rotation tx2696 problem
I have a laptop of 2697 tx, recently upgraded to Windows 8 Pro. The upgrade of love. Now I can drag back with my finger. My problem is the following; my screen will turn, but win 8 does not turn it and does not adjust the screen to display the position of rotatged. It would be a driver problem. Thank you in advance.
Please try Windows 7 quick launch driver, which could help you get the job of autorotation:
http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46731.exe
Tags: Notebooks
Similar Questions
-
Portege M400 - utillity rotation screen problem
The screen rotation utility, or more exactly the tilt to TOSHIBA accelerometer utilities is incapable of running and comes up with an error unable to open registry, (I got the utility on the site of Toshiba American as they seem to be a little more ahead of the release of the software and updates for their laptops).
However, it seems that the problem is that the software does not work due to refuse access to the registry!
Any ideas on how to give the software the rights to access the registry or a version more work on the software, which works?Hi Oliver
I can only repeat my statements here in the laptop forum and (drivers & tools) software designed for the American market are the same as the substance of the Toshiba Europe!
I m not very surprised that the accelerometer TOSHIBA utility does not work correctly.
That's why I really recommend you to download the version on the Toshiba Europe site and reinstall this tool.I m 90% sure this will work like a dream ;)
-
Using the Rotate tool - problems
I'm a newbie, but I know how to do this, at least I thought I did. In short, I want to draw an ellipse, then use the Rotate tool to copy many of them, until I get a circle of them, using the lower part as the pivot point. So if I want 36 steps, I put the angle to 10 degrees and copy, then ctrl-d to paste as needed to complete the circle. The problem is, I can't get the pivot point for adapt to where I want to. When I initially click on the ellipse first (and only), then my rotation tool, I then passes the pivot toward the bottom of the ellipse. When I double click on the Rotate tool again to bring up the dialog box, the pivot point goes back to the Center. Once the dialog box is in place, I can't set the pivot point more. Furthermore, if I select the ellipse, select the Rotate tool, move the pivot point, then try ALT-click on the new point pivot, the newly copied and pasted ellipse will be elsewhere on the artboard.
What Miss me? Thanks for any help.
Well I just found out the problem. It's my Wacom driver. I took my USB mouse and it worked like a champ, picked up the pen or the Wacom mouse and you never know where it will copy. Thanks anyway. At least now I know.
-
rotate the problem of header in PCM as pdf text
Hi all
I have a problem with the header text turn in pdf format
IM using this css -webkit-transform: rotate(-90deg); code for the rotating header text. It works fine in the cfm page but does not not when converting it to PDF using the cfdocument tag
Please help solve this problem
Thanks in advance
Cherif
The
cfdocument
tag supports the following CSS styles:background
background-attachment
background color
background-image
background-position
background-repeat
border
border-bottom
border-bottom-color
border-bottom-style (solid border only)
border-bottom-width
color of the border
left border
border-left-color
border-left-style (solid border only)
border-left-width
border-right
border-right-color
border-right-style (solid border only)
border-right-width
border-spacing
border style (solid border only)
border-top
border-bottom-color
border-top-style (solid border only)
border-top-width
width of the border
bottom
Claire
Clip
Color
content (channels, counters only)
counter-increment
Counter reset
cursor
view
float
Police
font family
the font size
font style
font
height
left
letter-spacing
line height
list-style-type
the margin of
margin-bottom
left margin
right margin
top of the margin
outline
the outline color
outline-style (solid, dotted, dashes only)
Outline-width
padding
padding-bottom
padding-left
padding-right
padding-top
page-break-after
page-break-before
page-break-inside
position
right
text-align (left, right and Center)
text-decoration
text-indent
Back to top
Unicode-bidi
vertical-align
visibility
white space (normal, nowrap only)
Width
z index
cfdocument - ColdFusion, documentation in English - Adobe learning resources
Do not forget to prefixes (-webkit) on css related browsers as well. This applies to Internet Explorer.
-
Stream 7: rotation screen problems
After installing the drivers for the rotation of the screen but I work finally, the landscape is correct when you turn to me on the side, but when I turn the current 7 - portrait vertically is to show the opposite way round. upside down.
Some would like to help with this please if possible
With the hp support assistant help. NA not work several times then uninstalled screen pilots and worked.
