SanDisk e280 mp3 is stuck at start sreen, HELP!

Similar Questions

• Laptop stuck on "Starting Windows" screen

  So, this afternoon, I tried to start my laptop HPG42-373, and it got stuck on "Starting Windows" screen. I ran tests of memory at startup and primary HD, in which startup failed, and primary HD came out with this: "hard disk 1 (303) Quick '. What can I do to solve this problem, if anything, or just to save what I can from my old files?

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  ************************************

  Concerning access to the data on this HARD drive, here are some options you can try.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• Windows 7 laptop stuck at "Starting Windows"

  I'm unable to connect to the laptop, because it gets stuck at "Starting Windows". Kindly help

  Try the last known good configuration:

  http://Windows.Microsoft.com/en-GB/Windows7/using-last-known-good-configuration

• Stuck on "starting windows" screen during installation of Windows 7

  Hello

  I used windows 10 in dell inspiron13 7000 series. Now, I want to use windows 7 as for my personal use. When I try to boot my laptop with USB stick bootable, because I don't have cd player in my laptop. The problem is when I run the startup it stuck at 'starting windows' screen I can't go any further, so I need force shutdown my laptop. I am unable to install windows 7 on my laptop. What can I do, please help me.

  Thank you.

  Hi Praveen,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. is Windows 10 still installed on your computer or you have wiped the hard drive?
  2. don't you upgrading from Windows 7 to Windows 10?

  Thank you for details on the issue.

  If Windows 10 is installed, you can downgrade to Windows 7 within 30 days of the upgrade. If it crosses the 30 day limit, the option in the settings that allows you to return to your previous version of Windows will not be available.

  Please see this link:
  Return to Windows 7 or Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

  However, if you want to install Windows 7 from an external installation media, you can re-create the rack installation of Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  It is possible that the installation media does not develop properly. Please also make sure that you disconnect all the devices connected to the computer before installing Windows 7.

  Note: You may lose programs installed after upgrading Windows 10. I strongly recommend to back up your personal files and data on an external hard drive.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Try to load windows on the new drive, stuck at 'starting windows' screen

  So I'm actually down ranking of windows 8 pro to windows 7 pro two 64. I was finally able to get the comp not recongize just load the USB. My problem is that when it does not start, I'm stuck at 'Starting windows' screen I was wondering, perhaps, that I need to format a patition first? It's a new Lenovo warranty hard drive. (Kind of funny how to send CD's for a laptop that doesn't have a cd player only) I looked in the formatting of a usb key, have had some difficulty in finding a reliable way... Thank you

  Hi davefromsb,

  Windows 8 computers have a bios "UEFI" and so will come with "Secure Boot" as well as "UEFI" only start enabled. Disable secure boot if you do not have and choose start to the "legacy" methods The problem is most likely that the image of Windows 7 which has been engraved on the USB key was burned using an instead of a TPG one MBR partition scheme. I hope this helps.

  -Brian Chan

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• My Sansa e260 seems to freeze when I start. Help, please?

  Hello

  For the last two days, my Sansa e260 refused to start completely. It starts, goes to the black screen that sansa logo and then freezes. I took out the battery and turned it works a couple of times. I even let the batteries run out and reload it later to see if that would help. (he didn't)

  I really don't want to have to buy a new mp3 player. If anyone can help... Thank you. : )

  You may have a bad file that confuses the firmware as it tries to start.

  Can connect you to your computer? (Preferably in MSC mode.)

  Try to run the error as explained in this FAQ checking.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=announcements&message.ID=147&jump=true#M147

  If this does not work, you will have to Format and delete all of your files. (If you can connect, make copies first - but when you reload, reload only a little at a time if you don't put a bad once again.)

  If you can establish a connection to MSC, right click on the drive of the unit (X (any letter): Sansa E200) and choose the Format to FAT32.

  Or use the sansa.fmt here:

  http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=913

• try to download Acrobat Pro, get "WebGet request failed" and download stuck at 29%, please help

  try to download Acrobat Pro, get "WebGet request failed" and download stuck at 29%, please help

  Hi Tom,

  I recommend to use the direct download link: download Acrobat products | Standard, Pro | XI, X

  Please let me know if you still face challenges.

  Kind regards

  Rahul

• FRM-18105: failed to start the help system

  Hello

  I'm in Oracle Forms 11.1.2.0 you try to start the help system and getting the error message below.

  FRM-18105: failed to start the help system.

  I have to check the registry entries or system variables?

  Thank you

  This issue is finally resolved. After I compared the FORMS_BUILDER_CLASSPATH variables in the environment vs registry Variables, I found I was missing C:\Oracle\Middleware\oracle_common\doc\online_help\oracle_forms in the registry. After that I added it it still didn't fix it. Then I found that entry C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar was pointing at my old House, so I have fixed to point to Oracle_FRHome instead of Oracle_FRHome1 and my forms launched immediately. Thanks for listening)

• Cannot save v2 on the site Web of SanDisk e280.

  I just bought a new v2 e280 at the Ritz/Wolf camera in Chicago for $36.  Registration of SanDisk will not activate recording e280 v2, v1 only.  As a result, I registered it as v1.  That will cause problems with receiving support, including the RMA if something is wrong?  So, I found two numbers different undernead of the battery.  Let's start with e200, the other does not.  I assumed that the serial number started with e200.  Is this correct?

  The v2 is the only one to have. Good for you.

  If something goes wrong, just call 1-866-SANDISK and talk to them. It is much faster than the contact e-mail and much less prone to confusion.

  And despite all the problems that you see on this forum, you may never have anything deceive you.  Do the update firmware for v2 manually, as in the stickies - which is particularly important for the v2, because the first firmware was a rush job.

