Router disconnects Internet duringWindows download

Similar Questions

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• SE connect/disconnect Internet using a command prompt

  original title: to connect/disconnect Internet

  Is it possible to disconnect & reconnect my internet connection of cable to a command line in Windows XP?

  Hey John,

  I don't know if there is a way to disable the internet connection to the modem or the router by command-line in windows. There is probably a way to disable the network adapter on the local computer through command line, but myself I do not know what commands to use.
  I know, however, that if you drop your IP address, your connection will be terminated. You can do it in the command line by using the command "ipconfig/release" without the quotes. This will minimize your IP address causing your connection down.
  You can bring it to the top by renewing your IP address. This can be done in the command line by using the command "ipconfig / renew" again without the quotes.
  Note * I believe that you must be a system administrator to run these commands.
  Now, I'm sure that's not the best way to do it, but it will certainly do the job.
  I hope this helps.

• Printer continually disconnects Internet

  HP Photosmart 6520 guard disconnect internet, which makes it useless and driving me crazy! It will only connect if I turn it off, then disconnects after a short period. I followed the advice on the forums to support without success. My router has been checked and is fine. I put a static IP as advised. Please can you help.

  Hi Sabretooth and PhilRi. Four weeks and everything was fine. Think he knew I was going to accept as a solution when he decided to drop again! Verified hub and he had changed the SSID for 5 Ghz. must have had an update. I decided just to disable 5 GHz as it is useless for current devices. 2 weeks and all beautiful. Have noticed that since I disabled 5 GHz devices are much faster! Better all round. Thanks again for all the support.

• Microsoft Solitaire - message: "we have some problems to connect to Internet to download Microsoft Solitaire Collection data...» »

  For the last 2 days, when I opened my Microsoft Solitaire Collection, the program opens and I'll click on one of the 5 games and as soon as the second 15 announcement is complete, a message appears that says: "we have some problems to connect to Internet to download Microsoft Solitaire Collection data...» ».  What this mean and is there a way I can fix it?

  I uninstalled the MS Solitaire Collection, then reinstalled from the store. Connected on the first try. The app itself is the problem.

• Desktop Windows 7 disconnects Internet after going sleep

  Need help. My office disconnects internet connection on another every second or third time base when he falls asleep. Sometimes I can reconnect suite Microsoft connect steps, other no times, no luck. When the icon on the bottom toolbar to connect is blue, I can reconnect. When it is yellow I have to restart the computer to connect again. Sometimes, the error message will indicate that Local network connection cannot be found. Any suggestions? Thanks a lot for your help.

  Hey Herbert,

  From the description of the problem, I can understand that your computer disconnects from internet when it goes into sleep mode.

  1. Do you use the wired computer / wireless?
  2. Have made recent changes to your computer?

  Your network card is currently put to sleep in sleep mode.

  I suggest you follow the steps below to disable network adapter power management feature and check if it helps to solve the problem.

  1. Click Start
  2. Right click on computer
  3. Click on manage the
  4. Click Device Manager in the left pane of the window
  5. Expand the network card.
  6. Now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.
  7. Go to the power management tab.
  8. Make sure all boxes are unchecked and click OK and restart your computer.

  You can also check the items below, and check if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-GB/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  For more clarification to us, we will be happy to help you.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• Speed of the Internet to download applications

  When I go to the store to buy apps a message saying that my speed to slow. What Internet speed is needed to download apps?

  Hi Dennis,

  What type of Internet connection do you use?

  What is the current speed of Internet for download?

  Different applications require a different amount of bandwidth Internet for download. However, you can run the network troubleshooter and check if that helps to acknowledge the problem.

  a. swipe show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, tap network troubleshooting in the optionSearch .

  d. click utility troubleshooting network to run the troubleshooter.

  It will be useful.

• Static IP address on the server 2008R2 disconnecting Internet

  Please help with a static IP configuration on VMware.

  I would like to configure Active Directory on VMware with FULL INTERNET AND IP ADDRESS, please help.

  Scenarios

  I use VMware on Windows 8.1 10 and that's what strikes me:

  1. After installing server 2008R2 on VMware and the activation of the "Connection NAT" network card, I had full access to the internet.
  2. 1920168.5.2 to server static IP address assignment disconnect internet.
  3. Add more network on the server to reconnect to the internet but removes the static IP address.
  4. Even the bridge two network cards, I still get internet access.
  5. Active directory cannot be installed on a dynamic IP address
  6. I connect using wireless (my cell phone as a modem).

