ROM Qosmio F20 ERROR
Hello
I have a Qosmio F20 and recently there was a problem of windows xp.
In any case, I try to install a new operating system, but at the start of the laptop it says CD ROM of ERROR.
I can't the new system operational istall and cannot use my laptop.
What can I do?
The cd rom error message appears when I start the laptop, with or without the dvd rom is plugged.
Any ideas? the dvd rom is broken?
Thank you
Hello
Please check the BIOS!
You can enter the BIOS by pressing ESC and F1.
The CD/DVD drive must be in the BIOS.
If it s not the case, then that would mean that the CD/DVD drive cannot be recognized by BIOS and possibly it s faulty.
Tags: Toshiba
Similar Questions
-
CD-ROM error at the start after replacing the DVD drive - Qosmio F20-574
OK, so I have a Toshiba Qosmio F20/574 and I am trying to replace the factory DVD player (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD Im reader get a CD-ROM error at startup. The only time where what I don't get, is when I start with the factory DVD player.
Here are the things I've tried...
-Cleared CMOS memory
-Remove the bezel to ensure his grip at bottom
-l' utility EEPROM set the drive to slave.
-tested the portable player in another
-uninstalled the factory dvd player via the Device Manager and tried to boot with the new dvd driveHere are the things that I found bizarre...
-in the BIOS (BIOS 1.30 ACP) under IO device, it shows the hard drive and cd, but it is not listed by name, his watch only the IRQ of the primary and secondary IDE controller (integrated drive HARD IDE primary (1F0H/IRQ14), CD-ROM (170 H/IRQ15) secondary IDE). This does not change, even if I start without a DVD player.
-There is no update available for this laptop BIOS. It is a Toshiba of the Japan and the Ive tried using Qosmio F20 BIOS 1.40 to another region, but this does not work.
-I can't find a firmware for the Liteon DS-8A1P (CX17) updateI can't think of anything to try. I really need help! Any ideas?
I'm afraid that you are using the optical disc drive not compatible and there is nothing you can do. Check it please s user guides document for your model of laptop and you will find a list of all compatible ratings.
-
Qosmio F20 - 437 Application error
Hello
I use the recovery disk to restore my Qosmio F20 to factory settings, an application error 437 a popoed upward during the reimageing process.
I remember upgrading the RAM, and I don't have the original with me.Any help will be appreciated.
Thank you.Hello
Autour Googling, I found thisarticle.
So I ask what may be the solution to your problem. May be corrupt drive recovery? Can you see scratches or stains on it?
-
Qosmio F20-155: error after the beginning of the control panel controls
I installed Win 2000 on a Qosmio F20-155 computer and I get an error like this when I start the TOSHIBA controls control panel. Could someone help me please?
"An error occurred while windows was working with the Control Panel file C:\Program Toshiba Toshiba Controls\ToshSrv.cpl.
Hello
I checked the page of the Toshiba driver and there is no drivers Toshiba for W2k on the Qosmio F20. Where did you get the drivers of control?
You need a driver for Toshiba in particular to use the commands. But there is no driver for W2k. In this case, the controls cannot function properly. -
Qosmio F20-155: get the layers window attributes error message
In a Qosmio F20-155 computer, I get an error:
The procedure entry point GetLayeredWindowAttributes is not found in the USER32.dll dynamic link libraryHello
According to you another detachment I assume that you have installed a Windows 2000 operating system on your laptop. Am I wrong?
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12617Well, I have studied a little bit and found information that maybe this Microsoft Update can fix this problem:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=01358EAC-F1C5-4CB7-BE3D-64459F4AD3FD&displaylang=enHowever, the Qosmio is not delivered with the W2k and there is also no Toshiba driver for this device.
-
New installation of Windows XP Home edition on Qosmio F20 - sound card errors
Hello
I am one of those who is very reckless on internet and download a lot of spam and viruses along the way. I keep, but I'm also obsessive compulsive on the backup of my important files, so when my computer flip out on me, I just wipe it clean and continue!
I stick to windows XP because some software I use still does not work on Vista, and I also install a completely new copy of XP instead of recovery as bundles of Toshiba with my laptop. Why? Because I lost it...
Anyway, I've been tracking the drivers to get the last bits of the material work and all seem to work well! The only problem I have is with the (Yes, you guessed it!) sound card driver!
