Routing access to Internet through an IPSec VPN Tunnel
Hello
I installed a VPN IPSec tunnel for a friend's business. At his desk at home, I installed a Cisco SA520 and at it is remote from the site I have a Cisco RVS4000. The IPSec VPN tunnel works very well. The remote site, it can hit all of its workstations and peripheral. I configured the RVS4000 working in router mode as opposed to the bridge. In the Home Office subnet is 192.168.1.0/24 while the subnet to the remote site is 192.168.2.0/24. The SA520 is configured as Internet gateway for the headquarters to 192.168.1.1. The remote desktop has a gateway 192.168.2.1.
I need to configure the remote site so that all Internet traffic will be routed via the Home Office. I have to make sure that whatever it is plugged into the Ethernet on the RVS4000 port will have its Internet traffic routed through the Internet connection on the SA520. Currently I can ping any device on the headquarters of the remote desktop, but I can't ping anything beyond the gateway (192.168.1.1) in the Home Office.
Any help would be greatly appreciated.
Thank you.
Hi William, the rvs4000 does not support the tunnel or esp transfer wild-card.
Tags: Cisco Support
Similar Questions
-
Can I make my Vonage phone service and always access the internet through MSN Premium
Can I make my Vonage phone service and always access the internet through MSN Premium
Hello
The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.
How to contact MSN customer service
http://support.Microsoft.com/kb/940784
https://support.MSN.com/contactus.aspx?scrx=1
http://answers.MSN.com/forums.aspx?ProductID=29 -
Cisco ASA 5515 two asa firewall ipsec vpn tunnel is not coming
HelloW everyone.
I configured ipsec vpn tunnel between Singapore and Malaysia with asa firewall.
but the vpn does not come to the top. can someone tell me what can be the root cause?
Here is the configuration of twa asa: (I changed the ip address all the)
Singapore:
See the race
ASA 2.0000 Version 4
!
ASA5515-SSG520M hostname
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.15.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.5.3 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 160.83.172.8 255.255.255.224
<--- more="" ---="">
!
<--- more="" ---="">
interface GigabitEthernet0/3
<--- more="" ---="">
Shutdown
<--- more="" ---="">
No nameif
<--- more="" ---="">
no level of security
<--- more="" ---="">
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.219 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
connection of the banner ^ C please disconnect if you are unauthorized access ^ C
connection of the banner please disconnect if you are unauthorized access
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
network of the SG object
<--- more="" ---="">
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.15.202
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
<--- more="" ---="">
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.15.0_24 object
192.168.15.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
access extensive list ip 192.168.15.0 outside_cryptomap allow 255.255.255.0 object MK
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
debugging in the history record
asdm of logging of information
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
no failover
<--- more="" ---="">
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source SG SG static destination MK MK non-proxy-arp-search to itinerary
!
network of the SG object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 160.83.172.x 1--->--->--->--->--->--->--->--->--->
Route inside 10.0.1.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.2.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.11.0 255.255.255.0 192.168.15.199 1
Route inside 10.1.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.8.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.104.0.0 255.255.0.0 192.168.15.199 1
Route inside 192.168.8.0 255.255.255.0 192.168.15.199 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
<--- more="" ---="">
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http serverCommunity trap SNMP-server host test 192.168.168.231 *.
No snmp server location
No snmp Server contact
Server enable SNMP traps syslog
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 103.246.3.54
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto CRYPTO-map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2--->--->--->
life 86400Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
tunnel-group 143.216.30.7 type ipsec-l2l
tunnel-group 143.216.30.7 General-attributes
Group Policy - by default-GroupPolicy1
<--- more="" ---="">
IPSec-attributes tunnel-group 143.216.30.7
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
Overall description
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
<--- more="" ---="">
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:ccce9a600b491c8db30143590825c01d
: endMalaysia:
:
ASA 2.0000 Version 4
!
hostname ASA5515-SSG5-MK
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.6.70 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.12.2 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 143.216.30.7 255.255.255.248
<--- more="" ---="">
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.218 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
<--- more="" ---="">
Interface Port - Channel 1
No nameif
no level of security
IP 1.1.1.1 255.255.255.0
!
