S205 RAM/memory Test

Similar Questions

• IdeaPad S205 RAM/memory: maximum speed?

  Hello

  Lenovo customer service/tech support I asked this question several times, each to give me an answer to 1066 mhz.

  What is the maximum SPEED for the RAM/memory usable by the S205 with AMD Fusion the E450 processor?

  I understand 8G (2 slots of 4G) is the maximum capacity of ram.

  But what is the maximum speed of the ram? I thought that the maximum allowance is 1 066 mhz due to the site, despite the AMD website, saying that the E450 can manage 1333 mhz.

  Obviously, I want to max out my RAM. I went on the site of Kingston and used the option to locate specific RAM for this device and it gave rise to 1 066 mhz 2X4G sticks. So I bought and it just. I just want to come here and see if someone actually KNOWS what as the maximum speed capability (or anything else I should be aware of outside Gig capacity) which can take the S205 with AMD Fusion the E450.

  EDIT:
  In new research, I found the following.

  (1) according to the support of crucial technology, the RAM frequency/speed is controlled by the processor CPU only. And as said by him, the AMD 300 and 350 have a maximum speed of control for the RAM of 1066 mhz. However the E450 has a 'controller memory integrated (up to 1333 MHz) DDR3"as seen go ( http://www.lenovo.com/shop/americas/content/pdf/system_data/s205_tech_specs.pdf ).

  Also note that just below him, he goes on to say that the maximum speed for RAM is at 1066 mhz. Therefore, this disturbs more the issue. It seems to me that, when they are max memory capacity and speed, they forgot that the E450 can manage more of the E300 and E350 and simply serve their maximum speed of 1066.

  I already went ahead and bought 2X4G 1066 RAM. Fortunately, I did not open them. But now it comes to ship to the company and having to order the good 1333 mhz RAM. Otherwise I use RAM that is slower than my full potential.

  I advanced and called Lenovo and it brought to their attention. After the daughter of back and forth between 1066 and 1333, she decided at the end (of course assistance from their technical support level 2) 1333 is maximum for E450.

  Conclusion:
  It seems that if you have E450, you may have to 1333.

  If you have E300 or 350, you can have 1066.

  If anyone has confirmation, please tell.

  If you go to the Lenovo support site and enter the serial number of your S205, if will give you a list of all the machine components (including the RAM module manufacturer, size, speed, etc.).

  The manual indicates that the specification of RAM for my S205 1066.  By entering my serial number, I found that Lenovo had actually installed 1333 RAM in my system.  Then, when I added more RAM, I knew to add 1333 instead of 1066.

  No, I didn't bother to check my actual speed of the RAM.

• Memory test failed w / Kingston 4 GB

  I have a HP G42 - 461LA Notebook PC, and I added a 4 GB Kingston Ram memory (KVR1333D3S9 / 4g). I started to notice my laptop has been slow and has decided to conduct a Test of memory of the HP Diagnostic tools (F2).

  It fails with this failure ID: U3439W-5HW70M-XD002K-40HU03

  When I removed the memory stick and tried again he passed successfully.

  The strange thing is that when it is installed it is recognized and it seems like it should work, but it is slow at the opening in a few tabs in the browser (most audio glitches), and the test fails.

  Hello

  ID failure indicates that there is a problem with a memory, and must be replaced. This should be the cause of the issue of the slow-running also.

  

  I suppose that there are two locations of memory for your computer.

  You can try a memory at once and run the test or check the performance of the computer with a memory. Then, you will be able to isolate the faulty memory.

  Sometimes it might be also the memory slot... so try a memory at a time in each slot in interchanging the. That will help you know if there is a problem with one of the slot.

  You can refer to this link...

  The upgrade (RAM RAM)

  I hope this helps...

• Test at startup "memory Test: FAILED.

  Hello

  HP ENVY Notebook PC m6

  64-bit Windows 8

  8 GB of RAM (2 x 4 GB)

  I got a lot of blue screen errors so I made a diagnosis of start-up perform F2 at startup of the system and that's what I found:

  Test at startup

  Processor Check: PAST

  Memory test: FAILED

  Starting test: FAILED

  Failure ID: U08K9R-6AE6S3-XD7X1F - 407 X 03

  Product: C2C18EA #ABU
  Memory module

  Any suggestions?

