RV016 and WAP321 with a network of comments
I have two Cisco WAP321 AP and Cisco RV016 router.
I use the RV016 as the DHCP server for the network.
I would like to use the guest SSID mapped to a VLAN to issolate it the rest of the network.
How can I configure the RV016 to carry the traffic of the customer both VLANS and VLAN internal internet while using it as a DHCP server.
Thanks for any help.
John McArthur
Hey, it's essentially a non supported configuration. RV016 port supports only function VLAN and 1 single DHCP scope. If you want a staggered VLAN comments with the router something like a layer 3 switch must be put in place between the router and the AP to accommodate this configuration.
Tags: Cisco Support
Similar Questions
-
Dear friends,
Have you encountered a problem like this is Nati sp1 or sp2, currently when I get problem like that I solve (we run system restore or Startup Repair last option: reinstall the operating system)
symptoms: System very slow and unable to boot or just freezes on the Welcome screen, or sometimes not even vista starts in safe mode or safe mode command prompt.
I tried the next option, this has worked for me in some cases. but not many times.I open a command prompt terminal high, do you it by logging in as an administrator as launching the cmd.exe as an administrator (right click, run as administrator). Then type the following command that uninstalls the device said:
netcfg EI u ms_sstpminiport
want to know is there permanent fix or patches for this problem and why this is happening only in vista. I also had windows 7 and xp sp3. I had no problems in that.
Kind regards
King of the computer
See if the following Help article: http://www.vistax64.com/tutorials/171469-uninstall-device-device-driver.html.
If this does not work, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and go to the tab all. See if you can find the place where the device (or at least the driver) is loading and uncheck to stop to happen. Click OK and exit, and reboot and see if the problem persists. It cannot remove the device or the driver, but if he let them go then the problem is solved until we can find a way to remove actually - hopefully without needing a repair system/upgrade or a clean installation.
I hope this helps. I would like to know how it works.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Extend a network of comments with AEBS and TC set up a connection
Hi all-
I was wondering if anyone has had any success with that extends a network invited on two airports or more that are wired together. I use currently a Time Capsule as my main router (802.11ac), and have it configured with DHCP and NAT like fashion. It connects via a connection wired to an Airport Extreme Base Station (802.11ac), which is set in Bridge mode and configured with a static IP address to the primary time Capsule. The time Capsule is configured with a network of comments that is fully functional, and the AEBS extends the primary network using the same SSID and encryption on 2.4 and 5 GHz. However, when I turn on the AEBS remote networking reviews, I can connect to the AEBS, but cannot obtain an IP address (the computer displays an automatic address assigned). The SSID and the encryption is the same for both networks of comments. I tried to use "extend a wireless network" on the AEBS and that will extend the network, but it is extremely slow due to the wireless connection it creates between two access points (I have the TC and wired together AEBS to offer increased coverage, because my house is not very "friendly wifi").
I would greatly appreciate any help or insight anyone can provide, even if it's to tell me that a cable extension of the network of comments is not possible.
Thank you
Mike
Wired to the guest network feature extension is indeed possible and should be implemented and enabled automatically if you are using "Assistant" Installation from Apple to expand the networks main and guests.
I had this set up on the 2 airports and sometimes 3 for a few years and not a single hiccup.
Suggest that you reset the AEBS back to default settings and then use configuration Apple "Wizard" to set up the AEBS again. It automatically adapts the AEBS to expand networks main and guests. Everything you really need to do is enter a name of device to the AEBS, the wizard takes care of everything else for you. It is one of the simplest game ups ever.
Once you have the updated AEBS up and running, you can assign a static unit IP address if you want to, but it should not be necessary.
After the back if you need some advice on the use of the Apple Setup Assistant to do the work for you.
-
Wireless and network of comments and HREAP
Hello
I inherited a wireless infrastructure that consists of a head office with WCS and WLC more LWAPP access points.
There is a satellite office in another city who want to deploy a wireless infrastructure and it seemed to me like they want to only deploy a couple of AP that HREAP would be good to use this senario.
However, they also want to use the network without comment thread that we at Headquarters but I don't want their guest to come to our DSL modem that we have put in place for the guest HO wireless traffic. The two offices are connected via a MPLS who no longer have need of traffic thereon.
Is it possible to set up the HREAP and the WLC and WCS so that auxiliary office broke out locally for comments and even the admin Hall to HO can control the password?
Thank you very much
Hi Nell,
the feature you're looking for is "local switching REAP H."
So, you can set the access point remote mode H-REAP (which optimizes for "behind a WAN link") and from there, you can define multiple SSID as "local switching.
This means that everything related to the phase of authentication is managed by WLC, but after authentication, traffic fell locally to the AP and not transit through the WLC.
Guest SSID must be enabled for local switching, and then, on the APs REAP H, go to the configuration of the AP (in tab 'Wireless' WLC, then click ap) and on the hreap tab, you can configure the vlan where the traffic of comments will be abandoned at the remote site. It must be a vlan that exists on the remote site, and users will receive a DHCP address on this vlan.
Kind regards
Nicolas
-
My iphone shows no service with all networks in Egypt also sometimes works and all this happened all of a sudden
If your provider supports iPhone
I'd look for an update to the carrier
Settings - carrier - it will pop up if available
And if there is none then speak to the carrier a replacement of the SIM card
-
Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.
Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.
-
Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?
Hi stuckfree,
The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
-
original title: can't see the computer on wireless internet!
I hope that's not too much detail, but I would like that the sequence of events to be clear...
I have a Dell desktop computer that's probably six or seven years now. It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software. It works beautifully.
Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities. I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver. No problems.
The Dell laptop is dead and the DLink receiver has not been used for a long time. Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard. Still no problem.
