Run myapp.rtexe without LabVIEW?

Similar Questions

• Create Setup without labview

  Hello

  Is it possible to create an installer without LabVIEW? I'm supporting Windows 2000 to 7 and software versions of NEITHER varies with each OS, especially when dealing with Windows due to conflicts VISA oscilloscopes.

  The two main problems I have with the creation of installers with LabVIEW (Application Builder):

  1) Windows 2000 requires the framework produced prior to 2.8.0. It is therefore impossible for installers run on Windows 2000, requiring the installation of the product more recent than 2.8.0 which is basically each installation for Windows 7.

  (2) as far as I know, the software must be installed on a local computer first before you can create a Setup program. Then, you go to the section of additional installers creating a Setup program to add to the installation. The location path will point to the orignal CD drive or location it was installed from the local disk. I do not see why it needed. Why can the Installer be created directly from extracted files without it installed on the machine?

  Thank you

  Wow guys, thanks for the blatent insults two. If you have nothing nice to say don't say it at all.

  A little more explanation:

  Press and hold Windows 2000 in 2014, I agree, are heavy. However, you will need to make these oscilloscopes that are running Windows 2000 in 2014 still cost up to $8,000 to replace and the operating system cannot be upgraded. Why always cost so much? Because they are very useful tools. New and cost $ 20 000 to $30,000. I don't think that this effort is "los [ing] [the company's] ability to make a profit.

  For those of you who are interested in Moose displayed question here is my solution.

  I used SFX Builder (http://sourceforge.net/projects/s-zipsfxbuilder/) to group software NOR in a single executable file. Here are the steps:

  (1) download all necessary software OR

  (2) download SFX Builder

  (3) download 7 - zip (http://www.7-zip.org/)

  (1) extract all the software OR in a single folder and 7-zip can compress them into one archive .7z

  (2) open the SFX generator and adds the tab file from archive .7z

  (3) you can easily set the path of extraction anywhere on the computer, the temp (%temp%) is most useful

  (4) the tab tasks, click add/plus button and select program to run, and then enter the path where the extraction happened, here's an example

  (5) easy as pie!

  

• run a VI in labview with Vision Builder (VBAI)

  HELO,

  I try to use the 'run VI' tool of the vbai (2010). When I lunch the inspection on my PC (with labview 2010) it's ok, but on another PC (without labview), I got an error message (dll is missing).

  I have to copy the data in a specific folder to use this tool?

  You have solutions to solve my problem?

  Thank you

  Ulysses

  If you read the context-sensitive help for the LabVIEW execution step, there will be clear instructions to operate the LLB for Vision Builder AI. I'm not including instructions here because they change slightly depending on the version of the VBAI you are using. However, here are some useful links:

  http://digital.NI.com/public.nsf/allkb/231D87B9D8C3B71A862572D4007EAAF8

  http://forums.NI.com/T5/machine-vision/quot-make-sure-all-of-the-VI-dependencies-including-VI-lib-VI...

  Access the LabVIEW execution step in VBAI, change it, then go to the help > show contextual help (Ctrl-H). In the FAQ tab, there will be a link to describe in detail how to build your LLB for distribution... read carefully and follow the directions.

  Hope this helps,

  Brad

• What I need to install in another pc without LabView and wants use executable Vi

  Hi, everyone, please, help me

  I want to use another VI without LabVIEW PC executable, what I have to do to run the VI.exe?

  Thank you

  At a minimum, you will need to install the LabVIEW runtime engine.

  You may need to install more depending on what your program does.  Maybe the drivers DAQmx or the VISA run-time.

• Use VirtualBench API without LabVIEW. Example: Python, dll, etc.

  Hello

  I would like to know if there is a way to use the API VirtualBench without LabVIEW?

  As the use of python or something.

  Thank you

  We just released version 1.1 of VirtualBench that adds a C API and a bunch of other features, see http://forums.ni.com/t5/VirtualBench/Announcing-free-firmware-update-version-1-1-adds-SPI-and-I2C/td....  With whom you could use VirtualBench in your programming language of choice if you write the appropriate links.

• Save the data of the 6000 USB without Labview

  Hi all.

  I'm sure that this questions is buried somewhere, so I apologize if I'm repeating a question that has already been asked and addressed. If this is a redundant question, simply pointing me back post relavent will help.