  Thanks in advance.

  Hello Rahat,

  Start diagnostics is buit to check if there is hardware with computer problems.  He has failed the test of memory which means that one of the memory on the computer module has failed and must be replaced.

  If the computer is under warranty, I suggest you come in contact with HP Service Center and solve this problem.

  Concerning

  MathewT

• Pavillion G6-1240sa: G6-1240sa Pavillion: BSOD repetition and memory test failed

  Hello

  I get errors blue screen on my G6-1240sa laptop running Windows 7 (64-bit).

  SYSTEM_SERVICE_EXCEPTION

  Technical information:

  STOP: 0X0000003B (0XFFFFF80002F2D15F, 0XFFFFF880078CCB50, 0X00000000C0000005, 0 X 0000000000000000)

  I made Diagnostics, accessed through the F2 key on startup and make me

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MQ-MFPV4K-405503

  Product ID: A3S574EA #ABU

  Memory module

  I removed the laptop 2 GB module, a 4 GB module is also present. After re - run the test, I got:

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MR-MFPV4K - 405M 03

  Can someone help me with this?

  Thank you

  Hello

  Remove a RAM and run a test at the same time, if the test fails on both the RAM. You will need to replace both. If this is not the case, replace the one that fails the tests of RAM.

• Memory test tool

  Using my Vista 64-bit dvd recovery tools section I ran the test of memory. When the computer reboots, it went through the test, but at the end it starts just the test everywhere after the third time I restarted the pc, he went to the same point and started again the memory test, I checked the settings and the memory test is configured to only run two times but he wears only whenever he finnishes it again. Can someone tell me how to stop it?

  Hello
   
  Have you successfully completed the diagnostic test memory over WinRE (Windows Recovery Environment)?
  What was the result of the analysis?
   
  Start the scan memory as an administrator.
  1. click on start, type memory diagnostics tool in the search for text box, right-click on it and click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on restart now and check for problems or check the problems the next time I start my computer.
   
  Understand the results of the Diagnostic tool memory:
  If memory diagnostics tool ends the first pass and no error, your RAM is working no doubt. You can still run the diagnostic tool memory several times using the same settings to ensure that the Diagnostic tool memory cannot find any errors with your RAM. If you want to test your RAM more completely, you can run the test suite expanded by pressing T during the Memory Diagnostic tool is running. You should run for several hours and then Memory Diagnostic tool. Also, if you change the sequence of tests or one of the parameters of the Memory Diagnostic tool, the current test pass restarts.
   
  If the Memory Diagnostics tool detects errors that occur in your RAM, the screen is updated with information about the error. A "Fail" result for a test indicates this particular test has detected an error. If a test fails, your computer has for lack of material.
   
  If the memory diagnostics tool detects errors in your hardware, you must correct the errors and rerun the Diagnostic tool memory until no errors are reported. Then, you try to run Windows again. If you do not, it may be that Windows does not work properly.
   
  You can try to identify individuals without component of memory. However, if errors are found and that your computer is under warranty, we recommend that you contact the manufacturer for troubleshooting.
   
  Memory diagnostic tool information: http://windows.microsoft.com/en-us/windows-vista/How-do-I-know-if-my-computer-has-a-memory-problem
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• (Redirected) Impossible to pass the memory Test

  Hi, mine is an inspiron dell 5720 17r, 8 GB of ram, hard drive 1 TB and for 15 days it showed lots of bsod (similar to unexpected kernel mode trap, etc. memory management error), Hangman, lapi fuzzy screen and freezed until I manually poweroff.

  Now, when I tried starting diagnosis, mine all tests except some memoy tests. During a memory test, the screen became fuzzy and suspended manually for a long time until I poweroff. Sometimes, it makes beeps too, after a while, it starts as it is. What it means? My hard drive should be replaced or it is possible that they are misplaced.