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
clock timezone GMT + 8 8
network of the SG object
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
<--- more="" ---="">
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.6.23
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.2.0_24 object
192.168.6.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything--->--->--->--->--->
VPN-INTERESTING-TRAFFIC extended access list permit ip object MK SG
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
outside_cryptomap to access extended list ip 192.168.6.0 allow 255.255.255.0 object SG
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
asdm of logging of information
<--- more="" ---="">
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500--->
reverse IP check management interface path
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source MK MK static destination SG SG route no-proxy-arp-search
NAT (inside, outside) static source NETWORK_OBJ_192.168.2.0_24 NETWORK_OBJ_192.168.2.0_24 static destination SG SG route no-proxy-arp-search
!
network of the MK object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 143.216.30.x 1
<--- more="" ---="">
Route inside 10.2.0.0 255.255.0.0 192.168.6.200 1
Route inside 10.6.0.0 255.255.0.0 192.168.6.200 1
Route inside 192.168.254.0 255.255.255.0 192.168.6.200 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http serverNo snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
--->--->--->
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 160.83.172.8
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
SSH timeout 60
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
<--- more="" ---="">
tunnel-group MK SG type ipsec-l2l
IPSec-attributes tunnel-group MK-to-SG
IKEv1 pre-shared-key *.
tunnel-group 160.83.172.8 type ipsec-l2l
tunnel-group 160.83.172.8 General-attributes
Group Policy - by default-GroupPolicy1
IPSec-attributes tunnel-group 160.83.172.8
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
<--- more="" ---="">
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endGood news, that VPN has been implemented!
According to the ping problem, my suggestion is to check, if some type of firewall based on host computers on both sides block ICMP requests.
Anyway, you can still use the capture of packets on the inside of the interfaces of the two ASAs, to check if the ICMP traffic is to reach the ASA.
In addition, you can try to enable ICMP inspection:
Policy-map global_policy
class inspection_defaultinspect the icmp
inspect the icmp error
--->---> -
Hello
I am trying to configure an IPSec VPN tunnel between my company and a remote company for the use of FTP secure.
I used the SDM to configure the tunnel on my router based on the information provided by the society that we are trying to connect to. The other company has provided my debug log when I was testing the connection, but I do not know how to read and what could be the problem. I hope someone here can give me an overview of what prevents the tunnel connection.
Please let me know if you need more information.
Thank you
Peter Haase
Peter,
Good job!
Because the tunnel is up, we must not debugs.
I'm glad that finally it works.
HTH
Sangaré
-
Internet through a RA IPSec VPN Tunnel traffic
Armed with an ASA 5505 Security Plus, I configure IPSec VPN for RA the VPN IP address pool is in the 192.168.2.0/28 network.
The Lan is 192.168.1.0/24 with inside interface a.254.
The VPN works great. What I would do is to route all internet through the firewall traffic when users are connected to the VPN. I put this gateway 192.168.1.254 tunnel, but I'm having no luck to get it works.
Any ideas?
Thanks in advance!
You are just going to route internet traffic to the remote vpn client to the ASA and backward on the Internet?
If the above statement is correct, you need not configure the tunnel default gateway.
But you need to configure NAT for the ip pool, so they can go to the internet, as well as the 'same-security-movement' command as follows:
NAT (outside) 1 192.168.2.0 255.255.255.0
permit same-security-traffic intra-interface
In addition, assuming that you have not have split configured tunnel.
-
RV180 VPN route all internet traffic via IPSec VPN
Hello
I install my RV180 to VPN to our headquarters Fortigate 60 C. It works really well
My only problem is that I don't know how to move internet traffic on our remote site by Headquarters. We want to use this technique so that all sites have the same web content filtering provided by our main Fortigate unit. I see clearly that all traffic destined to our internal network will go trough the VPN tunnel, but internet traffic will go through our modem at the remote site.
