Safari slow speed Sync

Similar Questions

• Airport express at slow speed of the modem Arris SB6190

  Hello!

  My so-called WIFi Comcast gives me 150Mbps. My test only show 70 or slower speed on a WiFi test. After the call to them they told me to talk to my modems customer service. But their customer service is terrible. Here is my setup and yes everything has been switched off voltage and reset. And Comcast has been created with the modem while the Comcast guy was here. From the start after a few hard reset the express worked. Here's the question and the installation program.

  I have a SB6190 (not wireless), Arris directly connected to my Airport express. The express (which deals with my wireless connection) is connected to a switch (for wired devices). But I think that my problem is the Express. ? Not sure, I guess my question is I do something wrong in public services from the airport with the Express settings? I do not see why I get more 75Mbps wireless. Or maybe Apple if your reading, you can give it a fix on your next update. Hope you can help and thanks!

  Here some thoughts:

  (1) the Airport Express uses 100 ports Ethernet of Mbit/s, so the theoretical maximum speed that could be achieved with an Ethernet or Wi - Fi through the Express would be 100 Mbit / s.

  (2) the Express is not known for his speed wireless. On a connection of 100 Mbps Internet here, I see usually 45 - 50 Mbps at best more wireless, no matter if the 2.4 GHz or 5 GHz is used.  Ethernet checks better about 75-80 MB/s to the Express LAN port.

  (3) these are user to user support forums, so it is very unlikely that anyone from Apple will ever see your post. If you want to provide feedback to Apple, you can do so here: Apple Apple - AirPort Express - Feedback will acknowledge receipt of your message, but they will not respond after that.

  (4) the AirPort Express was introduced almost 4 years ago and it's been 2 years that Apple has provided an update firmware for the product, so additional updates are not probably... my opinion.

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• Slow speed of the internet in the normal mode and fast speed in SafeMode - Win 7 Home Premium

  Hello

  I have a slow speed of ~ 5MB internet when I was on about 30 MB. I thought he was the provider, but my laptop under that Win Vista Home Premium Wireless is fine and I got 23 MB download speed. The office win 7 Home Premium - use Firefox browser version 31, avast antivirus and virginmedia super hub 2.

  Someone at - it ideas please? I'm frustrated by the slow - flying it in safe MODE.

  No problem, it is stated in the pilot with no yellow question mark.

  Any help would be welcome at this depressing time.

  Would it be the power supply PC or modem/router (but if it works in safe mode, it is unlikely?)

  Thank you

  Steve

  Hello

  I found it's an AMD program called Quickstream AMD that is supposed to do a slow connection for streaming video faster, but it had the opposite effect for me. I have since got rid of him and we're back to a speed of 30 MB + I had before. I have just the graphics drivers now :-)

  Concerning

  Steve

• Intel wifi link 1000 bgn on Hp laptop connection only to 65 Mbps or Mbps even 58, then 130 for 1 second then back to slow speed.

  I recently bought a computer hp laptop and enjoy wireless n to my house.  I have an another hp laptop which connects to 130 Mbps and never changes.  This laptop however changes constantly and never stays in 130.  It is generally about 58 or 65 and then change during 1 second to 117 or 130 then back to slow speed.  I noticed on the laptop properly configured, it says:
  IPv4 Internet connectivity
  local IPv6 connectivity
  active state media
  130 Mbps speed

  On slow computer, he States:

  IPv4 Internet connectivity
  IPv6 connectivity no internet no access
  active state media
  65 Mbps speed

  I don't know if this means anything, but I guess for this.  Is there something misconfigured on laptop #2 or what?  I can't understand this.  I would like to be sure that this adapter in this laptop is also able to maintain 130 Mbit/s, but there are no at that speed.  Any help would be greatly appreciated.
  Thank you

