Rotation Rotation > arbitrary does not sometimes

Similar Questions

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Tecra M7: ESC/Rotation button does not work

  There is "ESC" key on the screen of the control panel (lower left corner). The other function of the button is to turn the screen if you hold for more than 1 sec (depending on the image and the manual).

  This should be handy in tablet mode. Unfortunately, the rotation function does not work for me. The button itself works because flight' does what it says. I don't mean to redefine 'escape' to 'spin', but there is not even this option.

  Someone has / had similar problem?

  Hello

  This ESC/Rotation button works in the same way as the ESC key when struck or changes the orientation of the screen when pressed for more then second. That s right!

  Have you read the additional information in the user manual? I found some nice info in succession the orientation of the screen section.
  You can change the orientation of the screen on three different ways and one in this way is the use of the key ESC/Rotation!

  When Toshiba Rotation utility and Toshiba accelerometer utilities are run, the changes in the orientation of the top and bottom of the screen is automatically recognized by pressing ESC/Rotation for more than a second.

  So remember that the two utilities are run correctly!

  Best regards

• Portege M400 - screen rotation utility does not

  A week ago, I turned the screen to put in tablet mode and noticed that the screen does not rotate 90 degrees automatically as it normally does.

  I then pressed the button of the screen rotation so that it would automatically adjust to the direction that the laptop was in. This had no effect.

  I was able to rotate the screen manually by going to the graphic properties and you can set up hotkeys to rotate manually onscreen, but is no longer automatically adjusts. I ran the utility of toshiba manually rotation, but it doesn't have an effect either.

  Does anyone have any suggestions?

  Hello kjames

  Try again with the official page of Toshiba support under http://eu.computers.toshiba-europe.com > support & downloads. It's the Rotation Utility for Windows XP Edition Tablet version 4.00.00.06.

• Lenovo A2109 auto-rotation feature does not

  When I go to my auto rotation feature setting is dimmed and does not allow me to rotate the screen. Is there a way to fix this?

  Try to flip the switch black bit on the left side above the volume knob.

• Screen rotation backwards does not work

  My z2 xperia phone does not turn on the screen when held upside down in position. In other words, it does not turn the screen 180 degrees from the normal position. 90 degrees each rotation is correct. This happens in safe mode as well.
  Is this a bug or a feature? Is there a cure?
  Thank you
  Amit

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  The display can not be rotated 180 degrees, it can only rotate 90 degrees on each side.

• My rotation tool does not work? (FreeHand MX, Mac OS 10.6.3)

  Hi all

  Recently, I loaded FreeHand MX on a Macbook Pro.  It seems to work pretty good, except that I can't get the "rotation" tool to select. I added this tool to the default toolbar (using ' tools/customize bar' but when I try the select, the cursor returns almost immediately to an arrow or magnifying glass (whatever earlier).) So to rotate objects I had to activate/view transform handles, or use the transformation dialog box and type in my values. The first solution works pretty well, but I would really like the tool rotation basis to work!

  I read last month in the forum of people have problems with FH and OS 10.6.2. someone said 10.6.3 solved their problem, so I upgraded to 10.6.3 before FH MX is loaded. But I wonder if it is a 10.6.3 compatibility issue, or if there is something I can do for menus, preferences or restart, which would make this work tool. I need a solution that does not reload the software of my disks on the fly.

  If you can help solve this problem, much appreciated! Then, I would have just my usual get-used-to-MX learning curve (I normally work 10 Freehand on an old G5 and Mac OS 10.4.11).

  Thank you!

  Ben Pease

  Make sure that you have added the button of "Rotation" of the tools/commands group.

  There is another icon "run...". "in her edit > Group of transformations. This button opens the transformation for the rotation options panel.

  Judy Arndt

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite U305-S7432 freezes and does not sometimes using Win XP

  Hello.

  I have a portable Satellite U305-S7432.
  Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

  My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

  Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

  If it goes into sleep mode, reboot takes place as planned.

  I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

  Any ideas?

