Sansa E250 freeze at the loading screen

Similar Questions

• Satellite Pro U400 freezes when toshiba load screen appears

  Please can someone help me!

  When I turn on my U400 it gets to the loading screen toshiba, but then everything freezes and used further.
  I tried f2, f8 and f12 but also simply freeze and goes no further.

  The hard drive light flashes at the start but then stop!
  The battery and the power cable are fine and so is the cd drive such that all continue to work.

  Can a little help if you please?
  I'm a beginner and this is my first laptop!

  Please PLEASE help me.

  Hello

  It seems that the laptop can not pass the Toshiba start screen properly
  What does that mean?
  Well, it means that an error has been detected during POST (power on self test).
  It could be everything. Memory faulty RAM, motherboard part etc.
  It is difficult to provide an accurate answer to this question, it would be necessary to check these parts first.

  Since you are a beginner, I recommend you contact a Toshiba (certified partner) ASP in your country guys may run diagnostic tests to discover the problem.

• Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

  Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

  I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

  UPDATE:
  Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

  Hi Greg,.

  It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

  Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

  If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

  Please complete the steps to diagnose the problem with the boot when you have the chance.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones is frozen on the loading screen

  Hi all

  Please help me for the below raised concerns

  (1) having the blackberry bold 9900 that freezes several times. He stuck where I worked to get resolved from this question in general I removed the battery from the handset.

  (2) but now after placing the battery, he got to reboot and it's still stuck on the loading screen is. This happens several times

  Please advice for the same

  First of all, how long took. I remember waiting nearly 30 minutes once. It was a strange event, but others have reported similar occurred odd, waiting any longer.

  If the BlackBerry is really wrong at startup, follow these steps: start in safe mode. http://www.BlackBerry.com/BTSC/KB17877 immediately do a full backup. Delete the app or apps you recently installed. Remove all the other apps that read do not need. Reboot and see if the problem persists. If so, you can start in safe mode and remove additional applications and test again. If the unit starts up, add the applications that you need and restart as a test.

  If cann ot the problem you, do a security wipe and to test, and then restore backup and install apps. If the problem comes back after restoring the data, then you will need to determine what database is the problem. If the problem persists after erasure security, and before you restore, a clean operating system install using the desktop software.

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Skype is stuck on the loading screen!

  My Skype is stuck on the loading screen! I used to have this problem but I fixed it by reinstalling. I'm on version 7.25 (.0.106) and it does not stop. I have java to work on IE and updated manually.

  What firewall and Antivirus applications are installed on your computer?

• Application of music stuck on the loading screen

  Hello

  I have an iPhone with iOS 9.2, and for some reason 6s why I opened the music app from Apple, it stays on the loading screen and does not open. Left for more than 15 minutes and nothing happens (and Yes, I am connected to WiFi and the internet works fine on my phone). Please notify.

  Best,

  Hussam

  Force to leave the app and/or reset the phone by pressing the home button and the power/sleep at the same time until the Apple logo appears. No data will be lost.

• restart Windows homescreen befor (just past the loading screen)

  Help, please!

  As I said, windows restarts right after the loading screen, but this isn't the only problem after BIOS screen (first), my keyboard no longer works, so I can't choose to load bootable disc or choose Safe mode!
  now my pc restarts again and again! and I don't know what to do! Please help :(

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/308041#3

  It will be useful.

• Windows xp hung up on the loading screen

  I have a gateway LT2016U and windows is suspended upward at the loading screen. the status bar continues to go, but the light of the hard drive on the computer is turned off. When I go to the safe made it stops at the line multi (0) disk (0) rdisk (0) partition (2) \windows\system32\drivers\amdagp.sys to safe mode startup. When I try and make a last known good config is located just at the windows loading screen.

  you could also try mode safe mode with command prompt and see if you get anywhere with the machine.

  If nothing, i.e. None of these boot menu options work, then you should borrow a cd from someone win xp so that you can start with it and start the recovery console.

