Sansa Fuze and Ford Sync

Similar Questions

• Sansa fuze and preprogrammed sd card

  We bought only two players from sansa fuze and a couple of cards slotradio pre-programmed.  The cards work fine on a rocket, on the other hand that it says "media refresh" and radio slot icon never appears on the player.  I know that's not the card because she works on the other.  Any advice?  Thank you.

  Thank you!  Who did the trick!

• Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

  Hello Apple community!

  I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

  I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

  I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

  Thank you so much in advance!

  PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

  Kind regards

  Marc

  Hello, m.asebo.

  It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Sansa Fuze and Fedora 11 and Banshee (linux)

  OK I use Fedora 11, I loaded the Banshee on my system I can convert songs on my player. I can't convert videos on my player so I can watch videos and movies?  What can I use to coincide with the Sansa fuze using Fedora 11? or would that be a wrong format because fedora is ogg. the format? And which converter am I suppose to use to get my videos?

  A second solution for video conversion on any linux system is described in this thread. You can go directly to the "accepted solution". It is easy to set up and runs from the command line.

• Sansa fuze and extension of memory of 16 GB?

  Hi I have been checking out the site because my girlfriend bought me my rocket for Christmas.  After doing several searches, I see a lot of people have improved their fuze 8 GB and bought a 16 GB Micro-SDHC card.  My question is when I go to the sansa site, why they does not offer memory card 16 GB as a choice for expansion and only sell the 8 GB card?  I was intending to buy Sansa site just to make sure that I was getting what I really need, but they are not available.

  I found it online somewhere else, I think that that's what I need to increase my memory.  Can anyone confirm?  The SanDisk 16 GB Micro SD High Capacity (microSDHC) Flash memory card (packaging in bulk) for sale online for about $50, the only thing that holds back me to the top is the index of performance of speed.   She indicates that she has speed performance rating: class 2 (based on SD 2.00 average specification?)  I see the sansa accessory store are a 8 GB class 4?

  Should I pull the trigger?

  Thank you

  Pull it. 'Speed' doesn't mean much. I have the card you are watching. Works very well.

• BlackBerry Smartphones and Ford Sync - help!

  I just bought a Torch 9800 yesterday after having a Curve 8330 years and may not know how to connect the bluetooth with my car. There is no icon to set up as the curve was and I did several searches without result. Help!

  OK everybody, thanks for your help, but my guy from Ford of good neighbourliness, fixed it for me! You'll love em!

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Song Sansa Fuze Max file size?

  Hi I have a sansa fuze and tried to play a very long piece of music (mix) as a song, but when I try to play the "rocket" plant - gray screen.

  Is there a maximum file size for the songs on the "rocket" or something?

  Thank you very much

  Thanks for your help.

  I'll look into it, but clearly it's hogwash f I need some sort of 3rd party software and edit the files just to play an mp3 on an mp3 player! Not to buy another player from sandisk. Too bad, I did not read these issues before leaving with my money.

• Sansa Fuze not set option

  I spent my sansa fuze and realized that the setting on the homescreen option wasn't there. I tried to reset by holding down the power button for 15 seconds and it always comes out the same, I don't think it's resseting anything. Is there any solution for this?

  I think stores have a "demo Mode" which prevents clients from mess up the settings. Try to reload the firmware manually, the regions all the link to the thread to the top of the page.

• Fuze and Rhapsody

  Hey, I ordered my rocket online and did not receive a CD that was supposed to come with her. My friend has a Sansa Fuze and it had an icon on the main menu that says Rhpasody To Go.

  1. What is Rhapsody To Go?

  2. How can I get Rhapsody To Go to my sansa fuze?

  The Rhapsody service is a great way to explore new music, without limitation to purchase individual albums.

  You don't need the mini-CD, simply try the trial version described here.  The Rhapsody client (the program that runs on your computer) has recently been amended and improved, getting with the new customer for sure.

  RealNetworks has chosen a name confusing for service 'portable', the titles that you can download to your Sansa.  It is the Rhapsody To Go service.  The unlimited service simply refers to unlimited access on your PC.  Note that a single account allows you to use three devices, which is very nice.  I have a wife and three daughters, so I have multiple accounts.  As fast as change their taste in music, I'm happy are exempt download fees.