  After this, make sure that the files you put on are properly labeled. Read the FAQ on the ID3 tags, download mp3tag and make sure that nothing's going on unity with bad tags. Make sure you also that writing is done before you disconnect it.

  That's all you need to do to avoid more than 95% of the problems reported here.  However, if you download files from shady places and the dump on the device without checking them first of all for the good tags... Well...

  You have a serious business for $36. Put in a big beautiful microSD card and enjoy.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• SanDisk Secure Access V3 does not start

  You just bought the SanDisk Ultra USB 3.0 32 GB Flash drive.

  After you plug in the Win10 PC USB 3.0 port and run the SanDiskSecureAccessV3_win.exe file, it says that a new version is available.

  Click the update button to download. Then he said that the application will restart now. But get msg "couldn't start F:/SanDiskSecureAccessV3_win.exe.

  Is this a known issue? Anything to fix it?

  Just to let others know, I got the same problem today, 13 June 2016.  Delete the executable of the USB then to deal with the new downloaded version worked.  -Mark-

• Windows is loading files... stuck not start disk

  Hello, I have a Server 2008 OS and im trying to install it.

  It is a clean server with literally nothing about it. Pervious OS was Redhat.

  While trying to start the server will automatically try to boot to the CD after he tries to boot from everywhere else, but the problem is that it will not load the CD. Stuck everything when trying to load the CD "Windows is loading files.

  The strange thing is I took another computer with the same exact hardware and the previous operating system as this computer and installed OS 2008 very well. This server is supposed to be just to be a "Back-up server.

  If you guys can think of anything please let me know... Thank you!

  Zero clean up the hard drive. I had the same problem after RedHat installed several years back.

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Stuck at "Starting Windows" screen

  I have a Toshiba laptop, Windows 7 Ultimate. I don't have a recovery disk.

  Whenever I start windows, Windows Error Recovery (http://www.techjaws.com/wp-content/uploads/2010/03/win7-error-recovery.png)

  comes with two choices;

  1. run repair system (recommended)

  2 start Windows normally

  Whenever I try to pick 2, it gets stuck on the Windows splash screen

  (http://www.windows7password.net/wp-content/uploads/2010/07/safemodewindows71_thumb.jpg)
  So I chose 1. He lead me here
  (http://www.fanhow.com/images/thumb/f/fb/Boot_to_Windows_7_System_Recovery_Options_5.png/540px-Boot_to_Windows_7_System_Recovery_Options_5.png)
  I first tried to command prompt, then I typed "chkdsk c: /f/r". It took 3 days already. The last time I saw him, it was already (sorry I don't remember)
  «67 000 + 300 000 files (stage 4 of 5)»
  I left for a while, then when I came back, he was already set to zero. I don't think its been already because it is too long...
  After the reboot, it again displays the Windows Error Recovery screen.
  Then I tried the Windows Memory Diagnostic. Everything went well. The status is always "no problems have been detected yet" until it has finished.
  It always shows the recovery screen.
  I tried the system restore. I chose the last restore point. When I click next it freezes and its stuck in there for a long time.
  Then, I tried System Image recovery, but I don't have any image system backed up.
  Finally, I tried startup repair, it took too long so I cancelled it. I thought it might be like the chkdsk which took too much time, but does not solve the problem.
  I tried the Advanced Startup Options (http://ww2.justanswer.com/uploads/operab/2010-05-17_070306_Advanced_Boot_Options.jpg), then I tried the 3 Security Modes. It did not work. It was just stuck to this - > http://www.administrator.de/images/content/f1a9ac1584b0c371c0381bfaadbbf49f.jpg
  I tried to enable boot logging, enable video low resolution (640 x 480), last (Advanced) well-known Configuratio, Directory Mode, disable automatic restart on system failure and disable Signature enforcement and everything lead to screen "starting Windows"... Help, please

  Hi.As you can see you maybe corrupted/not identified/no valid/not found important windows files or modules. You need a Windows 7 Ultimate CD or recovery disk to fix this... You do not have any of these so I don't know if there is a hope for you. I recommend that you run the Startup Repair tool and leave it until the end. Startup Repair is ___NOT of BEING CONFUSED___ with chkdsk. Startup Repair will fix ALL your problems start (for example your stuck at windows startup). Try it and get back with the results.

  Pending.

• unble to my pc.stuck to a blank screen due to luxand blink face recogninition approx. start please help urgently.thanks

  I'm not able to boot my PC win8

  Let me explain in detail.

  I came to know of luxan blink soptware in anewspaper. its for face recognition to connect to your pc .i instlled it when he guided me Setup and request regular password, with which I logged my pc.to chek it woks, I stop my pc and start again once, he started but has slain to point blank screen when connect sreen should have appeared. [he had taken more time to stop also now only i had dought in my mind] and now have no media recovery [usb or dvd] and I do not know the product key as windows8 came preinstalled on my computer hp laptop pavilliong6.googling my friends pc problem now, I know that white luxand does not support windows8 [windows7 support] and a guy had the same problem as me and he wrote what he has used the SafeMode etc but I do not know how boot/turn on my pc in the first place. Thank you

  Hello everyone I hsve found myself solution, go to hp support and follow the steps, http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03515402&tmp_track_link=ot_faqs/top_issues/en_in/c03515402/loc:3 & cc = in & product = destPage & dlc = en & jumpid = oc_r1002_inen_s-001_r0013 & lc = en & product = 5340259 #N866.

  Run hardware dignostic tests, when you leave the test it says "looks like your computer is not good judgment. "can't access advaced startup options" and your done.u can refresh or reset and other options are there.