  I do not have a netbook, but its likely your bios can support USB boot.  in this case, you need a usb cd drive in order to use the above method.

  If using the cd xp is not possible, then your only recourse is to go on the net House books site and see if there are tips that you can use.   but I guess the only option they will bring must provide the step on performing a factory restore, that will wipe the drive and reinstall the original software.

  the original software is the will is in a hidden partition which is inactive on the hard drive.  then using a certain key sequence, the hidden partition will be re-activated and start restoring.

  but send an email to their tech support and see what they say too.

• age of conquerors hangs at the loading screen

  Running windows xp sp 3, the age of the conquerors hangs at the loading screen. I tried all the suggestions in the article and had no success. Age of Mythology Gold edition also fails to load beyond the cinematics (black screen)

  Running direct x9.c

  Other games work fine, just the age of Kings / age of Conq and Age of Mythology - crazy thing is the origin of the Age of Empires loads and runs.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  It is possible that a third-party application is causing the conflict.
  You are required to perform a clean boot to find the program that is causing this conflict and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2.
  Also I recommend you to update the card drivers video from the manufacturer's website and check.
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.

  I hope this helps.

• Windows Vista starts only with the loading screen

  Original title: Problem with Vista Business

  I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?

  Hello RussellNolan,

  It may be possible to solve this problem without having to reinstall the operating system.

  What exactly happens when you try to start normally?

  Let's start with the safe boot mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works, we can try to boot minimum troubleshooting:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps out.

  Best regards

  Matthew_Ha

• I can't get to the loading screen!

  Well... I go to the login screen and charge it up. It goes to the Windows loading page, (if you know what I mean, I'm talking about the small bar, where the green square comes and goes), it's just sitting their forever coming and going.

  So, I put in the disc of Windows Vista and this is what happened.

  1. He went to the screen where it says "Press any key to boot from the CD or DVD..."
  "" 2. it goes to a screen stating "Windows" (the screen is black except for the words "Windows loading" and a small loading bar)
  3. get to the loading screen (where the little green square goes back through the loading bar.

  This is what is happening. IM distraught too why the disc will not work. Please help me. Thank you!

  Stop reposting the same question!
  Stick with the answers in your original Thread.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/741dfca2-6b27-4A1C-9327-ff0904a6a352

  Answers in another Thread. Mick Murphy - Microsoft partner

• Windows Vista will not go past the loading screen

  Hey - last night my computer was working fine, I had nothing to open and was watching television, then we had a power cut, I thought everything was fine. But when I went to turn my computer on this morning he gets just stuck at the loading screen (the one with the green bars). I have tried reboot, unplug the unit and system repair, the windows vista startup disk, just. When I put in the disc, it does something together press button as I do, then it loads the files then goes back right screen loading with green bars, he done the same for any route I'm trying. I could use the help because the computer has very important files that I can't afford to lose.

  Thank you

  Try and back up your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  Good luck with it.

  Cheer.

  Mick Murphy - Microsoft partner

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Boot stuck in the loading screen

  Hello

  I have an Acer laptop, I don't know really how and when it started there is 3 of us using this computer, but now when I open my laptop it get stuck in the loading screen "starting Windows." It is not frozen, it's just stuck there. And in order to enter the actual Windows operating system, I have to first press a key.

  It could be things possible cause?

  Here are some solutions I've tried based on my research on the Internet:

  1 uninstall Antivirus.

  2 reset the BIOS.

  3 chkdsk all discs in safe mode

  4 scannow command, he had errors but did not say what that

  5 edition msconfig and do a clean boot with no start-up of the thread and MS services only.

  I hope someone can help.

  Thank you

  Hello

  What button do you press; F1 or F2?

  If so, check if the Date and time is correct.

  If she is not and again become incorrect after reset correctly, then turn off machine, then turn again, it's a battery CMOS failed in the motherboard, the origin of the problem.

  See you soon.