RVS4000 and IPv6

Similar Questions

• Caching server and IPv6 support

  Anyone know if it is possible to configure the server for caching to work if you are using a dual stack IPv4 and IPv6 network.

  When running dua-stack all client devices will prefer IPv6 when it is possible so set cache server service from Apple is to see every customer who logs as coming from a separate network rather than a single network. It doesn't seem to be a way to configure the server caching on OS X Server 5 for an IPv6 subnet, it accepts IPv4 addresses.

  Before that I have to submit this as a bug can someone prove me wrong with a workaround to get a double network stack to work with caching server.

  I got this job, it was just a matter of editing the configuration file server caching by hand to add the IPv6 range.

  The configuration file is located in /Library/Server/Caching/Config/Config.plist

  Make sure that the caching server does not work as you change the configuration file.

  Open the file in the Terminal for editing and search for the following text:

  < key > PreviousDataPaths < / key >

  < table >

  < string > / library/server/cache/data < / string >

  < / array >

  < key > region < / key >

  < string > 65622637284725D55356E27799AC1535 < / string >

  I will use the example of a range of IPv6 for the following subnet, 2001:377:3f:65ec: / 64

  Change the configuration file to add the IPv6 range as follows:

  < key > PreviousDataPaths < / key >

  < table >

  < string > / library/server/cache/data < / string >

  < / array >

  < key > PublicRanges < / key >

  < table >

  < dict >

  < key > first < / keys >

  < string > 2001:377:3f:65ec:0:0:0:0 < / string >

  < key > last < / key >

  < string > 2001:377:3f:65ec:ffff:ffff:ffff:ffff < / string >

  < / dict >

  < / array >

  < key > region < / key >

  < string > 65622637284725D55356E27799AC1535 < / string >

  Now add the TXT DNS record in the zone file located in /Library/Server/named/db.example.com

  _aaplcache._tcp 259200 IN TXT "prs = 2001:377:3f:65ec:0:0:0:0 - 2001:377:3f:65ec:ffff:ffff:ffff:ffff.

  Now start the update server cache and restart the DNS server if it is running.

• A protocol that would provide the service for IPv4 and IPv6 traffic? (RIPv1, RIPv2, RIPng, BGP)

  A protocol that would provide the service for IPv4 and IPv6 traffic?

  • RIPv1
  • RIPv2
  • RIPng
  • BGP

  Hi SandeepTandel,

  ·         Your computer is on a domain network?

  ·         What exactly is the question do you face?

  Here the following protocols provide for IPv4 and IPv6 traffic or respectively:

  Ø Bng supports IPv4 and IPv6 protocols

  Ø RIPng supports IPv6

  Ø RIPv1 and RIPv2 supports IPv4

  Let us know if this information useful.

• IPv4 and IPv6 connectivity says no Internet access

  My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.

  Hello

  Internet works with IPv4.

  I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack, MVP-Networking. WWW.EZLAN.NET

• IPv4 and IPv6 are not connected. How / can solve this problem?

  I have a laptop, Wi - Fi and Windows 7. Tried to install the Service pack update and had trouble completing install. Computer Retored previous date, and now I can't connect to the internet. My network is available, but get the error 'conncetivity' and 'limited access' error. When I pull the IPv4 and IPv6 "not connected read properties." Tried to config IP of the term, but nothing comes. I guess that no IP address. Not really sure what to do from here. In addition, something happened to all my previous dates "restore." Only available date is when I tried to install the Service pack.

  Hi JessB,

  1. what version of IE are you using?

  2. What is the full error message?

  Follow the following troubleshooting methods:

  Method 1:

  I suggest you run the network troubleshooter utility and verify the exact cause.

  Check out the following link to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7

  Method 2:

  Perform the following steps to enable IPV4/IPV6 addresses.

  Step: 1

  a. open the "Network connections" window, right click to 'connect to the Local network' and click Properties.

  b. Select 'Internet Protocol Version 6 (TCP/IPv6)' and 'Protocol Version 4 (TCP/IPv4) Internet'

  c. click OK.

  Step: 2

  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "

  b. right-click on the network connection, and then click "Properties".

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.

  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  e. click 'OK '.

  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  h. click on 'OK '.

  Restart the computer.

  I suggest you perform the troubleshooting steps and run the hotfix in the following article to activate IPV6 protocols.

  How to disable or enable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008

  Method 3:
  

  I suggest you to rest TCP/IP and check its operation.

  To reset TCP/IP stack to refer to this article and follow the instructions.

  How to reset the Protocol Internet (TCP/IP)

  Method 4:

  Perform the following troubleshooting steps.

  Internet Explorer cannot display this webpage

• IPv4 and IPv6 connectivity

  I have wireless and connected displays IPv4 and IPv6 No. Inernet. Both can I or how can I connect to IPv6

  At this point, you do not have * need * IPV6 and is not something you need to worry. At some point in the future, IPV6 will become a big problem, but most of the devices now are not actively using it.

  I hope this helps.

  Note: If you Google IPV6 you can find a lot of information about this.

• can I configure an IPv4 address and IPV6 on the same NETWORK card

  I test double stack IPv4 and IPv6 on a firewall.  Can I configure IPv4 and IPv6 addresses on the same NETWORK card using a laptop installed with Windows 7, in order to test the firewall for both IPv4 and IPv6 protocols access? And if so, how to configure the NETWORK card?

  Thank you

  Jack P.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

• I have a computer that is running windows 7 on our network that there protocols in ipv4 and ipv6 and wont allow me to get rid of one.

