Sansa Fuze power indicator

Similar Questions

• WHAT DO NEED ME FOR MY SANSA FUZE POWER DOWNLOAD MUSIC

  I know that I need the Sansa Media Converter... but I was not able to download from the Site of Sansa because whenever I would try to and after I click Run and everything a small window box would pop up and tell me I didn't have any internet connection (uh, I do).

  So where can I download the Sansa Media Converter and this is what it should look like: http://yfrog.com/14sansapicturep

  I really need help otherwise I won't be able to do anything with my Sansa lol.

  delete this; wrong category

• Sansa Fuze stuck on the white screen after disconnecting.

  Once I unplugged my Sansa Fuze on my PS3, it got stuck on a white screen. None of the buttons worked and I couldn't turn it off. I decided that the only thing I could do was to let the battery die and charge it again. Finally, he died and I plugged it in, it loads to full is the same thing. So I tried again, except I only left it plugged in for a while and disconnected. My music has arisen and it seems to work, but it stops immediately by the lack of power. Now no matter what I have plug in, it lights at all. I connected it to my computer and installed the drivers for it, but the rocket itself did not come, and the computer says it has malfunctioned and pilots have not been recognized. So now I can't listen to my music or anything like that. Help?

  Drag the spring-loaded power switch in the highest position for 20-30 seconds. (note that in extreme cases it can sometimes it may take a minute). Release and see if it boots normally.

• Sansa Fuze don't will not load! HELP!!!!!!!!!!!!!!!!!!!!!!!

  I have had my sansa fuze since last Christmas.

  The first time my sansa fuze wouldn't load I came here and someone told me to hang it to the USB port back because he has more power.

  So I got this new computer recently and my computer will not recognize it. I tried to uninstall it in my computer, but nothing works for me.

  Any ideas on how to solve this problem

  Thanks for the help

  First try all ports - and no hubs USB, just connection is direct to the computer.

  If there is still no love, go to Settings/Control Panel on the "rocket" and change the USB MSC Mode and see if it charges.

  Look in the computer and see which version of Windows Media Player, it is a. (open WMP, click on help and about.)  It must be 10 or 11 to recognize the "rocket" in MTP mode, which is probably what you value. Update Windows Media Player 10 or 11, and you can move on to PSG.

• My Sansa Fuze 8 GB MP3 player screen is white!

  My sansa fuze 8bg mp3 player is to have a white screen which is tormenting the buzz of life outta me! He can still play music, but I'm getting tired of it... can someone help me? I didn't reset all the songs that I put in!

  I don't think it's my drive hard because it's awesome so far. Also, I found a way to not "reset" all my important files and 'help' with you 'IkTech09 '.

  If your sansa fuze 8 gb screen is as white as the clouds, follow these steps to get rid of this siteeuation:

  1. connect your mp3 player to the computer

  2. you see the white screen (duh!)

  3. press the power button and wait for her to stop

  4 press it again until it lights up

  5. then you will see the Welcome screen again

  that should help you and if you already got rid of your mp3 player, I am ashamed that you've wasted your money and did not try something that might have helped your mp3 player working again.

• Wall charger USB high speed will work with Sansa Fuze?

  Salvation;  I think to buy a double wall on Amazon USB charger new Trent, 10W 5V/2 has two ports high-speed USB AC wall charger (IMP90C) http://www.amazon.com/Trent-Dual-high-speed-charger-IMP90C/dp/B009RXU59C/ref=cm_cr_pr_pb_t

  Characteristics of the product

  • 2.1 wall charger high-speed USB AC 10W amp load.
  • Two USB outputs to charge two devices at the same time.
  • Quickly recharge all your devices USB 5V from a wall outlet
  • Ultra Compact.
  • Overload and short circuit protection

  Product description

  New Trent, wall charger USB double IMP90C
  IMP90C is a secure and high speed charger double USB AC wall charger new Trent. This compact and lightweight charger is compatible with all smart mobile / cell phone on the market with the other compatible similar 5V devices USB rechargeable and a replacement of your OEM charger. Just plug the IMP90C into a wall outlet to US and charge your devices (two devices at the same time that maximum output 2A).