  I have a 6000 USB. I configured and works very well in a test panel Max is possible to log data acquired at one any file without Labview signal Express, studio or lab windows/cvi measurment? In a similar note, being able to acquire and record data without another routine of programming such as .net or C++. Maybe there is a way to create a task and call it from an excel macro?

  I know that I dug my own grave by getting to the bottom of the similar USB DAQ. However, even with the USB-6000, there must be a way to connect the data being acquired without having to invest more in software development. Does not seek to do anything fancy like trigger or manipulation of data, I'm looking to record the voltages measured to drop and do post processing in Excel.

  Still, I'm sure that this (or at least a similar) question has been asked before. Any help would be appreciated.

  Thank you

  Ben

  I think that Signal Express, it is what you really want to use here.  It was designed for the acquisition of very high level, simple as.

  In MAX, you can configure the task to save a PDM file.  This enabled, you should be able to leave just Signal Express your task and then tell him to stop whenever you want and the data will be saved.

• Run an application of LabVIEW 8.6 in win 7 (using the cDAQ-9172, 9219, 9422)

  Hello.

  I did a LabVIEW application for a few years. At that time, I used windows XP and labview 8.6. The material used is the cDAQ-9172, with NEITHER-9219 (reading of four strain gage sensors) and a NOR-9422 (using only a single input frequency).

  First of all, can I install my old version of labview 8.6 in my 64-bit computer to windows 7? I got an error message when I tried...

  Second, how much should I install? My old computer was slower after you install labview with its pilots. Perhaps I installed too much? Do I have to install 1, 5 GB DAQmx drivers?

  If I need a new version of labview for win 7, how much is an update?

  Thank you!

  Hello

  First version of LabVIEW which is supported on Windows 7 is LabVIEW 2009 SP1.

  Regarding the drivers, if you want to develop or run VI:s in LabVIEW with the DAQmx API, then you must install the full DAQmx driver.

  If you only meet built executable in the LabVIEW environment to run, then you just DAQmx Base Runtime.

  If you also want to be able to configure the data acquisition equipment (to the MAX) in a runtime environment, you should also Configuration DAQmx execution.

  For upgrades of licenses if please contact the local office of National Instruments or follow this link:

  http://ohm.NI.com/advisors/UA/pages/UA/intro.XHTML

  Best regards

  Klas Andersson

  OR Sweden

• I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  popihavaki,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/>

  05/05 / 1101:03: 23 am

• Want to run only 1 without anything else running program

  I have an audio software called Acoustica Mixcraft Pro Studio recording, but because of the other system shows and programs that run he drives my lag registration program and jump and does not have a lot.

  I was wondering if there was a way to run the program with NOTHING else on my system running only for solo performance for the program.

  Is it possible to easily activate or deactivate only run the program without having to put an end to all tasks in the Task Manager? Please let me know it would be a great help! Thank you very much.

  -JayP93

  With just open Firefox, my CPU shows a loading of 1-4%:

  

  If I killed all background processes, then I'd gain almost nothing.

  Now, I wonder what percentage of loading, you get on your computer when you have nothing other than the office running. If it is greater than 10%, which processes load the CPU?

  What load you get when running Acoustica Mixcraft Pro Studio?

  I suspect one of four things:

  • You have enough RAM. 4 is a good number for Windows 7.
  • You have an old machine with a slow processor. See below for a measure of performance.
  • Acoustica Mixcraft Pro Studio places a very high load on the processor. I use WavePad to my sound recording business and its CPU loading is moderate.
  • You have another software, for example a Rolls-Royce antivirus or a firewall that slows down the CPU.

  Below you can see the Performance of my machine index. You can join this table by right-clicking on 'Computer', then Properties, then Tools and performance Information.

  

• Run after effects without sequelae opening script?

  I have a project as a template. I want to run a script that is injected with the project and replaces the text according to the content of my file script and videos. So far so good, but I can run the script without opening after effects GUI? I use it now: afterfx - r c:\script_path\example_script.jsx. Is considered as best practice to have after effects GUI upward and running though goes a lot of script changes on the model? I'm looking for basically the same functionality as aerender with no graphical interface.

  -display undefined noui

  That's all

• Run the program without the need to license labview labview. is this possible?

