S5-1414 usb controller

I bought a s5-1414 refurbd without an operating system. I installed Win 7 Ultimate and everything works perfectly except that it has need of a usb controller is installed. someone has any suggestions where to find one?

Well, you bought a machine to run Windows 8. HP has no support for Windows 7 drivers for this particular model. You could always ask to Foxconn (the mobo mfg) but I doubt that you will come with anything.

According to another thread with similar issues looking for a USB controller, it was recommended to try a computer different model that has the same motherboard as yours, but uses the W7 OS and install the drivers to whom.

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5231538#N189

For me, it looks like your only alternative but someone there may know another source. Let me know if you try it and if it works.

Tags: HP Desktops

Similar Questions

  • Wich USB 3.0 / 3.1 PCMCIA USB controller works best in a macbook pro 17 "early 2011?

    Hi people,

    why I had this idea before?

    I have an available PCMCIA slot in my macbook pro and would therefore be an opportunity to put in a USB 3.0 or (if already available) a 3.1 USB controller card.

    ... but: one who works best with EL CAPITAN? and with the SIERRA to come?

    did someone knows with this interesting topic?

    This product solves the problem:

    I bought a controller card - 3.0 - nano tech on eBay: http://www.ebay.de/itm/262393441049

    It works very well plug & play under sierra on a macbook pro in early 2011.

    but nowhere, a controller 3.1 must be found.

    Welcome, flo

  • Win 7 USB controller driver for Pavilion 500 - 217

    Hello, I recently spent again PC of my mother to win 8 for Win 7 64 bit. I can't either driver (Intel or AMD) crystallized under drivers available for the controller USB to work. The hardware ID is PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03. I also need a driver for the SM Bus controller unless the driver of the usb controller works for both.

    I should be grateful if you would help.

    Thank you...

    Hello:

    Install the AMD Chipset Driver and restart.  You want to download the chipset 49.7 MB file.

    Who should install the two devices.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    If it does not install the USB 3 controllers, please install both of these drivers.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • P5P88EA: USB controller drivers

    Hello, I bought a HP Pavilion Notebook two days ago and after I installed Windows 7 Ultimate 64-bit I downloaded the HP support assistant. He succeeded wonderfully, my drivers except the USB controller, it has no and can not find drivers, Internet has failed me and my computer does not recognize the USB devices attached to it. My Pavilion is a:

    HP Pavilion Notebook - 15-ab206nu

    Hello

    For the usb 3.0 controller, try the following driver.

    http://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74160.exe

    The unknown device is HP 3D DriveGuard.

    http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

    Kind regards

    DP - K

  • Drivers Windows 7 USB Controller

    Recently, I went down my HP Pavilion TouchSmart 11-e015dx notebook from Windows 8 for Windows 7. Only Windows 8 drivers are listed on the support page, but they seemed all to install and works great. The only problem is that my right two USB 2.0 ports do not work after Windows loads to the top. It is not all the drivers on the support and Windows Update page cannot find them, nor can many programs update driver - it is just seen as a Serial Bus controller universal (USB) unknown in Device Manager.

    Any idea where I might be able to get these drivers?

    Hello:

    Please download and install the driver from the chipset AMD and restart.  The first file listed.

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

    On some of these very new PC, AMD USB controller drivers install automatically for one reason or another.

    If this happens, please read my solution and workaround for NAP_CHL_IT on the link below and try these two.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/driver-for-HP-M6-k010dx-for-ACPI-HPQ6007-on-Windows-7/m-p/2891907#M145254

  • SP A10 and USB controller drivers

    I have a satellite pro A10 and cannot find the driver for the USB controller that is no longer available in toshiba online downloads. How can I get the driver that is not provided in the driver CD?

    Hello

    "normally you don't need a USB driver. The USB driver is part of XP and is installed by it! If it does not, you can uninstall the USB port in the Device Manager and the operating system reinstall the next time you start upward!

