RV220W - LAN users not hit services served on the WAN

Similar Questions

• I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  SMS or text messages, are a specific function of the carrier. You must have an addition of text on your cell phone plan. If you can not send SMS, you must contact your operator to solve the problems.

• SA520W does not get an IP on the WAN option

  We use a SA520W as our main router and have a fiber attached to the interface default WAN connection. We would like to improve our availability using a secondary internet connection on the WAN interface option.

  We bought a router dovado tiny 4g for this another connection. It acts as a dhcp server, but the Cisco router does not get an IP address from the dovado router. The router works as expected when it is connected to a normal computer. But somehow the cisco router does not get an IP address.

  I also tried to put a static IP address for the Cisco router, but that did not help either. The dovado router is setup deliver ip in the range of 192.168.0.2 - 254

  Link is established, but State wide AREA network is down. Any ideas?

  

  Christian,

  Make sure that the port option is set to WAN and WAN mode = MODE of LOAD BALANCE. If not pull an ip address or to negotiate a connection.

  Jasbryan

• Allows users not able to connect to the server through Vmware Player Flex

  Hi all

  I created a Horizon Vmware server with Flex. Created Windows Image and saved the VM in the Flex web console. The configured policy and gives the right to some windows domain users to use this Image.

  I created a group called "Mirageadmin" and added two users in this group. Mirageadmin belongs to a group of Administrators local and also added to the Administrators group in the console of Mirage . These two users can connexiona Horizon flex web console.

  My problem is that when the user right connect to the server through Vmware Player Flex, its list of username or password is incorrect, please try again. But the user name and password is correct. Later one of the user added to the Mirgaeadmin group policy gives right I. While this user can connect to Flex server via Vmware Player.

  
  

  1 should. users entitled be part of the local administrator group of the Flex server?

  2. do I need to add these users right somewhere in the console of mirage?
  

  Thanks for supporting.

  Hi all

  Turn history on security locally should be set in the server included users who try to connect via Vmware Player.

  Our GPO has been tighten to allow only to administrators and users authenticated to allow log on locally. Adds a new GPO to enable a group of users to log on locally, which solve the problem.

• do not have a server in the list of servers SOA trying to deploy the application

  Hello
  I'm on JDev 11.1.1.6, MDS created in 11.2.0 server.
  Trying to deploy a simple composite test in the application server installed with JDeveloper.
  I see no "SOA servers" in the list.
  Administration server is up and running, is so that managed, Node Manager seems fine, not to use proxy in JDev preferenxes, the connection status of the Application Server is very well put to test.
  I've seen quite a few comments on the same subject, but so far didn't come to those who give a solution that works for my case. Any trusted is welcome.
  
  Thank you
  Anatoliy

  No, it isn't. Sorry, what it has to do with my problem?

  If you have not soa-infra app, then SOA Suite is not installed/configured for your domain name... You need SOA Suite to deploy composites...

  Check this box...
  http://docs.Oracle.com/CD/E23943_01/doc.1111/e13925/configure.htm#CFHCGFHD

  Also take a look at article 3.1.6 extending to a domain in the same document...

  See you soon,.
  Vlad

• User not DBA trying to access the binary sqlplus: AIX

  DB version: 11.2
  Operating system: Aix 6
  
  I created a user level oracle DB called testusr and I created the unix user called testusr as well.
  But when I try to run sqlplus, I get the following error.
  

  su - testusr
  $ whoami
  testusr
  $ id
  uid=1690170420(testusr) gid=206(svgrp)
  
  export ORACLE_HOME=/u01/oracle/11.2/db
  export ORACLE_SID=orcl
  export PATH=$PATH:$ORACLE_HOME/bin
  export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
  
  $ sqlplus /
  ksh: sqlplus:  not found
  
  $ ls -alrt /u01/oracle/11.2/db/bin/sqlplus
  /u01/oracle/11.2/db/bin/sqlplus: No permission   #This file actually exists

  This is the setting of the ACL for /u01/oracle/11.2/db directory ORACLE_HOME. testusr belongs to the Group of svgrp that has
  been granted read and execute privileges.

  cat /tmp/acl_settings_for_OH11.2
  *
  * ACL_type   AIXC
  *
  attributes: 
  base permissions
      owner(oracle):  rwx
      group(dba)   :  r-x
      others       :  ---
  extended permissions
      enabled
      permit   r-x     u:manh
      permit   r-x     g:kevh
      permit   r-x     g:svgrp

  No idea why the testusr can not see sqlplus binary?

