Why my computer does not sometimes, sometimes it's done (to connect)

Similar Questions

• Why my computer does not recognize my iPod when it is connected?

  Whenever I plug my iPod into my computer, the trust option is not pop up, so it doesn't appear on my iTunes, all that says is, ' do you want to allow this computer to access your photos? I plugged my iPod on other computers and it works fine. I plugged into other devices on my computer and it works fine. In addition, my iPod would freeze at random just for no reason, and I don't know why. The time is all messed up as well, which means it switches at random times and time stops working if I turn of. It started a week ago and it's really annoying. Can someone please?

  I also have this problem, iPod touch 5th generation iOS 9.2, but I'm under 10 64 bit Windows, I tried to uninstall and install itunes remove all plugins and services and there are no other programs interfering with itunes so don't know what to do, also tried to reset the ipod to factory settings as well. My computer recognizes it as an external storage device though if this is helpful at all.

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• Why my computer does not recognize the CD when inserted?

  I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• My computer does not recognize that I have two monitors connected.

  I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.

  Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.

• Why my computer does not freeze when I go on a website or you connect to the internet.

  Why the pc freezes up when I go to do something and he'll say to kill program or waiting when I wait it never returns

  original title: PC does not connect to internet

  Hello

  1 during how long have you had the problem?
  2. don't you make changes to your computer before the problem?
  3. what operating system is installed on your computer?

  Assuming you have Windows 7, I would suggest you follow these steps and check if the problem persists.

  Step 1:

  Test in safe mode with networkproblem.

  Step 2:

  If the problem does not occur in safe mode with networking, I suspect the involvement of a third-party software, suggests therefore you can start your computer in a clean boot State, and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

• Why my computer does not freeze if online or offline?

  I can play solitaire and it will freeze in the middle of the game. I'll be in my email address and it will freeze. I can be offline and going through my photos and it will freeze up.i can be watching a tube in u online and it will freeze. Using anything in my my computer on or off line it freezes and I have to pull the plug and start again. I HAV scanned with my anti virus and windows defender and nothing does not.

  Several reasons-

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  Other things mentioned that can be useful to consider in these related threads:

  Why my computer becomes so slow all of a sudden?

  Why my computer crashes and I always have to restart?

• Why my computer does not freeze when the screen saver is running

  My computer very well as long as the screen saver does not illuminate. When the screen saver comes on it crashes. I am running Windows 7. Help, please

  Perform the clean boot, and then check. For more information, see the following link:

  https://support.Microsoft.com/en-us/KB/929135

  If the problem persists, please scan SFC and then check. Check the link for more information:

  https://support.Microsoft.com/en-us/KB/929833

  If the problem persists, you will need to reinstall graphics card drivers:
  Uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• What should I do if my computer does not recognize that there is a device connected media player?

  I have a toshiba laptop and everytime I try to plug in my iPod to download music, Media Player does not recognize that the device is there, to that effect, I can't sync the music on my iPod.

  Hello

  Thanks for posting your question in the Microsoft Community.

  Is it recognized in Windows Explorer?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter to check if it detects anything:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• Why my computer does not read my SD card?

  I have an acer x 3810 with vista. I inserted my SD card into the reader and it did not read. When I looked at the drivers installed, it appeared to save even not that I have a SD card.  What should I do?

  Hello

  Check their documentation online with Support from Acer, pilots and diagnostcs.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -----------------------------------------------------

  If you can not get the card reader to work, it can be replaced or an external card reader is not
  Dear.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

  -----------------------------------------------------------------------------------------------------------------------

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
  the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why my computer does not connect to my printer (HP Photosmart 7520) wireless?

  Since obtaining the printer, my laptop has always been able to send documents to the printer with absolutely no problem. As far as I know, it works because the printer is connected to the same network as my computer wireless.

  However, none of my colleagues are able to print, in spite of being connected to the same network.

  Is there something to do? Much of the time, the printer is not even appear on their drop down box (when trying to print in microsoft word for example), but he always does on mine, and we are all on the same wireless network.

  Any ideas?

  For issues with Mac that I suggest you post in the forum Mac printing and scanning here.  Do not forget to mention the model of the printer, and also which version of Mac OS X, users have.

  For Max OS 10.6 to 10.9 drivers are available on the site of HP here.

• Why my computer does not recognize Spyder2 monitor color device?

  I just loaded the software for monitoring of color SPyder2.  The software icon on my desktop, but when I try to run an analysis of the color, I get an error saying that it cannot recognize/find the Spyer2 device.

  Hello

  1. the unit recognizes in Device Manager?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Run the fix it and then check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Why my computer does not have Windows Media Center after upgrade from Windows 7 Starter to Home Premium?

  My computer was pre installed with Windows 7 Starter and I bought a key to upgrade to Home Premium Edition at Wal Mart. I have already validated so its authentic. I also went on START<>

  PLEASE HELP ME!

  Access control Panel\Programs\Programs and features, and then select "Turn Windows features on or off" in the left column.

  Under media features, select Windows Media Center - and everything you want.