    Good bye

  • HP Pavilion dv6-7010us laptop PC USB controller driver

    Hi, I did a clean install of windows 7 HP and I can not find the driver for the USB controller. Thanks for the help

    Hello:

    Download and install the drivers for the chipset amd from the link below.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • dirver USB controller for HP 15-d024se for windows 7 64 bit

    I couldn't find the dirver for usb controller for HP 15-d024se for windows 7 64 bit, please help

    Hello

    Please try Driver Intel Management Engine Interface (MEI)

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64344.exe

    and Intel Chipset Driver and Utility Installation:

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64343.exe

    Reboot and try Intel USB 3.0 host controller driver

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64706.exe

    Kind regards.

  • Satellite A30: HARD drive, modem and USB controller

    Hi, I have problems with my laptop A30. The HARD drive looks like it will fail (bad sectors) utility that I downloaded on the Hitachi site tells me that it is a hardware failure.

    I am also unable to use my modem that I also get a "cannot open port ' error even if everything looks fine in Device Manager and I have a problem with a USB controller that is apparently not entirely installed but I can not find the drivers for it!

    I am not a happy customer of Toshiba and it seems that there is a general failure with these the 30 GB Hitachi hard drives!

    Retro Hi,

    Maybe not much consolation, but my original 30 GB hard drive has been replaced after only 6 weeks of use. The replacement lasted 8 weeks and the third disc rotate a little better at 16 weeks. Readers were a mixture of Toshiba and Hitachi drives. After the failure of the third car, I decided to buy a bigger HDD (80 GB) and install it myself rather than lose the laptop for another two weeks so that it has been repaired. Then, I bought a new smaller HARD drive that I have installed in an external enclosure (USB) which I use now for regular backups of entire system weekly.

    The HARD drive inside my A30 notebook on the right side directly on the optical drive, and there was a noticeable temperature increase when I work with the optical drive. I have a theory for pets, this increase in heat may adversely affect the HARD drive at times.

    The last drive (a Toshiba MK8025GAS) is in place for 7 months but Norton Ghost has recently begun to report bad sectors so it looks like a new drive could soon be made to order.

  • problem with driver usb controller pavilion g7

    I need driver usb controller pavilion laptop g7

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

    Hello:

    You must install the AMD chipset driver and reboot.

    You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  • Want to Phoenix 810-160: USB controller driver

    I need the driver for the USB controller to a Phoenix 810-160 desire. the system motherboard is a worm MS-7826 1.0, the device in the "other devices" section manager said there is no driver installed.  I tried all the usual bugs, uninstall it, restart, update driver etc. nothing works.  Working USB 2.0 ports 3.0 ports do recognize not all devices, but they will slow down load a cell phone when it is connected so that they get the power. Thanks for the help

    Hello, go to http://support.hp.com/us-en/drivers/selfservice/hp-envy-phoenix-810-100-desktop-pc-series/5399342/model/6529902

    Download USB Intel under section (sp65142) Chipset host controller driver and install.

    If it does not please post since the Device Manager hardware ID to find the suitable driver for you.

  • "Unknown device" USB Barcode scanner, problem with the USB controller driver?

    Hello

    I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

    The brand and model of the bar code scanner is:

    Datalogic Heron D130 USB.

    When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

    Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

    It works fine until you restart the computer.

    After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

    I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

    I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

    Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

    I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

    in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

    I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

    Bought more than 40 computers that I have this problem.

    These were bought at different times with two different for suppliers

    Computer model are the following

    HP ProDesk 1 400 P/N5S21EA

    Specifikations:

    http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

    Does anyone have an idea what could be wrong and how to fix it?

    Thanks in advance

    Sincerely

    Robert T

    Hello

    The problem is not power - related.

    We use passive USB hubs that solves the problemon these computers.

    (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

    The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

    When you let another usb-controller support in handshakeing (such as a usb hub), it works.

    Datalogic or Intel would like to acknowledge this error.

    Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

    We get more performance for your money when AMD is usually less expensive to purchase.

    And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

    I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

  • Tecra M2 yellow exclamation - system basis, ethernet, and USB controller

    Hi all.

    SORRY FOR THE LONG TEXT TRYING TO ACE GIVE MUCH INFORMATION AS POSSIBLE.
    I have a Tecra m2 Details: -.
    PTM20E-4MP1D-FR
    NO. 74631791 G SERIES
    OTHER NUMBERS:-PM715/256 / 40 G 42/14XT/D/LM/W.
    SINGLE UNIT CHANGE IS THE HARD DISK OF 40 GB ON EBAY WITH WINDOWS 2000 SERVICE PACK 3 INSTALLED.