My way of fortigate thinking said that I need a static route to transfer all traffic through the VPN tunnel. I've read elsewhere that I need to set up some sort of ACL.
Anyone else has any ideas on this / has anyone successfully implemented somehting similar?
Hi Jared,
I don't think that RV180 takes complete care of tunneling. Complete tunneling allows you to all your traffic to VPN. RV180 made only split tunneling.
Thank you
Vijay
Sent by Cisco Support technique iPad App
-
Cannot access the Internet through WET610N to E4200
I have a number of devices which do not have the built-in wifi and WET610N allows you to connect wirelessly to the Internet. It worked with WRT610N router, but when I upgraded to router E4200 to Internet access no longer works for WET610Ns.
Internet access works very well with the adapter wireless from my computer, but the WET610N tests on my computer port ethernet confirms unable to connect to the Internet. Utility says Windows Server Troubleshooting DNS cannot be found.
Seems you have to assign a static IP address to each client using a bridge to connect wirelessly to the network of E4200. You can have the IP address of the client in the list of booking E4200 DHCP. The client will not have access to the Internet if their IP address in the DHCP reservation list.
I have a big thank you to Linksys support for not sharing this information. Try to put the blame on the bridge wireless and then try to charge me support because my WET610Ns were no longer under warranty.
-
VLAN internal cannot access the Internet through PIX501
Hello
Im having problems with my current setup. We have Cat3750 switch which acts as a base for intervlan routing. At the same time, we have PIX501 as a firewall.
the firewall is configured to statically map our Web server to the external network. The Web server is accessible from outside.
My problem is the following. Internal users cannot connect to the internet. Each user has been defined with gateway for their assignment of VLANS corresponding. VLAN internal works fine but can not access the internet.
Also, all users within our network cannot ping inner (192.168.1.7) address of the Web server. the Web server is directly connected to the switchport aboard PIX.
Our facility is the following: modem DSL - PIX 501 - Cat3750 (InterVLan routing) - access switches.
Pleasee see connected PIx and Cat3750 running config or reference.
all inpiuts will be highly appreciated.
Kind regards
udimpas
Add a default route on your 3750 score inside the PIX interface.
IP route 0.0.0.0 0.0.0.0 192.168.1.5
-
Satellite A300D - 13 X - cannot access the internet through wireless
Hi all, I wonder if anyone can help me, try and tell you my problem as clear as possible.
I am more able to access wireless internet. Tried to conect via the ethernet cable and that does not work either but broadband still work as my PS3 is still accelerating signal and can still connect via WiFi with my phone.
Everything was working fine one night and the next day nothing!
Any help greatly appreciated
Thank you
Mark
> There is a yellow exclamation point in Device Manager
> Cheked that all the drivers and they work properlyI put t know why you are 100% sure that the drivers work correctly if the yellow exclamation point appears in the Device Manager.
Once again; wireless network adapter appears on Device Manager-> network without any exclamation yellow cards?If this isn't the case, then you need to reinstall the WLan driver again!
The laptop seems to use the WLan-RTL8187B REALTEK card 802.11(B/G) and you need Realtek WLan driver:http://APS2.toshiba-tro.de/WLAN/?page=downloads
-
How can I make online games access the internet through a proxy server?
I currently have to use a proxy server to access the internet. I changed my browser settings to do this, but I can't play a game online that I instaled because they are not defined for internet access via the proxy server.
How can I make games use the proxy server to access the internet?
Help, please. See you soon!Abstergo,
You will need to have the proxy server configured to allow ports looking for the game or, if the game has the option, you can put in your proxy server information in the parameters of the game.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can access the internet without any problem in all browsers, but can program.
For example, when you try to install Windows Live Essentials, I got an error saying I need to be connected to the Internet (but I already was!) - error: OnCatalogResult: 0x8104000b.
