Run Visual C++ in Windows 7-getting started

Similar Questions

• The opening of the window to get started off the screen

  Hello

  I recently acquired a second display for my MacBook Pro, so when I have both connected displays and open Photoshop (on each screen) putting road window opens off the screen so I can't close it (see screenshot below). How can I fix it?

  Right now I have to open Photoshop with my second offline screen, close the window get started, then plug my second monitor.

  Thanks for your help in advance!

  ~ Taylor

  When you switch from Windows to the other display screens in Photoshop Photoshop close to this State Photoshop remembers where you position palette, picture windows and dialogue.  If you restart Photoshop and the other views are not available. Photoshop can open windows off the screen or partially off the screen.  At least seem be the way to a working windows.  Windows operating system provides means for moving and sizing of these windows.  Mac may also have options.

• Error running Visual C++ Library. He said that something is trying to access my computer?

  "My laptop works on Vista.  I get a message warning that a program is trying to access my computer and fix it in unusual ways on my C drive. It comes from the library of Visual C++ from Microsoft and reports a runtime error. When I try to make the X it told me to wait, and when he finished my screen go empty. I took the battery out and restart with the power cable the same pop-up window. (I've got press din't ok cause someone else did and it dint work) Error running Visual C++ Library.  I get a message warning that a program is trying to access my computer in an unusual way on my C drive. It comes from the library of Visual C++ from Microsoft and reports a runtime error. When I try to turn the x he go wait for me and then my screen is white. I took the battery out and restart with the power cable the same pop-up window. How can I fix this please.

  Hi Macyiorge,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: You can reinstall Visual C++ Library Runtime components.

  You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. right click top and select Uninstall.

  d. restart the computer.

  Step 2: Download and install the latest package and see if it helps.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84&displaylang=en

  For reference:

  What is a runtime error?

• WINDOWS DOES NOT START DELL STUDIO 1555

  MY DELL STUDIO 1555 UNBOOTABLE - PERIOD. WHERE CAN I GET A DELL RESOURCE CD BACKUP GAME, OR A COPY OF WINDOWS XP GETTING STARTED DISC? Help! WINDOWS VISTA HOME PREMIUM EDITION IS THE ORIGINAL ON THIS LAPTOP, BUT I WANT TO SWITCH/DOWNLOAD/INSTALL WINDOWS XP AND WINDOWS 7 OR 8.1

  Hello

  Thank you for your response.

  Please update the status of the result, we will be happy to help you.

• All of a sudden, I started getting double e-mails. I am running Vista and using windows mail. Does anyone have a solution?

  All of a sudden, I started getting double e-mails. I am running Vista and using windows mail. Does anyone have a solution?

  Usually, it is because the two copies of the account are set up.  Go to tools | Accounts | Mail and see if there is more than one copy of the account.  If not, then try to compact and repair the database (www.oehelp.com/WMUTil/) and analysis of e-mail what to do is not enable in your anti-virus software (see www.oehelp.com/OETips.aspx#3).  If this does not resolve things, try to delete your account, close and reopen WinMail and then add the account back again.

  Steve

• I can't install the update when I start the creative cloud. I'm getting an error 1002. I run a PC with Windows 7, 64-bit version.

  I can't install the update when I start the creative cloud. I'm getting an error 1002. I run a PC with Windows 7, 64-bit version.

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Service pack update from 1 to 2 now, I get a "windows did not start properly.

  I needed to upgrade my addition House of windows xp service Pack 1 to service pack 2 to add Norton to my system... I did it and my system asked me to re - start to take effect. I did and now I get the black screen that says white on it that says that windows did not start successfully... and start normally or in safe mode... I tried all the options and I get a dell screen and it goes straight to the screen... HELP PLEASE!

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• keyboard Microsoft creator - get a message that says: some features are not available when running on versions of windows prior to windows vista

  I installed the microsoft keyboard layout creator, but when I start the program I get a message that says: some features are not available when running on versions of windows prior to windows vista, I checked if my computer is compatible with the system requirements before downloading the program, can someone please help, thanks

  What functions are supposedly missing that you need?

  This?
  http://msdn.Microsoft.com/en-us/goglobal/bb964665

  Maybe you should have got version 1.3 instead?  (http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21476)

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". Got rid of the virus, but cannot get rid of "start".