    I have checked these forums and I would like to give a big thanks to Jack Black, who advised a link to download Intel Wlan page, this solved my problem-driver Wlan driver was NOT available in the toshiba download page. I REQUIRED the PRO2000 INTEL "DRIVER XP 32 / 2000. Thank you once again, Jack.

    I have a problem with the Base system, Usb controller and Ethernet controller, although the USB devices on the right side of the unit work. These items are listed in the other devices category in Device Manager with the black-yellow exclamation next to them.

    I worked my way through all the LAN DRIVERS from the toshiba download page, can't installed ethernet.
    Similarly, the base system - I tried sd card download (suggested to this support page) and other downloads.
    Nobody knows for certain what the base system is?
    ANYONE KNOW WHAT DRIVERS I NEED OR WHERE TO GET THEM?

    haven't looked at the usb part again as I try to run internet facilities and you need fixed ethernet controller.
    I looked at the guide suggested to install the drivers, but only after I had tried to disentangle the display and utilities toshiba sound etc.
    An OTHER devices I have work at the INFRA RED using the driver - smc - fast irc or similar fom toshiba page.

    A BIG thank you to those who have read this maybe very far, the foregoing will help someone else.

    Win XP is known as the Microsoft operating system better personally I prefer Win XP. But finally it s your own decision that you want to use.

  • USB controller does not

    HP Pavilion Elite HPE-420nl

    Windows 7 64 bit

    Today I installed a clean Win 7 on my new SSD and averything works well except my USB3.0 ports.

    When I go on the USB controller, I see a warning that no drivers are installed. I have no idea where to find them.

    I can give you the hardware id:

    PCI\VEN_1033 & DEV_0194 & SUBSYS_80051B5B & REV_03
    PCI\VEN_1033 & DEV_0194 & SUBSYS_80051B5B
    PCI\VEN_1033 & DEV_0194 & CC_0C0330
    PCI\VEN_1033 & DEV_0194 & CC_0C03

    Thanks in advance!

    Hello

    Try to download and install the host controller driver Renesas 3.0 on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53291.exe

    Kind regards

    DP - K

  • Need for Satellite A60 USB controller driver

    Hello

    This is my first time here, so please forgive if I look 'amateur' :)

    I had to reformat my pc and had a hard time finding drivers.

    * I need still a usb controller driver * (code 28 in my device - do not installed Manager!). I'm looking for 2 days now and can't seem to find someone who works.

    The funniest is that one of my works of ports usb (the one on the right side), but do not have the other 2 in the back.

    Anyboday can help me please?

    Thanks a bunch

    DEA

    Well, there are no special USB drivers.
    USB drivers are part of the Microsoft Windows operating system.

    You must install Microsoft service pack 2 and should update the XP in the current state.

    Best regards

Maybe you are looking for

  • New iMac with overheating problems

    Hello For a long time Mac user in time! The Macintosh Plus 1986 to new owner of an iMac 27 "i7. I had a number of different Mac. Why my iMac can operate at a reasonable temperature? They are aways running with all the programs that are all turned off

  • Tecra A7 PTA71E - Win XP BSOD

    Hello Since 2007, I have my Tecra. I bought it with win XP. Until the middle of 2011 OS works OK, but not later. When I turned toward the top of the computer, it starts and when the Office was running, I just started with the trackpad or USB mouse on

  • White screen on Satellite 1110-Z15

    Hello My Satellite 1110 is great until last night. I updated my Norton Antivirus and ran a scan. When she had finished I turned it off. Today, when he starts towards the top of the screen is totally blank. I can tell by the lights and the noise that

  • 0X800106ba

    I had a problem with my windows defender, I can't scan my pc with the Defender someone don't miss to use with my windows defender... can help me please on the solution... ?

  • Outlook express/sending messages

    Why doesO/E want to send messages via Tiscali when the account is no longer active. This only happens when I try to send an email with the items I scanned of my printer. Yahoo is my default account. Tiscali was an old VAC defect.