I have a Qosmio F20 and have no idea of what sound card is actually inside this thing, I have always used SoundMAX Integrated Digital Audio drivers and they do most of the work very well, but they seem to have problems when I try to use Adobe Premiere Pro CS3 and Soundbooth. Both programs complain that there is no sound card and then refuse to open,
As far as I know, the driver that I use is by 'Analog Devices' and v5.12.1.5240. I don't know if it's really any help at all!
Does anyone know which driver is correct to use and where to find it, or is the fault, I have just an inevitable?
Thanks in advance for any help!
Pav
Hello Pav
Have you installed Windows XP Home with Service Pack 2 included?
On the Toshiba download page, there is a driver available and I do not understand why you think that this is not the right one. The same driver will be installed if you use recovery CD/DVDs.
-
Error code 37 on Win XP MCE - no drive on Qosmio F20
Hello
The DVD drive on my laptop Qosmio F20 is suddenly not recognized by windows.
Throw the 37 code can initialize the driver. Have removed and reinstalled the DVD and drivers, but failed. Don't think I did anything that could have brought this on. Can someone help please...Concerning
Mark
Hello!
Sometimes it s useful to search in the Microsoft Knowledge Base.
I think that this article can help you to:
http://support.Microsoft.com/kb/314060Good bye
-
Hot for the config of the Bios in my Qosmio F20-103
Hello
I have a Qosmio F20-103, windows xp has been installed on this subject, I need to install a new windows xp because I got the virus. I went into bios set up Boot Device Priority ad: CD-Rom-Lan-disk floppy hard-drive and I can't start my cd rom hollow something happens.
So I went in the old and infected the system (xp operating system) device introduced my Xp Cd in the CD-ROM and show me the windows with a few options, so I pressed on install Windows XP now and begin to deal with some files and restar the laptop... when it turns turns out the laptop Boot and read my Windows Xp CD.
So why this time did he? OK so I went in the press of Enter - F8 installacion program (accepts the terms of the contract) press on enter new install. but before that I had to remove the particion with XP infected previously ok I deleted everything and stars adaptation of the file... copied the 100% of the files requiered.
Setup restar the computer and the load of a new system of xp we guess his will install the operating system (Xp) but the pop up an error message, new and clean so "insert the windows xp service pack 2 cd in the cd rom a pres enter" I said what! = S was the xp cd in the CD-ROM. I agreed bottom stamped and said. installers must 'asm' search for files for the directory to continue facilities plesea.
Tried to search for this file, but it seems like there was no Xp Cd in the CD-ROM then I restar the laptop... this laptop will not start CD ROM more. The bios options has not changed.
Now, I can not install windows, I don't know what to do. And I really need to install windows, but can't find a way to make the laptop starting by cd rom.
I tried to re config the bios setting but nothing happened.
You guys can give me some ideas what to do please?
will be thanksfull with you.
Sorry for my bad English.
Hi mate
The history of sounds strange for me
First of all, it would be interesting to know if your CD/DVD drive is able to start using another disc; for example, a disk of Linux or a self created WinPE disc.
(What is WinPE-> http://apcmag.com/windows_pe_20_a_tiny_version_of_windows_for_system _maintenance.htm)This would use to determine if the CD/DVD would start from all drives another.
You can also try to boot from the Win XP disc by pressing the F12 key immediately after that the laptop is turned on.
Now you should be able to choose ODD as a source of start-up, it will allow a start menu.Another idea. Maybe the CD/DVD drive cannot start until this special disc
In this case, it would be advisable to copy the Win XP on another CD or DVD disc.
After that, you can try to boot from the new drive copied.Of course the Win XP must contain the SP2!
Last but not least don't forget to include the RAID drivers because the F20 supports RAID!
-
Qosmio F20-154: BSOD and turns off
Qosmio F20-154 goes to blue screen and turns off if the cd is inserted or if the flash drive is inserted
Also hotkey error on turn on the computerHello
This means that you can not read data CD or USB key?
Is this correct?Have you tried to boot from the CD or DVD?
Have you tried to reinstall the OS? -
Qosmio F20 won't start - power light flashes orange
My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.
I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.
I am really puzzled.
If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.They have manuals containing instructions and the exact description of the code how do I solve this problem.
Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter. -
Main problems after upgrading from XP to Vista on Qosmio F20
I have recently upgraded from XP to Vista on my Qosmio F20 and having problems. It seems that I lost the ability to change screen resolutions, to adjust the volume, brightness, etc. Basically, I lost the laptop functions. I also tried updating the BIOS but get the following error message "BiOS update only is not supported OS - unsupported OS or service pack installed.ยป
This also makes very slow computer.
You now have a few questions, or you wrote just a report on your experience of Vista on Qosmio F20?
The fact is that Toshiba does not support Vista on this laptop model and thereby you will ever complete Vista of operation (including the Toshiba tools and utilities). For supported laptops, Toshiba offered special Vista supporting BIOS but for your laptop, this update of the BIOS does not exist.
Sorry! :(
-
Qosmio F20-153 - ntoskrnl.exe file missing
Hello
I have an almost 5 year old toshiba Qosmio F20-153, which has developed an error with the Windows message root>\system32\ntoskrnl.exe file is missing.
I wonder if it's fixable without completely re - install the complete operating system that I still have the Toshiba restore disk.Any help much appreciated.
Hey Buddy,
In my view, your only option is recovering the entire notebook. The Toshiba Recovery disk only contains an image of factory settings, which means that you can t install this single file of this disc.
In addition it s a good idea to reinstall Windows from time to time. If your installation is already 5 years old, you should do this. You will be surprised with the speed of your laptop is after that. :)Use the recovery disk is quite simple: you must boot from that disk and follow the instructions on the screen. You do a few clicks only and that s it!
-
Qosmio F20-149: I accidently deleted the folder Power Saver
Hello
I have problems with the energy saver, but I could not uninstall and reinstall so I deleted the whole directory... an error! So can someone download me its Repertory Powersaver so I uninstall etc still files once and I can uninstall correctly it!
I have a Qosmio F20-149, but with luck another Qosmio Version will do as well, too!
thx for the help
I don't think it's a good idea to install files to watch foreign power on your operating system.
I recommend you to download the energy saver (if you have it t n), and then install it again.
If the installation does not start because of missing files, so you must first enter in the registry, and then delete all entries of power gain.
And repeat the installation procedure. -
Re: No sound after my first format... Qosmio F20
Hello
I have just formatted my Qosmio F20 after 2 years of use. BUT! Unfortunately, I'm so disappointed because I used the "Product recovery" CD in order to have a secure and easy format, but the results were bad! There is no sound coming out of my speakers.
I have the logo "speaker" on the bottom right of my screen and I can raise and lower the volume but I still don't hear anything.
Also, I can play videos and songs and the "players" do not give me error messages regarding my sound sessions.
If everything seems Ok, but I don't know why I still can't hear you! I'm deaf? loooool
Furthermore, I have no problem with the built-in speakers say at the time I used the "product recovery CD.
Please let me know what I need to do! : S
Thanks for your time,
JeffreyIts always best to use the recovery CD when you reinstall Windows, it will have all the drivers and patches the system must :)
Try clicking on Mute, then it activate several times. Mute may get "stuck" in "secret" mode after reinstalling Windows.
Check also that the physical volume knob is completely assembled. -
Tuner not found on the Qosmio F20-149
Hello world
I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?
thanking you in anticipation.
Best wishes.Hello
I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.
If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?
Maybe you are looking for
-
Importing photos is no longer imports of Canon EOS 20 d
Since the update to IOS 10/Sierra, the Photos is not automatically import photos from my camera. Previously, I would like to connect the camera to the USB port, open iPhotos and he would start the import process. I've rechecked through Capture of Ima
-
Portege M400 boots only when the base
For the last two months, I have starting problems with my M400. When it is not attached to the docking station it starts as soon as a person out of 30 (or more) times. The rest of the time that it is either the power led flashing orange or simply the
-
Satellite L350 - BSOD during the recovery and missing "BOOTMGR"
HelloI have a Satellite L350, Vista Home premium SP1, (had it for about 4months) Yesterday I received an error black screen on my laptop it says to reboot, so I did, then just, my laptop wouldn't stat more, I have no idea why? So I put in my computer
-
Satellite L500-154 - how to get the software packaged for Win7
How can I get the software "Bundled" for Win 7, I will install Win 7 full (no updates), in the moment is runing Vista on the laptop
-
How to dynamically set the containers/component
Hello I want to put on if containers of other condition.i.e condition if - set another container2 container1. How can I do? Any reference?