-
TC4200 Screen Rotation / cursor problem
I installed Windows 7 Ultimate on my TC4200, and so far everything works great. The only problem I've had is with the Q Menu, which is already a known issue. Now, last week, I noticed two things happen: one, the screen is no longer automatic turns when I change the orientation. And two, when I flip the screen either by using the digitizer on the side of the screen or via display options, the cursor does not change orientation and behaves as the screen is always in the ordinary sense. I have re-installed the driver for Penabled from the Wacom site, as well as re - install the drivers of HP Support nothing helps. Did anyone else have this problem, or I'm just on something?
We have found a solution. We had to use an old version of the Wacom driver and it solved the problem.
You need to load this driver, it will solve the problem of cursor.
http://www.Wacom.com/downloads/driver-detail.php?id=184
After a reboot of our two tablets work correctly. Now I understand why my colleagues automatically changes orientation, and mine does not.
-
I am trying to get images to rotate every few seconds automatically. I inherited the site from someone else and I tried to copy the ss hype container and script generated hype ss that they wrote, but I can't make it work. I think it has to do with the numbers at the end... the ? 14801 just before the "> < / script >.
The code is pasted below. Can someone tell me where the ? 14801 comes? Ss_neuropsychology_Resources of referenced source file contains a file hype.js, a PIE.htc, a ssneuropsychology_hype_generated_script.js file file, as well as images that turn.
< div id = "ssneuropsychology_hype_container" style = "position: relative;" overflow: hidden; width: 360px; height: 240px; ">
< script type = "text/javascript" charset = "utf - 8" src = "ss_neuropsychology_Resources/ssneuropsychology_hype_generated_script.js? 84392" > < / scr ipt >
< / div >
This link shows what I'm trying to accomplish (photos automatically change every two seconds): Carter Center of Psychology – Neuropsychology
I just want to do the exact same thing on the page of brief Care Clinic (right now I have it pointing to photos of Neuropsych page, but they want me to have different photos for each).
Any help is appreciated!
Thank you
You can use the Bootstrap Carousel Slider or jQuery Cycle2 or others mentioned in this related discussion from a few days ago.
Creating an Image reactive Slider in Dreamweaver
Nancy O.
-
When I paint, I rotate my canvas in order to get the best shot. For some reason any when I turn with the other pictures it turns all the images in any way I can fix this?
Uncheck the box do rotate all windows and see if that helps.
MTSTUNER
-
Color Laserjet M551 turns landscape CW, want to CCW
When you print documents with landscape and portrait pages, I want the pages in landscape turned CCW in order to align the top of these pages (on the side of the header) with the left side of the pages portrait.
Same document printed from the same computer on LaserJet 3600n works I intend.
Who are you looking to for if all parameters can solve this problem. The organizations to which I submit documents mandate this approach.
Win 7 Pro, MS Word 2007
After much frustration with this and no help from HP I tried a last apparently silly approach to solve the problem - I installed the upd pcl5 - x 64 driver. Guess what? The old driver works on the new printer and resolves the incorrect rotation printing problem. Go figure.
The lesson is that the latest software is always better than older software.
-
Friends, seem to have problems with the hp (camera and printers) product... C4680 did not work properly... turn on and off at random, will not print, etc...) software so uninstalled and downloaded new set of basic software... Download no problem (from the hp site), extracting exe. file corrupt... corrupt file directly from the hp site? don't know what to do other than buy new non hp printer... any suggestions would be appreciated... thank you for your time and your thoughts...
Hello, random rotation power problem is caused by a power supply problem.
Time for the new printer.
-
How to crop a video in first Pro CC 2015
OK, so I finally get the hang of the rotation, only problem is when I rotate the file takes the form of the previous mould. In other words, if the video was on the side and I Flip horizontally, there's a black cast of previous management on the side. Is it all the same to "reframe" the black out?
This is the info that I needed. As I suspected, this is the problem. Under the video section says '1080 x 1920' - it's the size of the frame of your video clip, measured in pixels. The size of the image is always measured horizontally, then vertically. In other words, it shows that your film is higher than wide - 1080 pixels wide, 1920 pixels maximum. The good news: 1080 and 1920 are standard sizes; the bad news: they're back.
The solution: create a sequence that we know is correct, and then add the images in this sequence (no required reinterpretation) and rotate. What happens when you drag an element from the project in the timeline panel, is that first creates a new sequence that is made to this clip on measure. It's great when everything is spec. However, in this case it works against you because the video is not spec. So, we have to use what you did before but tweak it.
1. click on your calendar for the active panel
2. choose "sequence > sequence... settings. »
In the new dialog box, you will see something similar to this:
The edit mode and the time base will be probably different, but look at the area that I've highlighted in red.