  Hello

  I'm wondering - is it possible to have a labview program that can be run without the need to license labview?

  Now we can produce programs executables labview but they need licenses for labview.

  Best regards

  s Farashi

  You can create an exe from your source code. In order to make the exe, you need the professional version of LabVIEW or generator of the app to buy separately. The app Builder includes the ability to create a Setup program. You can run the Setup program on the supported of a windows OS versions.

• time of Labview application to run on pc without slow loading labview environment!

  Hello!

  I did an executable file of my project.

  When I run it on my pc (where installed labview development), I don't have problems and instantly loaded application.

  I tried to run the exe even on several other computers, all having the same trouble - the façade poped up after 2 minutes of waiting.

  I made a little test and pluged out the network cable - it solved the problem, but I need the network.

  I tried to disable the update automatic root certificate (as advised on a thread) but no luck.

  I searched the forums and found similar problems - but not solutions.

  Please help me.

  Guy.

  Yes. Problem solved.
  first turn off the auto root certificate update - no problem to find how to do this.
  Then type regedit in start-run, my computer-hkey current user-software-microsoft-windows-currentVersion-winTrust-trust suppliers-software publishing - just right-click on the state-change-change the character c to e, then press ok.
  Good luck and let me know if this helped.

• Running a LabVIEW application on a MAC without LabVIEW yosemite

  Hi all!

  When you compile the code LabVIEW on a Mac, you create a ".app" instead of a ".exe". I would like to run my ".app" to another Mac running with Yosemite (OSX 10.10) NI LabVIEW on it.

  I downloaded the latest RunTime for LabVIEW on the Mac engine in order to make the application run, but it doesn't seem to work...

  Someone there already is such a thing and would have a method to follow? :-)

  Thank you in advance!

  gvanhoeke wrote:

  When you compile LabVIEW code on a Mac...

  LabVIEW VIs are always compiled. You are probably talking about building stand-alone executable.

  gvanhoeke wrote:

  I downloaded the latest RunTime for LabVIEW on the Mac engine in order to make the application run, but it doesn't seem to work

  Instead of the 'later', you need the runtime engine that matches the version of LabVIEW used to develop the program.

  (Sorry, I have no direct experience with the Mac)

• Run a GUI without installed Labview labview

  I created a labview GUI and I need to my supervisor and monitor evaluation
  my camera prototype using this interface. I am in Ireland and they are in Berlin.

  Can you please indicate if it is possible for them to get a version of Labview to
  run this GUI only? If so, I will also build an application in my GUI (or rewrite my GUI)
  to enable them to do this? They can get a free trial for 7 days if its inappropriate.

  lolasue wrote:

  They can get a free trial for 7 days if its inappropriate.

  You can extend it to 90 days by checking the box and filling out the form when the 7 day period appears.

  Also, you can just reinstall the evaluation to get another 7/90 days.

• Executable VI generating an error 222 on Keithley 2612 although his run correctly when starting labview 2009 directly

  Hi all

  I have a VI that works perfectly and I can control, a 2612 Keithley has for measurements of transistor.

  The VI run well when I realize it from the computer that has the Labview 2009 (XP OS) platform

  Equipment (IE Keithley 2612 A) is related to another computer that is not labview 2009.

  I installed the Run-time-engine 2009 (32-bit XP OS) on this computer.

  Then, I create an executable of my VI with the option 'build application.

  The executable VI starts normally on the computer, but when I run it, I get an error message from the Keithley 2612 (which wasn't the case when I ran the VI directly from the computer haing LabVIEW 2009 installed on it). The error message is 222 (ie the long parameter)

  I thought I did something wrong and I create an executable from an original VI of Keithley (IE without modification). I get the same error message.

  When I create an executable with the runtime engine 2009 included (because it is possible to do with LB 2009), I am geeting the same error message.

  So I need to check step after step, when the message arrives but

  Someone knows something about such a question?

  Thank you

  Hi all

  Just for those who might experience a similar problem.

  I found the solution after fighting all the possibilities.

  The source of the problem was (for some reason) that the country setting of the computer was wrong

  and decimals are written with one, instead of a point.

  As I correctly reset the country setting, stand-alone files work normally.

  Best regards

  Youki