S10e, screen did not seem to turn on? sleep?

Similar Questions

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• WiFi did not go down turn even in airplane mode... !!

  WiFi is automatically turn on and unable to turn it off by switch even... When I turn on the wifi of flight mode gets turn one after a few seconds and turns off mode... its not even down I press the swith...

  Hello again Big_Bug,

  I have another driver for you try for your computer. This driver is the Button Driver from HP wireless for your computer. Please install it and see if your able to turn your wireless network works correctly.

  Thanks for posting again on the HP Forums. Have a great day!

• LR6 downloaded/installed but does not open.  Help screens did not help.

  I'm logged into my creative cloud account.  I downloaded and installed the new LR upgrade, but it will not open using methods in the help.  I tried a reboot, no joy.  I still installed LR5 but I don't want to try to withdraw unless I can get LR6 to open.  Hope you can help with this.  Respectfully, Duncan

  signing of CC has solved the problem.  After disconnecting, locatred I the

  new downloaded/installed LR-2015 in my apps folder and launched from there.

  has worked well.  My LR5 is still there for now also.

• mode full screen did not work! Firefox v50.0

  When I'm in full mode scren, windows taskbar no longer hidden. :\

  I think that distabling and allow the modules and restart several times Firefox should work.

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.

• HPStream x 360 ConvertiblePC 11: touch screen does not work after update of Windows 10

  I updated my computer to Windows 10 but the touch screen no longer works. I've updated the drivers, but there has been no change. Any suggestions?

  Amazing! Problem solved!

  I heard there was a reset function in Windows 10 but I really didn't think he would do anything. The touch screen did not work when I originally did a new install of Windows 10 so why would it now? But he did. My touch screen works well and even better, he deleted loads of disk space.

  To simply type "reset" in the search and recovery option returns to the update & security. 'Start' this PC with Reset and select this option to remove all. After about an hour or two, my computer was fully functional. The downside was having to reinstall applications and files, but is not a major concern.

  Result!

• DELL C2665dnf - the touch screen does not

  Little more than a year from the model already replaced is not the first time under warranty.

  Can no longer use the touchscreen. No crack, no damage, peripheral is covered on every night when not in use.

  Dell technical support were without help, absolutely no idea on the machine. After 10 minutes he asked that the device look like really! Much like our dell above us support response referring to the manual which does not cover our problem.

  Has tried for 2 hours to explain the technical assistance that the touch screen did not work, but he insisted, I tried printing from different computers, reinstall the drivers, try different network cables, reset.

  At the end that I hung up in frustration, because he just couldn't understand, there was a touch screen.

  My only job around our dud machines is to install Dell Document Hub and control everything from your desktop. It's the only way I can scan now. Not sure about fax I do not use this feature.

  We are a company who buys are more products dell.

  Currently working on what HP computer I should buy to replace because I had nothing other than proactive tech support of HP.

  Hi sarakus,

  Please repost this in our customer care Forum. They may be able to help.

  http://en.community.Dell.com/support-forums/customercare/

• Loading screen does not accept animated GIFs?

  Hello world.

  My captivate 3 projects use the loading of the company logo.

  The problem: the company logo is animated, and the Captivate 3 loading screen does not seem to allow for an animated loading screen.  A static image of the company logo is displayed instead.  This tends to give the impression that a project of loading froze and it aggrivates customers.  Does anyone know how to display the logo of aniamted together?

  Hello

  Try this if it can help you by adding the Logo of your company.

  Open a small project (100 PX by 100 PX) and follow the Insert > Animation.

  Select the Animated Logo company. The Animation is added on stage.

  For best results you can run a loop of animation (Animation properties, tab Options-animation select loop) - this step is optional

  Edit > Preferences > start and end - uncheck the "loading screen".

  Also follow project > skin and uncheck the 'Playback control' and 'borders '.

  Publish the project to Flash (swf). A little Swf of your Logo is now available.

  In your project, under the loading screen options, select the Swf file created. Now, the loading screen can play Logo of your company.

  -Ashwin

• Portege Z20t-C-121 screen does not automatically turn into tablet mode

  Hello

  We bought a Portege Z20t-C-121 to test as a replacement for some of our leaders. I have built with Windows 10 company and installed all the drivers latest on the Toshiba site. A WiFi Intel driver did not work properly so I downloaded and installed from the Intel Web site.

  The only thing that I can't work seems to be the automatic rotation of the screen; When I dock the screen to use as a Windows Tablet detects this and goes into tablet mode, but however I turn the screen remains in the same landscape as it was when it was docked.

  Name of the operating system: Microsoft Windows Enterprise 10
  OS version: 10.0.10586 n/a build 10586

  Can someone tell me what I need to do to get this feature works please?

  Have you installed the drivers Win8 or Win10?

  Have you installed the driver system of Toshiba and Toshiba system settings?

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Satellite A300D-1EI - error blue screen display - drivers did not have

  I bought my laptop about a month ago.
  Everything is working great except two errors 'blue screen' caused by the graphics card.

  Both were when the laptop was connected to the TV via the S-video port.
  First was when the computer screen turns off after 15 minutes while watching a movie on resume says that the display drivers did not have, and then I got the blue screen. Then I updated the site Web of ATI display drivers and set the computer screen goes out.

  All were ok with no problems, until last night when I got another message that the display drivers did not follow a blue screen.

  I wonder if this is problem to drive or there is a problem with my graphics card.

  System information:
  Processor: Intel Core 2 Duo T8400 CPU @ 2.26 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit Windows Vista Edition Home Premium
  Graphics card: ATI Mobility Radeon HD 3470

  If long you use ATI driver ATI support page it is not possible to say anything on this subject.
  This driver is not tested and Toshiba does not offer any help on this matter.

  So what you can do is to install OS using recovery media and see what will happen in the future. Please test extensively with the own operating system preinstalled. Do not install anything that can have some negative influence this game or additional applications, codecs or something similar.

  Test it please and tell us if the problem persists.

  When you want to watch movies on television in the first passage to the TV and then start the DVD player.

• Screen black-startup - Message tells me that the machine did not start successfully

  After installing the updates of a security xp on August 23, 2011 my computer starts with the windows logo then goes to a black screen.  I have to turn off the computer.  Then, it will come with the message that the machine did not start successfully and it gives me options.  I started upward with the last known settings that worked.  However when I turned off the computer again it goes back to the black screen.  Help, please.

  Hello

  First, we will start by doing a clean boot. http://support.Microsoft.com/kb/310353

  Please click on this link and follow the instructions. This will help solve the problem and what is the cause behinf the mistake of starting.

  I hope this helps. Just reply to the results.