  When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". I ran 6 different viruses, malware, rootkit, scans etc. everything looks clean, but 'start' is still there when I right click the executable files. How can I get rid of him? I tried the System File Checker tool, it didn't work. When I click on "Start" it is not now open applications.

  Do not know if it is any help.

  http://www.online-tech-tips.com/computer-tips/Windows-right-click-context-menu/

  Be careful when you change the registry so... Make sure that you have backups.

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• "Let's Get Started" upgrade to Windows 10, MB 2613,7

  N °

  Shit I don't WANT immediately. I have 7.1 Windows 64-bit and does not seek to update to 10 immediately I left working them the bugs out rather than be their Guinea pig.

  I can not install other updates (defender of the window, et al.) through Windows Update as the title is important on the Update window. When I check "all the updates available" it shows that I have updated 'important' (none are listed for 10) for windows defender and others, but when I select them and went back to the screen "install", it of "Let's Get Started" upgrade to Windows 10, MB 2613,7 and not pledging all other updates I just chose.

  Now I have (uninstalled) fact Kb3035583 option half a dozen times and it is NOT on my system more (that I can find) and was OK until 2 days ago (11 November) when I had to do the security updates monthly and a bunch of Office updates (including monthly scanning of malware). After that, I got the TITLE on my Windows 7.1 updates page saying, you guessed it, "Let's Get Started" upgrade to Windows 10, Mo 2613,7I did scans, newspapers turned on, and I can't find any article that mentions nothing other than the problem of Kb3035583 so I am confused.

  Please help me by removing the Windows 10 let's get Started option so I can continue to download updates for my current system.

  Thanks in advance.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I appreciate your efforts to try to solve the problem and I will definitely help you with this.

  Please follow the steps in method 1 to method 3.

  Method 1: uninstall the update of Windows as follows:

  Remove the Windows Update KB3035583.

  If the problem persists, follow method 2.

  Method 2: Rename the GWXUXWorker.exe

  Complete the GWX.exe process using the Task Manager. Also rename the GWXUXWorker.exe and the GWX.exe to .old as the location of the directory suffix: -.

  Windows\System32\GWX, if get any problems by renaming may give permission to respective filesystem and then try renaming again. OR you can remove the folder from the directory.

  

  If the problem persists, follow method 3.

  Method 3: The registry key to stop notification : -.

  1. Press Windows + R keys on your keyboard to open the Run dialog box.
  2. In the Open field, type regedit.
  3. Click on OK.
  4. Click Yes on the user account control (if prompted).
  5. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Gwx
  6. A right click.
  7. Click on change.
  8. In the data value: on the ground, DWORD: 00000001.
  9. Click on OK.
  10. Output the registry editor.

  Important this method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• How can I get run command Wizard in windows 7

  How can I get run command Wizard in windows 7

  Help & Support:

  That became the command run?

  The run command no longer appears on the start menu in this version of Windows. The search box that appears in the start menu provides much of the same functionality as the command run. However, the command run is still available if you prefer to use. You can even add it to the start menu for easier access.

  To add the run command to the start menu
  Click to open the taskbar and Start Menu Properties.

  Click the Start Menu tab, and then click Customize.

  In the list of options on the start menu, select the command box run and then click OK. Run the command will appear on the right side of the start menu.

  Tip:
  You can also access the command run by pressing the logo Windows + R key.

• On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »

  I am running Win 7 Pro.  On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll.  The specified module could not be found. »

  The error msg box provides an OK button. After clicking this button, everything seems to work well.

  FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.

  I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all.  Anyone know what program calls for this file? How can I get rid of this problem?   Any suggestions would be welcome.

  Thank you.  f* address email is removed from the privacy *

  Disabled under msconfig.exe startup items are moved to this location in the registry:

  HKEY_LOCAL_MACHINE Tools\MSConfig
  To permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:
  1. Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
  2. Create a System Restore Point.
  3. Start the computer with the CD in repair and check if the above Restore Point is visible.
  4. Start normally.
  5. Remove the offending registry key.

  Please mark my answer as 'Response' in this thread so that it can be closed.

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome