S/PDIF does not not on Satellite P100-191

Similar Questions

• Graphics performance on Satellite P100-191

  I bought the laptop Satellite P100-191 yesterday, but I experienced a few problems of extreme performance from the beginning. I just reinstalled the standard display driver (Forceware 84.00 Toshiba) and changed some settings of Windows (uninstalled programs, services, etc.).

  After the execution of Mark 3D! 2003! I get the result of some 6,000 Marks 3D, which is half of what this laptop should perform normally. I have the feeling that there might be a problem with the heat, because the bottom of the laptop gets VERY hot and continuous performance decrease over the system is running (up to less than 1 FPS). But since I don't have much experience with laptops, I can't tell if it's the right conclusion, or if there is just a 'bad' setting in the BIOS or somewhere.

  So, I hope that someone of you can help me so that I can soon enjoy work and play correctly with the P100-191.

  THX

  There must be something wrong with your book, I 3dmarks03 13,600 with 191. Please check your settings und graka your energy settings, put it on the desktop. Mayby you have worked with battery?

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• WebCam works does not in Satellite L50-A-18R in Windows 10

  Hello

  A few weeks after an update of windows or something, the webcam has stopped working under windows. It is not a hardware problem, as it works fine under Ubuntu.

  Laptop model: Toshiba Satellite L50-A-18R
  Webcam hardware ID: USB\VID_04F2 & PID_B41A & REV_2960 & MI_00

  Tried:

  • Uninstall of & reinstall the driver in Device Manager
    • If I try the option "Online search", he is unable to find the driver.
  • Toshiba Web Camera Application installation [does not work either]
  • Reinstalling System Toshiba settings app.
  • Research online the ID of material for pilots.

  But it doesn't help, need me the driver files to make it work again.

  Thanks in advance for the help.

  Apparently, it was a problem with Windows, as it is fixed with the update of 1067. [Update of the birthday]

• "Plugged in, not charging" Satellite P100-286

  Hey people, well I've been having this problem just now, I have a Satellite P100-286, OS: Windows Vista Home Premium and my problem is that after I m using my laptop for a little while on the current if I am it loads, it will stop charging and if I hover over the battery icon n the taskbar It will say "Plugged In no current charging" and the battery life will not be 100%.

  I also note that in this case, the light of battery on my laptop is not blue indicating the battery is full (of course), but neither is it orange indicating that he is in charge, but a few times I noticed that the light flashes when this happens not all the time. I played games with the power adapter plugged in and sometimes the laptop is off and when I turn it back on and "resume windows" warning message will appear saying 1% etc.

  Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

  I KNOW there are a LOT to READ IM SORRY... hehe... BUT PLEASE HELP: p

  > Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

  You should know that it is not easy to provide an exactly fault diagnosis without putting his hands on her.
  What we can do is to provide some sort of suggestions

  So I think it could be a faulty battery, so first the battery should be checked.
  If problems still persist, then electronic power supply failure might be possible

  However, the equipment should be checked and this can be done by an ASP in your country
  It would be desirable to communicate with these guys and ask for help

  Good bye

• Memory card Toshiba does not on Satellite A200

  Hello.

  When I turn on my laptop (Satellite A200) often, but not every time, I get a bar at the top of the screen that reads "Toshiba Flashcards (does not". ")"

  Sometimes this can be removed by clicking on the Red Cross in the corner of the bar and after a few moments he does not disappear, but other times it stays there and there seems to be no way to get rid of him.

  Can someone help me with this problem?
  You can probably tell from what I am not a computer expert and a simple language would be most appreciated!

  Try this:

  Updated the BIOS, which can be downloaded from the Web from Toshiba site
  Uninstall the Toshiba Value Added Package
  Download and install the latest Toshiba value added together on the Toshiba site

• Keyboard/mousepad does not on Satellite 1110

  I have an old satellite 1110. It is a dual boot with linux and windows XP machine. The Boot Manager is grub.
  When I let the machine start the OS default without touching the keyboard at the stage of grub, about 70% of the time when the finishing of the machine to start the keyboard and mouse will be non-functional. However if I use the upper and down arrows to grub stage, 100% of the time to keyboard and mouse mat work correctly when the machine finishes booting.

  I'm trying to understand why this would be so. It does not seem to relate to the involved BONE, just the physical manipulation of the keyboard. Is it a bad connection due to lack of chip, bios or other software problem?

  Hello
  Are you sure that the touchpad is enabled?
  Check it by using the Fn + F9 key combination. If this combination does not work, try to find the power button function in Control Panel-> mouse control
  By the way; have you tested If reinstalling the touchpad driver could help solve this problem?

• Does not start Satellite A200 - checksum of the header file is possibly corrupted

  Does my Toshiba Satellite A200 on Vista.

  The following message appears on the screen: "the file is maybe damaged. The checksum of the file header does not match the checksum calculated.

  I tried reinstall drive, but it does not solve the problem.
  The following message is displayed: status: = xc0000428 (as well as instructions that do not seem to help at all).

  What can I do?

  Hello

  You mean that the new installation of operating system using Toshiba Recovery disk didn't?
  Hmmm, in this case, it seems like a RAM problem

  I searched a bit on the net about this error and found some info that might be linked to the faulty RAM memory.

  You should try to verify if a single one single module of RAM is affected.
  Otherwise you need to replace the two modules and then should try reinstalling the operating system.

  Welcome them

• DVD drive does not write - Satellite M40X-175

  Im having a problem with my dvd. I tried to burn my movies, music and my files on a dvdr or cdr, I tried DVD - RW and CD - RW but I do it every time gives error "d:\ is not accessible incorrect function". but when I try to watch a dvd movie or use my music cd, it does not work. He reads. Does this mean that my dvd drive cannot be read and not write?