3. change the size of the image in 1920 horizontal and vertical of 1080.
4. click on 'Ok '.You'll probably notice that video now looks wrong once again, even if the black bands are now on the left and the right. Just a few things more should solve the problem.
5. Select the item in the timeline
6. choose "window > effect Options" (unless this Panel is already open, in which case just start using it)
7. change your rotation value until the video is correct - usually it's either 0, 90, 180 or 270.
Hope this helps. If this isn't the case, please let me know.
-
Why muse 2015 has added black pixels to my images when uploading
Hello
It seems has the update in the Muse 2015 more if it is not all the footage, transferred to the FTP host get black pixels, added at the end? The photos now affected are the same pictures used and downloaded with the previous version of muse without problem.
The real. JPG on my drive is fine and look good in the design pane & preview Muse 20015. After uploading to a FTP host black areas appear effectively. Here is a link to a page hit.
Notice the diagonal thin black line below that the bristles of the brush. This line is not on the original file placed in muse.
Thank you
TommyCiv
If you change the harvest by using the crop tool to make the image of the image a bit smaller, the problem goes away?
If the image is not rotated, the problem goes away?
-
Using Firefox 27.0, when I click on a link, a rotating cursor appears and continues to run. Move the cursor will solve the problem. I had this problem for several versions of Firefox, and I use automatic updates.
Please update Firefox, troubleshoot Add - ons and if this does not help, then do a clean reinstall.
Thank you!
-
Problem with rotation (Win 10)
For some reason, my Yoga 2 Pro refuses to return to "normal" rotation (backwards or on the side). I tried to disable ymg services (no effect), I tried with the ctrl-alt key combination (each one works perfectly, except for the combo of ctrl-alt-UP). - but nothing makes it go back to normal mode. Does anyone have an idea on how to fix this? Thank you.
Just realize. It was a problem with a driver (HID Collection V2 sensor that (for some reason any) was is no longer 'enabled'.) I noticed in Device Manager and as soon as I clicked on it, the system also showed a "Sdo sensor V2" and from that moment, the screen switched to normal mode (landscape, NOT upside down). So problem solved. I hope.
-
Problem - edges of digital triggering slows down during the fast rotations
Hi all. I have problem to understand. I want to measure the pressure with two strain gages on 90 degrees (NI 9237 half bridge II) and I engine with metal plate on it with 52 teeth (gear) to measure on each tooth of the strain. For the rotation, I use NI 9401 digital input.
I need for example 1000 samples from the first digital edge to the second. (on the metal plate). I try to start trigger. In slow speed (turn around with the hand) of the metal plate, everything is OK. But if I turn around the metal plate digital fast triggers edges slows down. During a cycle on the metal plate on the cost of slow speed me 52 digital edges 1000 sampels by edge (metal plate is with 52 teeth), but rely on fast speed on me 25 edges. This problem is sync of the digital inputs and the analog inputs. I made the example with DAqmx Vi express. I've implemented on digital imput and then count me in each tooth regardless of speed and everything is OK, but when I buid trigger of strain on the edges of quick release rotation speed slows down.
Can someone help me with this?
Thanks before.
So you're collecting samples from 1000 to 10000 samples per second. Which takes 100 Ms. If your triggering edges occur more quickly than the interval of 100 ms, some of them will be missed. If you run faster than a cycle all 5.2 seconds your gear plate with 52 teeth, some triggers will be produced before the end of the previous data collection.
What is the fastest speed that you will not sping palte metal?
Lynn
Maybe you are looking for
-
Satellite L350 - strange screen problem (contrast is gone)
Has anyone met on Toshiba Satellite L350 - 14f (PSLD0E-00v01men) a display problem where looks contrast went? Is this a common fault so that it works well on screen/TFT external? I checked gamma, even started in safe mode and used a standard VGA driv
-
I have a mac Pro 13 "model and its making funny nose and get hot around 11:00 area when she is facing you. sounds like wearing out but it happens only intermittently.
-
How to send frames to header + 1 byte of data in network LIN?
Hello I use USB-8476 to communicate to a slave in a LIN network. Can someone tell me how I can send a header file more 1 byte of data to the slave in a LIN network. I need to send a sync + id 00 X 34 break, followed by a byte of data. I don't know ho
-
Compressed files into Windows Media files & does not of course
All of a sudden my e-books and digital scrapbooking files, which have been compressed, transformed into a different type of file - unfortunately I don't know what, and I couldn't open them! I don't know how they got that way. I must have done somet
-
I forgot windows login password has no reset usbdisc