And another example, I can't use Windows Live Messenger, apparently for the same reason, no internet...
Some additional info:
- I tried with an Ethernet connection and a wireless network
- I also disabled the firewall Windows, but which didn't help either...
Oh, by the way... I use Windows Vista .
Can someone help me please... ??
Thanks in advance
I forgot to say that my problem has been resolved.
It was lack of Norton. After the execution of the removal of Norton tool by PC is back online with no problems.
But thank you very much
-
Comments (Ubuntu) can not access the internet through host (XP)
I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection
I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.
Welcome to the community,
I think the problem is that my host and guest use different subnet masks default...
Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.
André
-
GRE and IPSEC VPN tunnel over the same interface
My client is currently connected to a service provider of call through a GRE Tunnel over IPSEC. They chose to move all connections to a VPN site-to-site traditional behind a firewall, here, to your corp office. As the questions says, is possible for me to put in place the VPN site to site on the same router? Interface Tunnelx both ethernet have the same encryption card assigned to the destination router. I thought that traffic could divide by identification of traffic 'interesting '. Thanks for all the ideas, suggestions
Ray
Ray
Thanks for the additional information. It takes so that the existing entries in ACL 101 remain so the existing tunnel will still work. And you have to add entries that will allow the new tunnel. Editing an ACL that is actively filtering traffic can get complicated. Here is a technique that I use sometimes.
-create a new access list (perhaps ACL 102 assuming that 102 is not already in use).
-Copy the entries of ACL 101 to 102 and add additional entries you need in places appropriate in the ACL.
-Once the new version of the ACL is complete in the config, then go tho the interface and change the ip access-group to point to the new ACL.
This provides a transition that does not affect traffic. And he made it back to the original easy - especially if something does not work as expected in the new ACL.
If the encryption of the remote card has an entry for GRE and a separate entrance for the IPSec which is a good thing and should work. I guess card crypto for GRE entry specifies an access list that allows the GRE traffic and for IPSec crypto map entry points to a different access list that identifies the IP traffic is encrypted through the IPSec tunnel.
HTH
Rick
-
IPSEC VPN tunnel on issue of Zonebased Firewall
Help, please!
I'm trying to configure a router lab ISR1921 to build the VPN tunnel with vmware vshield edge. The configuration of the 1921 is pasted below. There is not a lot of adjustment on the side of vshield really and I'm sure both sides are adapting to phase 1 & 2.
The question I have: the tunnel can be built correctly and I also see from show crypto ipsec release encap and decap counters. However the devices on each side can communicate. That said, I can ping from 1921 to the IP of the internal interface of the vshield with IP source specified. But just no communication part and other...
I did debugs and only "error" messages are:
01:58:03.193 20 February: ISAKMP: (1001): error suppression node 1656104565 FALSE reason 'informational (in) State d1.
...
01:58:03.193 20 February: ISAKMP: (1001): purge the node-1657220080
I hope that I did a stupid thing to configure error, but I spent too much time on it. It is supposed to be a really simple installation... Please help!
!
version 15.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
Lab-1900 host name
!
boot-start-marker
boot system flash: c1900-universalk9-mz. Spa. 154 - 1.T1.bin
boot system flash: c1900-universalk9-mz. Spa. 151 - 4.M7.bin
boot system flash: c1900-universalk9-mz. Spa. 150 - 1.M4.bin
boot-end-marker
!
AAA new-model
!
AAA authentication login default local
authorization AAA console
AAA authorization exec default local
!
AAA - the id of the joint session
clock timezone AST - 4 0
clock to summer time recurring ADT 3 Sun Mar 2 Sun Nov 02:00 02:00
!
DHCP excluded-address IP 192.168.100.1 192.168.100.40
!
dhcp DHCPPOOL IP pool
import all
network 192.168.100.0 255.255.255.0
LAB domain name
DNS 8.8.8.8 Server 4.2.2.2
default router 192.168.100.1
4 rental
!