  You need to check the permissions for each of the components of the path: /u01/oracle/11.2/db/bin/sqlplus

  Thus, each directory path
  / U01/oracle /.
  /U01/Oracle/11.2/
  /U01/Oracle/11.2/DB/
  /U01/Oracle/11.2/DB/bin/

  must have read and execute permissions (but NOT write permissions)

  And, of course, the sqlplus binary must have read and execute permissions.

  Hemant K Collette

• can I set up parental controls for a user not being able to access the internet to all___parental controls

  is it possible to disconnect a user on the internet

  Hello

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows could not start service CF2016 of the application on the local computer.

  Hello

  After a new installation of CF2016 all CF services work fine, but after I updated the "Java and JVM" she asks to restart the CF service, but when I do, I get the below error. Please help let me know the fix for the bottom.

  

  Thanks in advance.

  Java and JVM

  + 1

  Ditto for roll back the JVM settings. If you have made changes to JVM CFadmin then the previous settings would be cfusion\bin\jvm.bak. We can rename it to something else and then rename jvm.bak in ShadoMX/util/Flex/SDK/bin/jvm.config, kill CF and try start CF.

• access to users in presentation services to remove the application in Myfolder

  Hello gurus,
  
  Is there a way to give permission for users to remove it queries saved under there own Myfolders rather than shared folders
  
  Kishore

  Here you go...

  Each user can delete his request under my files...

  Go to the link of responses... then in the left corner you will find "manage catalog" click on it

  and from there, users can delete their individual request...

  Hope that's helpful...

  Thank you
  Ashish Gupta

• "" Cisco ASA multiple defects remote control let users deny Service and bypass the security controls ".

  Recently we have heard people talk of "Cisco ASA several flaws let users deny remote Service and bypass the security controls" under the securitytracker. However, as everyone knew, ASA 8.3 need a lot more resources on ASA HW to run. I checked that the bugs associated to above problem "CSCtg69742, CSCth36592, CSCtg61810, CSCte53635, CSCte46460, CSCte20030, CSCtf29867, CSCte14901, CSCsz80777, CSCsz36816" in the Cisco Bug Toolkit. None of them show any information if there is a fix for ASA 8.2 (x).

  This means that Cisco starts to stop supporting 8.2 (x) and to push customers to their "so-called" best image 8.3 version (x) as a strategy of "marketing?

  Cisco is best to find a solution for this problem on 8.2 (x) rather than push customers to something Cisco "love." It may not be the best interest of the customers AT ALL. Instead of pushing customers to ASA 8.3 (x), Cisco likely to push customers to its big competitor Juniper:)

  Sean,

  I did a quick search on the Bug Toolkit for CSCtg69742 and found the following result.

  Fixed in
  8.2 (3)
  8.3 (1.5)
  8.3 (2)
  8.2 (2.15)
  8.2 (2.107)
  100,7 (0.17) M
  100.5 (5.16) M
  8.3 (1,100)
  100.7 (6.1) M
  8.4 (0.99)

  This was posted in the column on the left side of the search results page.

  I recommend you research each ID of Bug Bug Toolkit (http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs) for the version name (number) that contains the fix for this bug.

  HTH

  Amol

• Windows 7 goes into sleep mode when not in service

  Computer completely locked up all night, had to make a stop/reboot power strip, now everything works fine, but it won't in standby mode when not in service, regardless of the settings I can give it in the control panel

  I want to emphasize this happened after I downloaded rage radio, although I've uninstalled it quickly after realizing I was didn't want or need and I loved all the extra stuff that goes with it.   Have no idea if they are related or not...

  I checked for updates of driver in the Device Manager specially for the new mouse I had installed.  He said that the device was working properly.

  I did the boot as described in the previous post, with no result.

  Not having anything better to do, I decided to try reinstalling the original mouse (disconnect the new mouse from the USB port and plug the original mouse) starting the computer working properly.

  There is clearly some kind of conflict with the new mouse, but I have no idea what it could be.

  Anyway, thanks a lot for your help.  I'm happy to have solved the problem!

• Error in windows 2003 Standard Edition with Service Pack 2... The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Could someone fix for the error below...

  OS: Windows 2003 Standard Edition with Service Pack 2...

  Event type: error
  Event Source: DCOM
  Event category: no
  Event ID: 10010
  Date: 08/08/2012
  Time: 10:00:31
  User: n/a
  Computer: BP1WHIAP011
  Description:
  The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Hello
  For assistance on this issue, you can post your question in the Technet Forums.
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.