAN clients
I have a wrt54g router and want to separate clients WLAN access to computers and servers on the local network... in other words, I want to make a 'guest' network I put the router in 'router' instead of 'bridge' mode I want just to be sure if it's the best thing I can do in terms of transforming the network wireless in an isolated.
Check out the 3rd party firmware like dd - wrt.
-
Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.
I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.
-
interruption of the wireless connection with the computer laptop and printer
We have a printer HP6500 we lost the connection Wireless to our Dell laptop. Whenever we need to print to bring the laptop to the floor and connect it with a cable to print. I tried to close the printer downstairs next to the laptop and the router but it would not print wireless. Any other suggestions? Thank you. CK
Hello
Check with HP, their drivers support and online documentation and ask in their forums on any
known issues. As OEM HP is responsible for the good operation of the printer and provided them with
drivers.More than one 6500 printer
http://WWW8.HP.com/us/en/support-drivers.htmlSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Try resetting the printer with the latest drivers.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
The output on the sound output box has no drop downs. The audio output suddenly disappeared and when I went to the 'exit' sound in 'sound preferences' the only thing that would show was the headphones. After that I tried a couple of things suggest that 'Helping Apple', sometimes in digital form & everything that happens you can't change for something else. Things I've tried suggested by Apple press help were the "Shift control option buttons & button / stop at the same time." or press the Option, the command, the P & R key as soon as possible after you have pressed the button On. Hold down until after the second gong during a manoeuvre. This did cause the digital option, but none of these 2 is the one I need. Help
Perhaps, it would be useful to know what that is exactly the one you need. Are get you an external speaker output or anything like that. Also, it would be useful to know the operating system you are using.
-
I'm done with Outlook. Just when I was comfortable at all (new) he crashed and took all my addresses and phone numbers with it. The file to archive only has not and now I'm stuck...
Fortunately, I downloaded my phone list to my Centro (actually I think he did it without asking me) in December. Now, I need to put the list of phone and address of my Centro on my Palm Desktop on my PC.
Anyway easy and inexpensive to do?
Strange... looks like he wants to just sync your SD card, not the device. Try to click on the hotsync icon in your system tray and select settings. Click on Applications and make sure the items you want to sync'd are checked. Also, highlight one of them and click on the button Configure and make sure "Synchronize files" is selected.
Message is about: Treo 800w (Sprint)
-
You will need to download older version, because the computer crashed.
I recently had my computer crash. I need to reinstall my applications, but they are old versions and not listed. Now what?
You can probably (depends on what age) download trial versions of the software through the site linked below and then use your current serial number to activate.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
-
Need to reset firefox every time the computer is off at fast speed
Firefox is slow to respond, I tried to reset, which works when the computer is again the initial term. However, when the computer is restarted, return to slow scrolling problem.
You have disabled hardware acceleration? (not solved reset is usual)
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
-
Operating system - XP
Message asking if I want to send the problem to Microsoft.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353
NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
Microsoft 3500 wireless mouse causes the computer crashes?
I recently bought the microsoft 3500 mouse - I used the 4000 before on this computer, and it worked well and was a good mouse, so I decided to buy it. I installed it last night (Windows had some difficulties to recognize the software), and it worked fine. I left the USB plugged when I turned off the computer.
I tried to start this morning and my computer froze and did not go beyond the screen initial screen/first of the motherboard - it wouldn't even go to BIOS. It started off fine, however, when I disconnected mouse USB and tried to start without him. Anyone has an explanation as to why this is happening?
Check in the BIOS as to ensure that the BOOT sequence does not list USB before the floppy drive / CD / hard drive.
-
Need help, cleaning of viruses on the computer purchased in 2001
original title: I'm pleased if you help me with my Vista
Hello
My name is Boryana K. Kosseva and I'm from Bulgaria, Sofia.A years out, maybe to 2002 or 2001 even, I'm sorry but I don't remember not the data and year, my dad bought a computer from the U.S.The computer was with Windows installed, so I what is original. That's why I was wondering is it possible Microsoft to help me clean some viruses from my computer.
I look forward to hearing from you soon.
Your B.K.Kosseva
Microsoft cannot help you with that, but here are two tutorials on the elimination of the virus:
http://teengeek.freehostingcloud.com/help/scanforviruses/
http://teengeek.freehostingcloud.com/help/scanforviruswithmrt/(they are on a site that I'm hosting)
-
No Internet access - network/router wireless connection problem
I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.
OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!
Maybe you are looking for
-
Satellite L355D - some drivers are missing for Win 64 bit
I received this L355D in a trade for a unit of the computer. Supposedly, he had a virus on it and don't run so the previous owner wiped the drive and installed an operating system Linux on it before offering to me in a job and I didn't have the passw
-
Brand new T440s with BIOS password
Hello I have a big problem. I bought online a new T440s I opened the box for the first time myself. When I go into the BIOS it asks for password and I just hit enter without entering a password. I can get into BIOS but I can't change any settings. Wh
-
CQ56-219WM: restoration of HP software
My hard drive failed in my laptop. I replaced the hard drive with an exact replica. I bought the restoration directly on the site of HP software. When you have finished loading (three disks) and reboot, I get the error mssg. : lack of File:\Boot\BCD.
-
How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP
-
Can I only view content via a video call? Not through local presentations?
Is it possible to display the content on my device, when we're just make a local presentation and not to make a video call?