Laboratory of IP domain name
8.8.8.8 IP name-server
IP-server names 4.2.2.2
inspect the IP log drop-pkt
IP cef
No ipv6 cef
!
type of parameter-card inspect global
Select a dropped packet newspapers
Max-incomplete 18000 low
20000 high Max-incomplete
Authenticated MultiLink bundle-name Panel
!
redundancy
!
property intellectual ssh version 2
!
type of class-card inspect entire game ESP_CMAP
match the name of group-access ESP_ACL
type of class-card inspect the correspondence SDM_GRE_CMAP
match the name of group-access GRE_ACL
type of class-card inspect entire game PAC-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-13
game group-access 154
class-card type check ALLOW-VPN-TRAFFIC-OUT match-all
match the ALLOW-VPN-TRAFFIC-OUT access group name
type of class-card inspect entire game PAC-cls-insp-traffic
match Protocol pptp
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
http protocol game
type of class-card inspect entire game AH_CMAP
match the name of group-access AH_ACL
inspect the class-map match ALLOW VPN TRAFFIC type
match the ALLOW-VPN-TRAFFIC-OUT access group name
type of class-card inspect correspondence ccp-invalid-src
game group-access 126
type of class-card inspect entire game PAC-insp-traffic
corresponds to the class-map PAC-cls-insp-traffic
type of class-card inspect entire game SDM_VPN_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the AH_CMAP class-map
corresponds to the ESP_CMAP class-map
type of class-card inspect correspondence ccp-icmp-access
corresponds to the class-ccp-cls-icmp-access card
type of class-card inspect the correspondence SDM_VPN_PT
game group-access 137
corresponds to the SDM_VPN_TRAFFIC class-map
!
type of policy-card inspect self-out-pmap
class type inspect PCB-icmp-access
inspect
class class by default
Pass
policy-card type check out-self-pmap
class type inspect SDM_VPN_PT
Pass
class class by default
Drop newspaper
policy-card type check out-pmap
class type inspect PCB-invalid-src
Drop newspaper
class type inspect ALLOW VPN TRAFFIC OUT
inspect
class type inspect PCB-insp-traffic
inspect
class class by default
Drop newspaper
policy-card type check out in pmap
class type inspect sdm-cls-VPNOutsideToInside-13
inspect
class class by default
Drop newspaper
!
security of the area outside the area
safety zone-to-zone
safety zone-pair zp-self-out source destination outside zone auto
type of service-strategy inspect self-out-pmap
safety zone-pair zp-out-to source out-area destination in the area
type of service-strategy check out in pmap
safety zone-pair zp-in-out source in the area of destination outside the area
type of service-strategy inspect outside-pmap
source of zp-out-auto security area outside zone destination auto pair
type of service-strategy check out-self-pmap
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key iL9rY483fF address 172.24.92.103
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
IPSEC_MAP 1 ipsec-isakmp crypto map
Tunnel Sandbox2 description
defined by peer 172.24.92.103
Set security-association second life 28800
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 150
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
WAN description
IP 172.24.92.18 255.255.255.0
NAT outside IP
No virtual-reassembly in ip
outside the area of security of Member's area
automatic duplex
automatic speed
No mop enabled
card crypto IPSEC_MAP
Crypto ipsec df - bit clear
!
interface GigabitEthernet0/1
LAN description
IP 192.168.100.1 address 255.255.255.0
IP nat inside
IP virtual-reassembly in
Security members in the box area
automatic duplex
automatic speed
!
IP forward-Protocol ND
!
IP http server
access-class 2 IP http
local IP http authentication
IP http secure server
!
IP nat inside source map route RMAP_4_PAT interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 172.24.92.254
!
AH_ACL extended IP access list
allow a whole ahp
ALLOW-VPN-TRAFFIC-OUT extended IP access list
IP 192.168.100.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
ESP_ACL extended IP access list
allow an esp
TELNET_ACL extended IP access list
permit tcp any any eq telnet
!
allowed RMAP_4_PAT 1 route map
corresponds to the IP 108
!
