S5000-204 W/WinXPPro is not resumed from sleep mode

Similar Questions

• Pavilion g6-1d21dx: long time driver or BIOS on Pavilion g6-1d21dx number may not resume from sleep mode or Hibernate mode

  When my g6-1d21dx Pavilion was still fairly new, Windows 7 has started to hang whenever I tried to resume from standby or hibernation, and I couldn't get back to work until I held the power button down to force the computer to restart.

  Now, I did a clean install of Windows 32-bit 10, and everything works fine, except for - big surprise - repeated from the previous day and hibernation. Windows 10 adds quick start to the mixture, which also does not work properly, probably because it's a similar feature.

  HP already explained the cause of this problem, or provided a fix? The BIOS I have is F.49, but the projection of BIOS newer on the product page is a F.48. Maybe I need to reduce my BIOS? I saw a post where someone has talked to return to F.46 to fix very similar if not same problem on another model of Pavilion g6. In any case, anyone who is familiar with this issue?

  More details:

  If the quick start is activated, whenever I put him computer have a BSOD and reboot. Usually, the error is unexpected_store_exception but I also had kernel_data_inpage_error a couple of times. The computer appears in the standby mode and Hibernate successfully, but when I try to resume it turns his wheels for a little while and then just restarts, usually without error message. For the moment, I have quick start disabled and sleep and Hibernate in my power options.

  Thanks for any relevant information.

  The solution for me was to install F.46 revision of the BIOS. I got F.49, and the latest version available on the support site is a F.48. I don't know if there is a downside to this...

• x 220 does not resume from sleep mode

  A few questions posted here look identical, but I did find something similar.

  About 10% of the time, the machine does not sleep.  When you open the cover, the power led Nightlight INDIGLO®, caps lock light, LED, mic mute light and light through a Flash every seven seconds or more.  No messages appear on the screen.  By pressing the power button does nothing.  After a forced shutdown (power longpress button), and then pressing the power button a times, I gives me the message on windows does not shut down properly with the choice to start in safe mode.

  I'm not sure of the cause... I've updated everything that I can think of, but the problem persists (on an irregular basis).  The battery is too loose in the slot?  A jiggling of the batterery during sleep will cause an abnormal termination?

  Name of the operating system Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  INTEL CORE I5 - 2520M PROC SBB
  System model 4286CTO
  System Type x 64-based PC
  Processor Intel (r) Core i5 - 2520M 2.50 GHz, 2501 MHz, 2 Lossnay, 4 logical processors
  Version of the BIOS/Date LENOVO 8DET54WW (1.24), 18/10/2011
  SMBIOS Version 2.6

  This issue is NOT resolved.  I'll update the changes in the comments below.

  If there is a green box below this post that says 'resolved', please ignore.

  
  

• Tecra M5 does not return from sleep mode

  Sometimes my Tecra M5 won't wake up from sleep mode.
  The LCD does not turn, and hard drive works only for a second.
  I have for it to turn by pressing the power button / stop for a long time and then run again without my work that has not been saved.

  Other times I'm having problems with turning it off. Wondows disconnects and the PC is pending for a long time with LCD on - logging off XP screen.

  I have instaled videoprt.sys update and the latest BIOS 1.60

  Thanks for help.

  Hello

  I'm don't know if this will help, but try to install Microsoft Windows XP KB917332. You can find it on http://www.laptopvideo2go.com/drivers/ms_kbs/

  Please report the results!
  Good luck!

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

  My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

  2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

  2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  Any help would be great!

  Hi Esque,

  Thank you for the information.

  Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

  If the problem persists, suggestions, please follow the link above and let us know the results.

• Windows 7 not waking from sleep mode

  Hello

  Lately, my DELL Inspiron 580 (Windows Home Basic) caused problems when I try to take out the "sleep mode".

  The symptoms are:

  * Moving the mouse, the LED monitor and Tower remain 'orange '.

  * When I press a key on the keyboard, the Tower starts to emit a higher than normal Purring noise level, it seems to be the fan, but I'm not sure. Monitor LED lights too but shortly after, the monitor switches to "energy saving" mode and doesn't. The Tower continues to emit "fan noise" and its LED remains white, but it does not start, or so it seems that the monitor remains dark.

  * In this State, if the Menu button on the Dell monitor is presses pressed, it flashes a message indicating that no signals are received from the PC.

  * If I turn off the Tower, the Tower power button, and try a bit later, the PC starts, but after a few attempts.

  I would be grateful to receive advice and suggestions.

  Aksa8

  Hello Aksa,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Powers are damaged or incorrect.
  -BIOS reduces power to the port to which the input device is connected.
  -Point keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  The problems of wake the computer from sleep mode
  http://Support2.Microsoft.com/kb/266283

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Information with dubbing:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• Vista will not wake from sleep mode

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  Have you tried...
  Start button > Control Panel > Classic view > Power Options > go to Plan you selected, click on change plan settings > click on change advanced power settings > on this new window, use the cursor, scroll down to multimedia settings, then click on the + sign in front of him. Click on the + sign in front when sharing media > change BOTH the "on battery" and "Plug-in" allow the computer to sleep. > click OK

  Now see if the computer will go to sleep mode.

  t-4-2

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

• No backlight on Resume from sleep mode - toggle and backlight power lights. dv6t laptop, Windows 7

  dv6t notebook with screen high resolution, Windows 7.

  Backlight is still OK with start or restart. Often back-light does not illuminate when the lid open to exit the mode standby (power settings are at default recommended HP). All the other lights or indicators are normal. Press the power button (go to standby mode) and press new (return of Eve) and backlight turns on. It still works. No other problems. Thanks for your help.

  Download the latest updated Bios for your model specific from here.

  The update of the Bios?

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything thereon.

  Note:

  The update of the BIOS is always risky If you do this a t your own risk.

• L50D-B satellite will not wake from sleep mode

  My satellite L50D-B - 16 Q won't get out of the way 'sleep'.
  When I turn on the power button so the NUMLOCK and CAPS LOCK light

  Hello

  How about this solution:

  • Disconnect the power adapter
  • Remove the main battery
  • Power button press and hold 30-40 long s
  • Reinsert the battery
  • Plug the power adapter
  • Press the power button

  Note: Repeat this procedure 4 or 5 times in the line and check if you could power the unit after each step

• T500 does not wake from sleep mode

  My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

  Thank you.

  Dave

  Try to install the latest version on it. 1.62 should collaborate with the T500 however.

  You can also see if your BIOS is up to date.