  I had the same problem with the same Intel adapter WiFi 1000 BGN.  Two things fixed.  My router by default, the band of 2.4 Ghz to a maximum of 130 Mbps for backward compatibility.  Change this 300 Mbps.  Second if your router allows you to set the parameters for QoS make you that WMM is enabled.  Thirdly, map properties network by default to the following on the old card NETWORK interface:

  Channel 802.11n for 2.4 band width = 20 Mhz only

  802.11n mode = disabled

  Ad Hoc QoS = WMM disabled

  The default values have the capacity "N" disabled, because when the card shipped first Wireless N routers were rare, and it has improved the flow of 'G '.  Change them to 'Auto', 'Enabled' and 'active WMM.  The last of them allows the priority to multimedia for the peer-to-peer network data local transfers (i.e. - video streaming, music between two computers in the same House).  Hope that helps.

  Shane

• Warp stabilize AND slow speed

  I want to warp stabilize AND slow speed which are incompatible, so what is the recommended route on this please?

  FOR EXAMPLE, I believe that we must export an and re-import to another, or what? In what order?  Is there a smarter way?

  Export of reimportation down Imaging?  These sorts of things.

  Thank you

  Steve Z

  Stabilize first.

  Choose an export format uncompressed to the DI.

• How to force Safari bookmarks in Sync?

  I bought a new Macbook this summer and to quit using my old one. It has always worked well until I bought a new one (slow, but it worked). I had one last week, and most of the time everything worked well.

  I was able to connect to the App Store to run all OS updates.

  My iCloud drive synchronized all my new files.

  iTunes home sharing works fine.

  Safari tabs same cloud connects and updates as usual.

  But Safari does not update my bookmarks or playlist. I waited about 3 days so he could do something, but it is not, and there is no button "sync" to force it to.

  Any ideas? Thank you.

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Safari slow after update to the last El Capitan

  Hello!

  After the last update El Capitan (April 16), Safari has been slow. For example, goes from one URL to another usually take one or two seconds and takes up to 15 seconds. First of all, I thought that my cable provider was the culprit but then I tried a different browser (Firefox) and it is never slow, even if Safari is still waiting to load a page.

  I also noticed that nsurlstoraged in the activity monitor is consuming a lot of CPU when I'm under Safari, but not when I'm in Firefox.

  I tried to disable all extensions in Safari as well as connection points disabling (where there is a conflict somewhere), but it does not solve the problem.

  I really prefer Safari on Firefox, but for now I need to run Firefox just to get the work done.

  Any thoughts on where to go from here?

  Thanks in advance for your help.

  Armand

  Troubleshoot the Safari plug-ins... (not the same as Extensions)

  Go to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

  If it does not help the process of nsurlstoraged, try resetting the SMC as mentioned in a similar discussion here > CPU Load from NSURLSTORAGED

• Fan noisy and slow speed for the Macbook Air with 10.11.4

  I hope you can help me.

  I upgraded 10.11.4 on my Macbook Air a couple of days. It is a model of 2013 Mid, 1.7 Ghz Core i7, 8 GB of RAM.

  I don't know exactly what my last update was - but was El Capitan any.

  I tried LANDAU and SMC resets.

  Previously, she has chugged along fine. The fan was quiet most of the time - only hit on when I used Lightroom.

  Now, the fan kicks on regularly, most of the time actually. And it's MUCH slower. Very lag sometimes when you type in Wordpress, for example. And lightroom is much slower. Also, when I use FaceTime, video often turns itself on and off--with a message informing me that it will resume when the computer cools down. Yet the back of the computer does feel not hot at all.

  I tried page of Chrome in Safari. Doesn't seem to help much.

  I am currently traveling to the Peru and did not my hard drive with my last backup, Time Machine, by hand, so as I understand it, I can't go back to a previous update.

  The Kernal task often seems to have a very high CPU %: 250 or.

  Right now, I'm trying to download the Combo, I read that this can sometimes fix glitches.

  Any help is greatly appreciated!