  [Edited by: admin on 4 February 06 20:23]

  Hello

  Satellite M40X sounds new enough to have CDs of feature writing. Seems to me a HW question but you can try:
  1 - Clean the blank CD with a cloth dry
  2 - blow to the goal and do not forget that there is no dust
  3. you can uninstall the driver from
  -> Panel-> system-> hardware-> Device Manager-> DVD - RAM-> (right click) properties--> driver uninstall-> restarting your laptop.

  If they do not contribute, you can contact a Toshiba authorized Service partner. You can find the one nearest to http://217.45.123.236/toshiba/resellerselector.nsf/WebServiceProv?OpenForm

• Does not start satellite C50-A-1E2

  Hello
  When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

  Remove the battery and try to start with the power supply only.

• Recovery CD does not retrieve Satellite C660-1WN

  I ordered a set of 2 CD from Toshiba Recovery and they received yesterday in order to correct this laptop Windows depression...

  [http://www.toshibamea.com/ComputerProduct/4/Satellite_C660-1WN/49674?pageid=4]

  The problem at the beginning upward is that Windows 7 is not implemented, more that does not show the drive in the BIOS (the fact DVD player) and after the boot sequence the following message appears: Reboot and select proper boot device or insert media root in the selected boot device someone suggested the drive is broken or the cables to the same loose or lose.

  The owner said, that the error appeared after McAfee offered to "remove 15 errors found on the disk." The laptop has never been opened.

  What recovery CD 1 the sequence start starts the recovery but initially shows two pop-ups that indicate that the hard drive is not found.

  First error message - ERROR: IOCTL_DISK_GET_LENGTH_INFO. \PHYSICALDRIVE0 the device is not ready.

  Second error message says something like - there is no access on disk 0 # or the RAID configuration is not correct!

  After agreeing two messages, the guest turns the error that appears also in this thread...

  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=52088]

  .. .and stops on this line...

  System32 X:\ Windows\ >

  .. .the including recovery failed.

  I fooled with the tips in this thread...

  [http://superuser.com/questions/318322/how-do-i-fix-my-mbr-when-windows-7-system-recovery-shows-no-drive]

  .. .or there are a few commands that show the State of the disk. Using the list disk drive I can find the drive that shows however that it doesn't have a drive letter designated, where the State is without media and size values and free is of 0 bytes.

  Verify the information of partition, the partition for the the DVD (volume 1) is active and mounted and - apparently - the hard disk (volume 0) shows that there is no label, where Fs holds no information Type is listed as removable, size is 0 bytes and status without media.

  I then tried to assign the letter F on the hard drive which has not had a letter attributed to himself and who has been reported as a success, but after another reboot and trying to run the recovery cd, even for the first method distributed everywhere with the drive not showing...

  Post edited by: safesite

  If I understand your posting right, THAT HDD is troublemaker, so I think you should get it again or another HARD drive, set the BIOS to the default settings and try reinstalling the recovery image.

  If possible, do this and post the results.

• Wireless does not work - Satellite A300 model PSAGCA

  Hello

  My built-in wireless does not work on my laptop. I called the customer service line, his fees to fix the problem but to no avail. Now, I have to use the wireless adapter to use internet which is not the way I wanted to. Can someone help me please how to do my job with built-in wireless?

  Thank you

  adoolan

  + The message was edited: model number added to the object.

  Hello

  Please tell us which laptop model you have and what operating system is preinstalled.

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Screen does not work, Satellite A100-632

  Dear guy who read this,

  After using my laptop for more information, then at 1 year, my screen today simply stopped working. Windows everything works fine, I can connect to the computer very well, but I don't see anything because the screen is black.

  Vista login screen I get the screen to work by pressing the FN and F5 several times, then it works. But it does not fill the screen, after I enterd my password it windows finally meet my full screen.

  You're probably thinking; how fixed you the problem right?

  Good for evil, no.. Because I have to do this every time I restart the laptop, and I can't get into the bios (so I can't uninstall windows if his bankruptcy, for example) and I want to leave my laptop works properly and I'm the only one in my house who knows how it works, and I'm not the only user...

  Sorry for my bad English, I hope you guys can understand the problem and fix it for me.

  Hello!

  Not sure about your problem. My A100 runs on Windows XP Home edition, so... But I think that, as you can see sth on the screen, it must have sth to do with software, like bios, drivers, OS. Why not try to reinstall Vista, download the latest version of the bios? You say that you are not in the bios, but maybe you don't need? I think that when you insert the Vista CD, it should automatically start the program. If you still don't see it, try borrowing an external monitor and connect it to your laptop. Maybe this would help somehow.

  My guess, some of the many users did sth bad :-). My mother-in-law never ceases to amaze me with his computer problems. Sometimes I don't know even how she was able to have done this to his new PC :-).

  Good luck!

• Games - COULD NOT OPEN DISPLAY does not load satellite 1110-z14

  I have a Satellite 1110-z14 (old I know!) and I had no difficulty in playing games in the past.
  But recently my laptop will not load games (except those in line) and a message that says: ERROR COULDN'T OPEN DISPLAY, appears.

  My laptop is now discontinued and I have trouble finding information on what could be the problem...

  Help, please!

  You goggle for this error message: ERROR COULD NOT OPEN DISPLAY

  I did it and it seems that this error message appears if you cannot connect to game servers.
  Sorry, I m unaware of this, but in my opinion, the problem is a gesture of challenge related to the online game.