  It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

  Good luck

• Page rotation script does not (not allowed error security settings prevent access to this property)

  Hello

  I use a script to rotate each pages in pdf format by clicking on a button. I added a script to rotate the file in the click event of the button turn as a javascript. It works in acrobat, but not in adobe reader. Please see the script

  Start = 0;

  nEnd = this.numPages - 1;

  nRotate = 90;
  Try
  {
  If (this.numPages > 0)
  {
  this.setPageRotations (start, nEnd, nRotate)
  }
  }
  catch (e)
  {
  App.Alert ("processing error:" + e)
  }

  But I get this error in adobe reader not in acrobat. "not authorized error security settings prevent access to this property or method". What is the problem. Please someone tell me.

  OK, so here's what you do:

  -Create a new file in a plain-text editor (I recommend Notepad ++) and paste this code:

  safeExecMenuItem = {app.trustPropagatorFunction (function (code)}

  app.beginPriv ();

  app.execMenuItem (code);

  app.endPriv ();

  });

  mySafeExecMenuItem = {app.trustedFunction (function (code)}

  app.beginPriv ();

  safeExecMenuItem (code);

  app.endPriv ();

  });

  Close the player if it was open and then save this file as "MyScripts.js" and place it in the following directory (this is for Windows):

  C:\Program Files (x 86) \Adobe\Reader 11.0\Reader\Javascripts

  If you want it to run as well in format Acrobat place the file also less:

  C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Javascripts

  Now to rotate the page clockwise attach this code to your button (in Acrobat, of course):

  mySafeExecMenuItem ("RotateCW");

  And to turn them counterclockwise, use this code:

  mySafeExecMenuItem ("RotateCCW");

  Open your file in the player and the buttons should turn pages when you click on it...

• Why my computer does not sometimes, sometimes it's done (to connect)

  Hi all - when I turn on my computer it get in the log on screen most of the time, but other times, when he's there, the red light blinks just desktop case on. Apparently not "launch" correctly. I have connected a printer and speakers. When I move the log on screen and to get to the program of the icons start programs remain a Virgin and an hourglass appears in the taskbar when I move my mouse over it.

  Can anyone help please?

  Hello gazHolmwood,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• HP 8 1401-Auto screen rotation does not work

  Automatic rotation of the screen does not work, even if the automatic screen rotation is turned on in settings

  Auto-rotation of the screen to switch off / on has not helped.

  I am currently using a utility (app) to force the rotation of the screen. It works, but it is not the solution.

  Any suggestions? Thank you.

  Android version 4.2.2

  Build 1.0.7_WW - FIR - 13.20140211

  SpikeyDutchman wrote:

  After that the auto reset to factory-rotation still does not work.

  Any thin that otherwise I can try?

  Contact HP.

  WyreNut

• Vertical ComboBox does not show the label of the selected element of the sound

  Hello

  We created a custom vertical ComboBox.

  Normal ComboBox underwent a rotation of-90 degrees.

  It aims to show the label selected and open the menu to clean x, the coordinate y.

  To open the menu to the right x, y, we have replaced 'downArrowButton_buttonDownHandler' function to move the drop-down list accordingly.

  However, the selected label is not visible on the screen. Rotated text does not appear without embedding fonts. So we tried to embed fonts for the same. It work well.

  Help, please.

  Kind regards

  TANU

  I think you should try integrating "BOLD" to the police version, or

  set the combobox control to display its label in normal fontWeight

• My dvd/cd rom drive does not open

  I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

  Hello

  Try using a tip of a paper clip to open the tray.

  "How to create a trombone in car opener.

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  "CD-ROM, DVD or other drawer not open."

  http://www.computerhope.com/issues/ch000214.htm

  See you soon.

• Control Panel: programs: does not

  I open the Control Panel, then click on programs. "" A message appears that says program does not / sometimes windows will try to determine and after 3 or 4 times or when I try to get out it "brightened. Most once not. It is therefore impossible for me to uninstall them, or even to watch the programs that are installed. Any help would be greatly appreciated and I'm new to this. Thank you!

  Hello

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =============================

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  =============================

  If necessary:

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others.
  Click on each of them at a time and see if we don't start – if so right-click on it and rename it
  using cpZ as the extension is is to find. Try Control Panel - if no joy persevering of all your
  .cpl files. (Note that other people find other subfolders under C:\Windows not should be judged as they)
  are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.