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth material test, an appointment of 'Genius' to an Apple Store, or go to an other authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• Qosmio F20 - slow speed of WLAN

  The speed of the WLAN on the Qosmio F20 became very slow. With the help of a cable ethernet or other WLAN peripheral speed (i.e. the USB WLAN dongle) is well, but builds in the PRP/Wireless Intel 2200BG adapter it grinds just practically interrupted.
  I've already checked all the drivers are updated including BIOS and drivers for WIFI cards that are now on the latest versions, but this has not helped.

  The State of the WLAN card indicates the power of the full signal 'excellent '. I have a 3Com office connect all points access router wifi b/g, channel 11, WPA PSK TKIPand other wireless devices / computers connect ok at full speed to the AP.

  Any ideas to solve this problem are greatly appriciated.

  Thank you

  You use Intel Proset to manage the Wifi connection? Removing it and let Windows manage the Wifi.

  Try disabling your Antivirus/malware software, maybe its interfering with the connection.

  Also try to update the firmware on this router 3Com.

• Slow speed by phone as a modem on the Satellite L650

  OK so I got this new Toshiba Satellite L650 and I was connecting to the internet via my phone as a modem (dial-up speed :()
  My phone says it is capable of download speeds up to @ 150 Kbps, but the connection is never active...
  It remains active for about 6 seconds, then drops off to start again and so on and so forth...

  So I bought a stick mobile broadband and the connection seems good... all full service bars and a so-called speed of 2mbps, but the same thing... it starts at about 200 Kbps and less than 10 seconds it drops to 400 bps and then stops...

  What the hell I am doing wrong? I downloaded the drivers from the Toshiba site and updated the bios? HELP Please?

  Hello

  I doubt it has something to do with the laptop.
  I know that my mobile phone operator to slow down the speed to the GPRS standard after particular data traffic has been downloaded.

  This is perhaps the reason for this

• Satellite C55D-C-15J wifi slow speed.

  My laptop has a speed slow wifi, about half, on the same condition of wifi. If I click on properties of links, it shows 54 Mbps instead of 72.
  I checked the power management, is the max performance, but no result.
  When was new, with no updates of widows, the speed was of 72 Mbps, about 50 M dowload, 40 M download the Speedtest site.
  Is the windows problem or an adapter?

  Posted by valmar1967
  

  My laptop has a speed slow wifi, about half, on the same condition of wifi. If I click on properties of links, it shows 54 Mbps instead of 72.
  I checked the power management, is the max performance, but no result.
  When was new, with no updates of widows, the speed was of 72 Mbps, about 50 M dowload, 40 M download the Speedtest site.
  Is the windows problem or an adapter?

  You can close this thread, because I will return this product to the seller.
  I thank the of for good management, TOSHIBA!

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• T400 problem with slow speed internet wireless. Help, please

  Hello

  Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

  Problem:
  upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

  I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

  OS: Windows 7
  Network cards:
  Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
  Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

  I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

  Wireless configuration:
  Wireless g connected to the modem access point high speed
  So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

  Thanks for reading this. I hope that some kind soul can help.

  pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

• Need help troubleshooting transformation slow speed on my new iMac

  New iMac, purchased in August 2015, worked well until this week. Now, everything happens very slowly. Color wheel, slow, typing speed, applications crashing, etc.

  It's an iMac with 1.4 GHZ Intel Core i5 and 8 GB of memory. From this moment, I have 433.16 free BG to 498.93.

  I just upgraded to 10.11.1, but the speed slowed down before the upgrade.

  I have a suspicion of naivety that recent web video game adventures of my son may have something to do with the slow down. He's young, and he may have clicked on somehing involuntarily. Is there a way to eliminate unintentional downloads? Other suggestions?

  Thank you!

  It is likely that you are right, but you can download Entrecheck http://www.etresoft.com/etrecheck to make sure.

  Post your results in this thread.