  Bob

• Sansa Fuze attached to my docking station

  Hello

  Initially, I got an iPod touch and he hated. (Due to the process running in the background kills the battery time more so than if I was listening to just mp3s.)

  So I just bought a Sansa Fuze for a realitively cheap off a merchant online and I expect to soon.

  My question is...

  I have an iPod dock which is also a radio and it has the iPod base and the setting of the radio, but also has a cable to THE outputs.

  I was wondering if I made a playlist on the Sansa fuze and attached the Sansa Fuze to the iPod via the port dock to THE and kept the playlist on the shuffle affecting all night and when the alarm turns on the time I put to him, I have here would be the songs through the reading list since technically the speakers had to be activated so?

  I let just the sansa fuze on the wall charger, I also bought.

  I think it would work, what do you think?

  Thank you very much for your help.

• Will this work with Sansa Fuze?

  I just received an FYI Emerson iC2196 CD Clock Radio with docking station for iPod - as a gift.

  I have a Sansa Fuze and this was bought to me because it says no entry to connect iPod and other Mp3 players...

  It seems that the "rocket" will link- but I don't want to break anything!

  OK - I'm writing this, I went to this Web page:

  http://www.target.com/Emerson-iPod-alarm-clock-radio/DP/B0013AG3DY

  I see that it says that it has a line-in for MP3 players - so I guess that means that the dock works only for the iPod - Yes?

  Is there a unit similar to this - CD clock (with or without radio) will be also dockable and play the Sansa Fuze.

  I'm not very technical on this stuff - so any advice is greatly appreciated.

  Thank you!

  Ellie

  NEVER plug a Sansa into an iPod dock connector. They may look alike, but they are wired differently. Chances are good that you will FRY your Sansa. If it says "works with other MP3 players", which means that it works by connecting via the headphone jack of your MP3 player, and not the dock connector.

  There is a Timex clock radio that has a dock from Sansa. Search for "sansa clock radio timex" on Amazon or similar sites and you should find it easily enough.

• Help - just sync Sansa Fuze 4 GB and not selected folder names

  I just sync Sansa Fuze 4 my wife Go with Windows Media Player and folder names are not preserved. It's the folder view using the artist name and it is not how the songs were - they were on the PC as "Classic country" etc. That's happened? I have one without Fuze 2 GB that displays correctly when I sync the files... How can I fix it?  I'll try to redo with her in another mode to USB using windows Explorer to load the files and see if that makes a difference, but why the difference between the 4 GB Fuze and Fuze 2?

  
  

• New and strange problem with Rhapsody to go on my Sansa Fuze

  Have a Fuze with 8GB micro SD 8 GB card inside and use for a long time without any problem with Rhapsody. Recently, I had not synchronized for a long time and got the message to play the tracks of my subscription, I need to sync with Rhapsody. So I don't tell me, no problem, and I do. The synchronization works very well and I get the message Rhapsody, it's reading the tracks on my Sansa and I get the message that it updates the internal memory on my Sansa. Then everything is finished and when I click on the internal or external memory, Rhapsody, I get the message that all is well and she sees all my Sansa great Flickr photos. I even put a couple of new albums of Rhapsody on the SD card in my Sansa. Once again, no problem.

  BUT when I disconnect the Sansa (again once, normal behavior with the green bar on the Sansa screen and the message it refreshes my media), he always says I have to synchronize to play the tracks on my subscription.

  Have tried resetting the sansa, tried the sansa when logged in to rhapsody, but nothing seems to solve this problem of license. How can I fix?   Thanks a lot for your help

  Ah, I leave you with the secret handshake to reset the secure clock.  Normally, this is done in this last step, when you transfer a track to the device.

  Open the client Rhapsody 4 and plug your rocket.

  Now for the tricky part.  Crack the knuckles and fingers ready.  Press and hold the [CTRL] + [SHIFT], then right-click on the "rocket" in the Sources pane.

  There you go.  Select Reset secure clock.

  See if the device is now happy.

  If all else fails, use the Format command on the "rocket", which will erase all media device, and then start over by allowing first and transfer some test tracks.

  My theory is that something is wrong with your secure clock...  Let me know how it goes!

  Bob