  Your help will be greatly appreciated

  After following your instructions, I discovered that VM DNS is 192.168.111.2. Both the DNS and gateway uses the same IP address, DNS is indeed the gateway to NAT. la... 111... changes when you reset the VM machine. Also, I discovered that the DHCP of the VM is 192.168.111.128 as you put it. Now place the Client Server on the same network of VM IP, thus, take the given dynamic IP 192.168.111.128/129/130/131 etc, make it static. Assigning 192.168.111.2 as gateway and DNS, provides access to the internet. However, after configuring Active directory member servers will not find the domain controller uses the DNS of VM.  Instead, insert the IP of the VM DNS as secondary preferred over the IP of the DNS server (for example, DC1, DC2 mem1 etc.) in the preferred DNS. Then... VOALA... Is set with full internet access.

  It was a challenge to the calm, but I give you the thumbs up for your lead. You are the best.

• My sony xperia l disconnect internet automatically while using with hot spot

  I m using sony xperia l c2104 I m using 3g connection to connect to the internet every time, I m using my phone as a hotspot and try to access some heavy websites like site, my automatically disconnected internet yahoo Web site and will not work until I restart my hotspot if someone can help me with this problem.

  Sony laptop has a distinct community which can be found here.

• WRT54GS Wireless Router recently started disconnecting Internet connection after 9 months

  Hello, I have read some and see that it is a problem common but of are to be decided.

  I have a Lynksys WRT54GS with the latest Firmware update v7.2 27 July 2009 (FW_WRT54GSv7.2_7.2.07.013_EN_20090727)

  I ran 2 desktop computers as well as my DVR security by the security cameras for remote monitoring, also portable hook upward wireless sometimes as well without any problem using this router for over 9 months now with no problems until the last few days... I never log out and leave it on 24/7 for 9 months without problem and now recently I had to pull on the power cord from the back of the router and reconnect it to re power on the router to establish an internet connection.

  Now the last 3 days the router loses its internet connection each monutes a few... hours... the time it disconnects are random moments and I have the programs I need to run all day but can't because the router loses its connections...

  I applied the firmware again... re factory - configure the router... rebooted the computer... tried cloning the MAC address... all seem to be doing nothing... the same problem still exists.

  All of the minutes or hours so it disconnects the interent.

  I ran the office computer directly to the DSL Modem and I'm online very well with a desktop computer without disconnections for hours and hours (18hrs to date is not a problem), so I know this isn't the access provider. I had this problem I believe before with a previous Lynksys router and then bought it and now after this short period it seems to do the same thing again with this one. What a pain in the but.

  All solutions and more...

  Re application firmware... then

  factory re set the router... then

  re - connect computers as if it were a new router... the MAC address cloning? Geezus... it must be one simple solution other then buy another brand router.

  Thanks in advance...

  What is the IP address, find the modem directly...? Connect the computer directly to the modem and check the ip address? What is the ip address, you get the router...?

  Try the following settings on the router and check the connection...

  -Change the channel to 11-2 wireless, 462 GHz

  -Under the Advance wireless settings tab, change the tag at 50, Fragmentation threshold to 2304, interval RTS threshold to 2304

• Help? Laptop Dell 620 router wireless, Charter ISP, WRT54G2 disconnecting Internet

  I met a ton of messages on other sites with the same problem, but impossible to find a solution - can help anyone? I bought a Linksys G, set up using the CD. My wired Office Gets Internet very well, but my Dell laptop wireless find internet, says he has excellent connectivity and then... just abandon the connection. It times out on every 2-3 minutes. Says 'search network address', then connects again. Then he falls. Etc.

  My ISP is Charter, who "can't stop." I tried to reset the router, change the IP address, everything I can think of.

  Windows XP on both machines.

  Laptop is great internet at my sister's, is not the laptop or a wireless card.

  Any ideas?

  Thanks for the fix - in fact, I found a solution on another thread that worked - clone the address MAC and who did it, not more left falling Internet. I have no idea WHY it worked... lol... but I'm just happy, she did it!

  I've will upgrade the firmware too - I don't know who will save me hassle in the future.

  Thanks again for responding!

• Router E900 with Macintosh - download from Internet computers

  I just bought an E900/switch wireless router to replace an old Linksys. I've been on the phone for more than two hours with a Linksys tech support (I don't want to even go there), and they can't help me.

  I set up the router for the Mac (OSX 10.5.8). main I have a laptop G4 (OSX 10.5.8) and also a Dell PC with XP (which I almost never use).

  The Dell works just fine. But here's the problem with Macs. MOST of the sites will be open very well - very quickly. However, there are a handful of Web sites that take a long time to open or won't open at all. It comes to Google, Yahoo, Youtube, and Facebook.  I tried everything and nothing seems to work.