  The problem is that they both take an IP is static and a dynamic that is playing with the other computers.Computer performs an IP address and I have someone lose their Internet connection.  Is a static IPv4 and ipv6 is dynamic.

  Thank you

  Ok.. What is
  Start > type cmd into the search bar > right click and select "Run as Administrator" > at the prompt of > ipconfig/release > reboot and see if it's still there.

• What is the difference between ipv4 and ipv6?

  original title: Internet connectivity

  What is the difference between ipv4 and ipv6 connectivity connectivity and which one should I use?

  IPv4 - https://en.wikipedia.org/wiki/IPv4

  IPv6 - https://en.wikipedia.org/wiki/IPv6

  IPv6 deployment - https://en.wikipedia.org/wiki/IPv6_deployment

• Cox and ipv6 connectivity

  I was told by Cox cable, since decmebre 2015 that the Airport extreme is causing intermittent problems with internet connection when you use the internet service from cox and this is due the iPV6 issue. They are trying to restore service, but have not solved the problem. Does anyone know what it is and how to turn off connectivity iPV6 on my extreme choices of internet options apple will affect my internet experience that is speed and safety, or not at all?

  Change the Internet setting for IPv6 on your AirPort Extreme could help maintain your Internet connection, which is more stable, but it will disable also any IPv6 service that may be available on the Cox system.  Security and connection speed are not affected.

  

  Another way to say the same thing, is that your AirPort Extreme will behave the same way he did before Cox began to incorporate recent changes to IPv6 in its system. Before Cox implementation of IPv6 changes, there is no problems with Apple routers.

  Apparently, Cox took the decision to implement IPv6 in its system differently than other suppliers, and it is causing issues with Apple routers. I don't know if other brands are affected.

  If it is an Apple problem or a problem of Cox is open to question, but it might be interesting to note that users of Comcast and Time Warner are not having these same problems with Apple routers IPv6, while we see many posts from users of Cox almost every day.

  I got IPv6 running on a connection to Time Warner here for about six months with zero problems. A friend who has Comcast service reports even.

  As far as I know, Apple has all the instructions on it, not is not possible to say at this point that the issue is all about Apple, Apple and part of Cox, or Apple is not actively involved in the problem at all.

• EA3500 and IPV6

  I would like to set up my Ver.1.1.39.145204 EA3500 to use IPV6 just to see if a difference, it was compared to IPv4.

  But I have no idea how to set it up.

  I am on Windows 7 and my ISP is Comcast.

  Under Convectivity, I have the following IPV6 configuration

  Automatic IPv6: enabled

  DUID has a set of numbers

  6rd tunnel disabled

  I saved this setting.

  I shutdown - unplgged modem - off computer computer and unplug the router.

  Reconncted and restarted.

  When I check my my IP address via internet, I'm still seing IPv4.

  Any help would be welcome.

  I got your ipconfig output and for your Local network connection, no address IPv6 do show. This means that IPv6 is disabled on your ethernet card.

  To enable IPv6 on the Local network connection:

  Panel-online network and sharing => change the adapter settings => right click on Local area connection, and then select properties-online check mark IPv6

  

  Then send me an another ipconfig

• WRT610N and IpV6?

  I have the last update of firmware posted the 1.0 model the WRT610N.  Test - ipv6.com is not reassuring, since pure IpV6 sites do not react, but I don't know if it's my router or some other problem.

  The WRT610N will work correctly once IpV4 disappeared, or am I intended to buy another router?  Except if forced, I'm perfectly happy with this one.

  Thank you...

  The WRT610N does not support IPv6.

  But it doesn't matter. IPv4 has not disappeared. And will not disappear. At least for a very long time.

  And as long as you don't need a site that is only accessible via IPv6 it won't matter anyway. And even in this case, Windows supports different IPv6 tunnels that allow your computer to use IPv6 even if your router is not.

• IPv4 and ipv6

  tell business-pc Vista is connected-don't support ie7 page-i read somewhere that we can change the ipv6 configuration in the registry so that it uses ipv4 more effectivly

  http://www.mydigitallife.info/2007/09/09/disable-and-turn-off-IPv6-support-in-Vista/

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help... Homegroup and IPV6

  Trying to set up a homegroup, I told myself in troubleshooting to enable, configure IPV6. When I go to network connections and right click and go to properties that ipv6 is enabled, but it still doesn't work do not.  What I am doing wrong?

  Windows 7 Verizon FIOS Internet

  Hello

  Maybe this can help

  To enable or disable and fix the components of IPv6 - http://support.microsoft.com/kb/929852

  General help in homegroup.

  Group home-networking-the-easy-way - http://windows.microsoft.com/en-us/windows7/help/home-sweet-homegroup-networking-the-easy-way

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links

  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions

  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password

  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup

  ----------------------------------------------------

  Inclusive Post on file share Win 7 and other versions of Windows.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/68d10f8c-2800-4E10-9cc1-9bcb44597d2b

  Jack-MVP Windows Networking. WWW.EZLAN.NE

• SPA112 and ipv6

  How to enable ipv6 in spa112 to accept the definition of fx line with ipv6 and asterisk 1.8?

  SPA112 is declared extensible IPv6. But none of these updates are available, as far as I know. You have SPA112 with IPv6 support?

  On the other side, why you ask something like that? SPA112 is not suitable for deployment in public IP addresses. For private, closed, LAN, you can use a private IPv4 addressing scheme.

  In advance, IPv6 is a brand new feature for Asterisk 1.8. There are a few problems with asterisks. You should consider to avoid IPv6 for production deployment.