I got a new ASUS laptop, I also linked using the Windows Wizard. STILL no problem.
Now, here's the problem comes. I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box. Then I can connect correctly, but I don't see this computer on my wireless network. Bad luck... because I want to be able to access share files. When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.
So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows? I uninstalled the software of DLink, but it seems to have no effect at all.
BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7. I can see all the computers on the network with the exception of the original Dell desktop computer wireless.
Any help would be appreciated!
Hi Joe and DonnaLoth,
The network will have to be changed to allow the computer Windows XP join a workgroup.
You can also read the following article.
Networking of computers running different versions of Windows
-
Can WRT54G and XP with WINDOWS/7 on the same network?
I run a wireless home network using a LINKSYS
WRT54G 2.4GH, connecting a desktop computer and a
laptop, both running WINDOWS/XP SP3. The
laptop recently crashed and I need to replace
soon. The office is running OK, but is also quite
old and will probably be replaced enough
soon.
I have a big thing in area shopping
so I did not have a strong sense of the price
involved in a replacement. Assuming that I have
can not replace the two
systems more or less to the
Moreover, because of the costs, I probably need
to replace the notebook now and wait to replace
the desktop computer. Assuming that this sequence:
-There will be some problems of network hardware
to make the new book can co-exist with the
WRT54G? Wouldn't not possible (and smarter) to
replace the WRT54G now with something that could
be used now and in the future when the
Desktop is replaced?
-Can I get a laptop that comes with
XP and is expandable (at reasonable cost) to
7? Or that it will be possible to run with 7 on the
laptop while I am still running XP the
desktop computer? I don't think that 7 running on the desktop
is an option, because it has a limited memory
Although I suppose I could upgrade the memory.
Should I still who?
Should I cross-post this to others
WINDOWS
Forum?
TIA,
Phil
Hello
Cable/DSL wireless router are stand alone devices that are supported on any computer with Ethernet networking capabilities (cable or wireless).
All versions of Windows + Apple + Linux may run together when connecting to a router as the WRT54, and/or routers newer wireless for the end user.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
"Unidentified network".
Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanksGo to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.
Do not put a check in the box: remove the software driver for this device.
Restart your computer and Windows will install your wireless network.
If the problem persists, see if your computer manufacturer has an updated driver.
These articles may help:
-
Network of original office title: small
you have a small business with 4 desktop systems and 2 laptops mobile network. you want all of their network. What haredware would need to connect desktop computers and laptops to another so that they can share information?
Hello
For the configuration that you have explained, you can connect computers and laptops in the network using a wireless or wired connection.
For more information:
What it takes to set up a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network
Although the article refers to the home network, it applies to small business network as well.
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network
-
When I start the computer and go to the Office to join I / E 10 on the notification area indicating the access to internet, the 3 network icon has been
change to the 4 network with no access to the internet and to this day it has changed to network 3 with access after a short period. I had some
pages not being not able to view also. This happens not all the time well.
Omer
Hi, Omer,.
You are using a wired or wireless network?
This problem may occur if there is more than one wireless network set up on your computer.
If you use a wireless network, I recommend you to uninstall and reinstall the wireless network and check if that helps.
1. Click Start and select Control Panel.
2. open the network and sharing Center.
3. click on manage wireless networks.
4 remove all wireless network listed in this list.
5 restart the computer and you reconnect to your wireless network.
Keep us updated on the status of the issue.
-
Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available. Totally frustrated that many files need this program to open.
I got this program for years. Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.
There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.
Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/
Kind regards
Meenakshi
-
Problem with external network profile and DHCP
Hello
Is it possible to create a network without IP range profile, in order to use the external DHCP protocol.
If I create a network without ip range profile I got this error when I submit an application VM:
[catalog] Com.vmware.vcac.platform.rest.client.error.ResponseErrorHandler.handleError:55 - [error rest] ERROR: {status code: 400}, {error code: 42300}, {error Source: null}, {Msg of error: a server error occurred.} Error the applicant unit. {The list of unallocated IP addresses for the network profile (mynetworkprofile) has been exhausted.}, {System Msg: error of Infrastructure service provider}
I'm sure we can do it, but I don't know how
Max
Simply create the profile of any network. Just assign the reservation with the network that you want to use, and the virtual machine will get his IP from the DHCP server.
vCAC will not be able to manage these addresses because DHCP manages them--if that's what you want to accomplish...
-
I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.
Hi Mariam,
Please try this:-with your PDF document open, click on the "comment section" on the side right of your document, under "list of comments", click the "Filter comments" icon and choose "View all comments" or "hide all comments.
I would like to know if it works.
Kind regards
Nicos
Maybe you are looking for
-
I dropped my iphone 4s in the water, but it still works?
I actually dropped my phone in the water before, but it worked fine afterwards, despite the fact that I have did nothing. I went in the bathroom again today and it seemed to work very well and I don't think anything of it. All sounds have worked, the
-
Hello, I just bought a HP 15 C which displays a message of ERROR when turned on. I have to press buttons at random to get past this message after which the calculator works normally. It can be power with no other ERROR PR display on and off. However,
-
HP Envy Phoenix 1300 t h9: lack of Audio driver
Hello PN #C1V11AV. I just reset my desktop and everything seems fine except that it does not reload "IDT High Definition Audio CODEC" and you can see that I've encountered. Any ideas? Thank you.
-
Why I do not think my collection full of music on mac, but can be downloaded on my iphone6
While the music of David Bowie in my music in iTunes search, I found that on my Macbook Air, I see that the last music 12 months then on the iPhone 6, I see my complete collection - I found that I already had the cd so does not need to buy them again
-
Insert the key on the L750D Satellite
I would be that to be able to overwrite text when I'm not working in Word, but when I press the "INS" Insert key nothing happens really. Am I missing something?