  The technical support people can not explain either. Why would more average websites open in mili-seconds and the very basic (Google, Youtube, etc.) take forever?

  Any suggestion would be appreciated.

  This could have something to do with IPv6 connectivity. Some sites Web now uses the IPv6 servers. With your network running on IPv4, it takes time to translate the data to the format that the Web and its content pages tend too very slow load. See the article below for instructions.

  How can I disable IPv6 on Mac OS X?

• Disconnects Internet: dv6tselect edition and DLINK DIR-615

  I have an edition select dv6t entertainment PC with the factory installed Intel Wireless-N card and a DLINK DIR 615 wireless router.  Everything works well until another one of our home computers (wired or wireless) is enabled.  This causes the HP laptop to disconnect from the Internet (sometimes the computer will indicate that it is connected, but the icon symbol suggests it is not connected.)  We have a Dell and a HP PC, a Dell laptop, two i-Pads and a mini i - Pad who get along fine with the internet.  It seems that HP may be the connection more low and is always the first to be disconnected.

  I am not particuarly tech savy, but if you have a good solution that I can print and take with the laptop to someone who is tech savy to repair or adjust, I would be very grateful.

  Tortus99

  Use Windows Device Manager, not a Bill. Unfortunately, I can't find a specific driver with the information you have provided in your last post. This way you will know exactly what that says Windows is installed. See the following example of my current Envy17-ready 3002ea book. Through the Device Manager, I see that this laptop has Intel Centrino Ultimate-N6300 AGN wireless card.

  

  Remember that if you know that there is an installed Intel device you can always go to the Intel Download Center and find the best driver for the device. It is only if the Download Center is in place. This is not always the case.

• Annex WAG160N has v2 ADSL2 + Wireless Modem Router disconnecting at random intervals

  The problem is that my WAG160N router v2 isolates at irregular intervals for no clear, obvious and clear reason. The router always reconnects to the Internet automatically, but we want to have stable internet connection so it does not interfere with our download and my game online. Sometimes, it will be disonnect once a day, two days, three days or more times a day.

  This problem occurred for about nine months and we have tried to solve this problem for four months without success and very little progress.

  There are nine devices connected to this router:

  Desktop Mac (connected by an Ethernet cable)

  MacBook Pro my mother (wireless)

  My mother of Windows (wireless) laptop

  My Iphone (wireless)

  My mom (wireless) iPhone

  Our Ipad (wireless)

  Our printer (wireless)

  My Xbox 360 (connected by an ethernet cable)

  My PS3 (connected by an ethernet cable)

  First of all, I contacted our ISP. They conducted tests on our phone line and there was no obvious abnormalities. They then made some adjustmenets to our connection, but none of the improvements to our stability of connection, either. I also did the isolation test which did not help. Then they came to the conclusion that this router is the source of the problem.

  Then I noticed that when my Internet was disconnected we had active DHCP and it kept more than one of our devices, assigning the same IP address. On my desk he showed me an IP address conflict message whenever we have disconnected from the Internet. So I disabled the DHCP and manually assigned each device to their own individual IP addresses static. This has not fixed my problem even if there are more conflicts of IP addresses.

  Then I tried to connect my computer directly to the WAG160N v2 via an ethernet cable, but each single device is always give themselves up randomly. Therefore, we have established that this problem occurs with the cable connections and wireless.

  After that, I did some research on the Internet and made a lot of adjustments and modifications that do not stop this problem.

  These including: lower the MTU to 1365, changing to channel wireless channels 1 and 6 (we were on channel 11), using a standard instead of a wide channel, lowering the keep alive - redial period from 30 seconds to 20 seconds, increasing the Redial period keep living to a maximum of 180 seconds, disable UPnP and disable the DHCP server on the router configuration page.

  I have same Access Restriction is turned off.

  I also checked with my ISP and we use the correct settings of Encapsualtion, multiplexing and Virtual Circuit.

  So I thought I would post here because we really need to have this fixed a problem and we do not know how. I can't find the logic of why this is happening. This problem shouldn't be complicated.

  Any help would be appreciated, thanks.

  My Internet has not disconnected for a week.

  Without reset and reconfigure my router, I did the following in the advanced wireless settings page:

  Reduced from 100 to 75 beacon interval

  Lowering of the threshold of Fragmentation of 2346 to 2306

  Lowering of the 2346 to 2304 RTS threshold

  I found this info from a different thread.

  I'll post again less than a week and if my Internet connection is always stable, I will mark this message as my solution.