  Help will be great, pls response asap, thnx in advance

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Replace the RAM memory on TOSHIBA NB510

  Hello

  I just bought a Toshiba NB 510 - 10 d and I just can't find where should I change the RAM memory.

  Can someone help me?

  Thank you!

  Hello

  I found beautiful film from YouTube how to replace the RAM for Toshiba NB500, NB520, NB550D series
  http://www.YouTube.com/watch?v=6mnQQbladnA

  Select this check box.
  Remove the plastic cover at the bottom of the unit you will see the HARD disk and the memory modules. Spread the latches to lock two memory so that the module memory will appear. Pull the module from memory, and on an angle, using care not to touch the connectors. Remove the memory module.

  All that s.

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K

• G6 Pavilion: Pavilion G6 Memory Test failed

  Memory test failure 90fd7h-5nr82m-mfgh5f-402803

  Product ID: LW350ua #aba

  Any ideas on how to fix?

  Thank you!

  Hello
  
  Replace the memory module.
  
  Contact HP with the failure code. They will do it for free if you are under warranty.
  
  If not, get a 4 GB key with exactly the same configuration, speed, etc. as shown in the manual. Crucial, Kingston are good brands that have their own online scanner, which contains the list guaranteed compatible sticks.
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c02829479
  
  Concerning
  
  Visruth

• Increase the RAM memory

  Hi all... I use hp envy 4 1201tx ultrabook. I plan to upgrade my RAM memory. I have 4 gigs of RAM with maximum possible memory to 16 gigs. Can I contact HP for the upgrade. Still on warranty.

  "This computer has no parts replaceable by the user. HP only providers allowed. »

  You can contact Service Center authorized HP and arrange to send in the upgrade. You may also have done by an HP authorized service provider.

  The phone supports up to 16 GB.

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• How to free up RAM memory in my macbook pro

  Hello

  How to free up RAM memory in my macbook pro

  In the current Mac OS x versions, Apple realized that the FREE RAM is not useful for anything whatsoever. What is needed is "instantly available RAM", and they began to be implemented in a number of ways. Free-ing RAM is no longer applicable.

  Some of your RAM may be used by an element called cache. These are copies of files read previously, in the hope that you will need to see again them soon. This RAM is said to be immediately available when an Application makes a request for the new RAM. In addition, little RAM is compressed. If it is referenced, Mac OS X can decompress a lot faster than to a new reading of the disc.

  The important point to look at the activity monitor is graphics memory. If it is not green, you may have to look more carefully at how you use your Mac and its RAM. The telltale signs that you need more are using PageOuts or Swap (but these counters start at zero at the start, so if you have worked for days, some will have invariably been used).

• RAM memory

  Hello, I have the HP Pavilion dv6000 and my laptop has 3 GB of ram merory (2 GB + 1 GB), I want to replace my ram memory

  (1 GB) with memory G.skill  F2 - 5300CL5S - 2GBSK SO DIMM DDR2 667 mHz CL5... is this possible?

  Thank you

  Your model can accept 4 gigabytes of RAM. Yes the G.Skill will probably work, but you'd be 100% sure if you have tried to find another 2 gig module, like the one already in it.

• The memory test: FAILURE (tune-up system) for a Pavilion dv7-4031TX

  Hello

  If someone knows how to fix the memory issue?

  I get an error message when I run a memory test by using the program of development of the hp system. I can't be too sure how long I've had this problem because it is the first time that I tested the factory equipt 8 GB memory.

  That said, I have recently updated my Bios F.29 in an effort to tuneup the hp and hopefully reduce the boot by a little time. The installation went well but I now wonder if there could be some sort of conflict between memory and Bios firmware? Any thoughts?

  Concerning
  Peter

  Hi Peter,.

  Try the following.

  Stop the laptop, unplug the AC adapter and remove the battery.

  Press and hold the power button for 10 seconds.

  Then remove and reposition your memory - the procedure is detailed on Page 72 of your & Maintenance Guide.

  Once completed, replace covers, etc..., reinsert the battery and plug in the AC adapter.

  Run the memory diagnostic again.

  Kind regards

  DP - K