1snmp2use RO SNMP-server community
access-list 108 deny ip 192.168.100.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 108 allow ip 192.168.100.0 0.0.0.255 any
access-list 126 allow the ip 255.255.255.255 host everything
access-list 126 allow ip 127.0.0.0 0.255.255.255 everything
access-list 137 allow ip 172.24.92.0 0.0.0.255 any
access-list 150 permit ip 192.168.100.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 154 allow ip 192.168.1.0 0.0.0.255 192.168.100.0 0.0.0.255
!
control plan
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
line 2
no activation-character
No exec
preferred no transport
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
access-class TELNET_ACL in
exec-timeout 0 0
Synchronous recording
transport of entry all
line vty 5 15
access-class TELNET_ACL in
exec-timeout 0 0
Synchronous recording
transport of entry all
!
Scheduler allocate 20000 1000
0.ca.pool.ntp.org server NTP prefer
1.ca.pool.ntp.org NTP server
!
end
NAT looks fine.
Please create an ACL with bidirecctional ACEs and add it as a group of access to the interface of penetration:
IP access-list extended 180
IP 192.168.100.0 allow 0.0.0.255 192.168.1.0 0.0.0.255 connect
ip permit 192.168.1.0 0.0.0.255 192.168.100.0 0.0.0.255 connect
allow an ip
interface GigabitEthernet0/1
IP access-group 180 to
IP access-group out 180
Generer generate traffic, then run the command display 180 access lists .
Also, if possible activate debug ip icmp at the same time.
Share the results.
Thank you
-
ASA Cisco IPSEC VPN tunnel has not managed the traffic
Hi guys
I am trying to set up a new connection IPSEC VPN between a Cisco ASA 5520 (verion 8.4 (4)) and Checkpoint Firewall. I managed to establish the phases IKE and IPSEC and I can see the tunnel is UP. But I can't see any traffic through the tunnel. I checked the cryptomap both ends and try to test with a contionuous ping from within the network of the SAA.
I made a screenshot of ICMP packets but cannot see in ASA. I welcomed the icmp inside ASA interface.
I did a package tracer and it ends with a fall of vpn - filter the packets. But can not see any configured filters...
Your help is very appreciated...
Thank you
You probably need to add nat negate statements:-something like.
object-group network OBJ-LOCAL
Network 10.155.176.0 255.255.255.0
object-group network OBJ / remote
object-network 192.168.101.0 255.255.255.0
NAT static OBJ-LOCALOBJ-LOCAL source destination (indoor, outdoor) static OBJ-REMOTE OBJ-REMOTE-no-proxy-arpYou are running 8.4 nat 0 has been amortized
Maybe you are looking for
-
Do I need Adobe Flash Player for Android?
I'm a bit unsure about whether I need of the product called Adobe Flash Player in order to view Flash content in Android FF, or if Flash support is integrated into the browser. My camera came with Flash Player installed in the ROM, but updates go to
-
UN VPN installation in contact?
Hi all... in fact, I did installed vpn in contact in my iphone 4 and I even signed through my email but I do not it connected because I didn't know how to do... but in any case now, I decided to install United Nations and I don't want to use it if I
-
Hi, the carpet * UJ840-s only writes DVD - R x 2 and should be 8 x. It reaches only about 10 X on DVD - R reading too. I use Datawrite 8 X discs but you ordered some Taiyo Yuden 16 X and 8 X speed to try. Nero V7 reported only 2 X write with Datawrit
-
After an automatic update I lost access to the control panel and am now unable to run some other updates
-
do not install jscript update kb971961
Microsoft Update kb971961 - lack of install. Security for jscript. How do I know if I have jscript in my machine? I don't think I do. What is of import. JScript? This will help my machinc communicate and possibly speed it up?