  Compatible with numerous Smartphone/Tablet PC
  -Apple: (4th gen) iPad with Retina, The New iPad screen (3rd generation) / iPad2/iPad/iPhone 4S 5/iPhone / iPhone 4 / iPhone 3Gs / iPod Touch/Classic/Nano
  -Samsung Galaxy Note /Galaxy S2 / phones Galaxy Nexus/all the other Samsung cell
  -HTC Evo Shift 4 G/Incredible feeling/S XL /Thunderbolt / 3D EVO / EVO 4 G / all other Samsung cell phones.
  -Motorola Razr/Atrix / Bionic / the other Motorola Droid X cell, phones X 2 / triumph/All
  -Nokia N900 Lumia / C6 / C3 C7 / E7 / X 6 / N8 / N97 / all the other Motorola cell phones
  -Blackberry Playbook / Tour / Storm 2/curve/Bold/all other cells of Blackberry phones
  -LG Optimus / Quantum / Vortex / all the other cell phones
  -The car charger is also compatible with most tablets 5V which includes the new iPad / iPad 2, Nook color, Nexus 7, etc... and portable game consoles such as Nintendo DSi/3Ds/XL, Sony PSP/PSvita etc. Maybe need a cable or special adapter for some devices: please contact iDealpoint for more details

  Plug
  -Two USB ports
  -Universal 100V - 240V compatible

  My main questions are: would it work with my rocket or it's turn off too much power?  It would hurt my rocket?  This looks like a nice charger.  Any help would be appeciated.  Thank you!

  Thank you;  I just did a live chat with Sansa and they have also confirmed that this charger should work perfectly with the Sansa Fuze.  He received 159 very good reviews on Amazon, all the 4 and 5 stars.  I can't wait to order.    http://www.Amazon.com/Trent-dual-high-speed-charger-IMP90C/DP/B009RXU59C/ref=cm_cr_pr_pb_t

• Sansa Fuze not set option

  I spent my sansa fuze and realized that the setting on the homescreen option wasn't there. I tried to reset by holding down the power button for 15 seconds and it always comes out the same, I don't think it's resseting anything. Is there any solution for this?

  I think stores have a "demo Mode" which prevents clients from mess up the settings. Try to reload the firmware manually, the regions all the link to the thread to the top of the page.

• Sansa Fuze Skip Song

  1 month ago I bought a Sansa Fuze 4 GB, and I really liked it.  In that first month, I transferred music from Microsoft Media Player for the "rocket" with no problems and I also played music without any problem, so I see no problem.  Everything seemed to be working great until last night when I installed the new firmware.

  I installed the new firmware using the request for the Installation of the Firmware Sansa. After installing the new firmware, I had to Resync my library.  I noticed after the resynchronization when I played music, many songs on the "rocket" should be ignored.  For example, I would play the ABC song after song what ABC ended, I see the image of the song DEF, but song THAT DEF would not play and the "rocket" would skip to the next song HIG.  If I tried to navigate back to the song (DEF), which was initially ignored, should be displayed, but the "rocket" would skip to the next song HIG.

  If I tried to navigate directly to the song ignored interface of rocket, the song wouldn't play.  Artist ZYX has several songs in their folder.  If I chose to play all the songs of this specific artist, the "rocket" would skip infinitely without playing any music.

  Also, after I updated the firmware, I noticed all my music was removed from the "rocket" and my GoList was empty.

  Does anyone have recommendations on how to solve these problems?

  Update

  I tried the "rocket" by sliding the spring power switch on the side to the top as if you turn on the device, but hold position for 20-30 seconds as described here http://forums.sandisk.com/sansa/board/message?board.id=sansafuse&thread.id=44242, but he did not rest.

  Thank you

  BarDev

  Thanks for the suggestions.

  I have connected the "rocket" to my computer and was able to play a song on my computer from the "rocket" which was previous fried.

  I formatted the disk.  After formatting the drive, I resynced the "rocket" Media Player.  Now, everything seems to work.

  Thanks for the help.

  BarDev

• Sansa fuze doesn't recognize the storage capacity all and does not load?

  My 8 gb sansa Fuze only recognizes about 400 MB and will no more. It is just over a year and has worked well before. Nor my sansa fuze or clip will hold most any kind of a charge. The clip is about 2 years old. I recently bought a new computer and I am running windows xp. The two sansas stopped working after I tried to load them into my new pc. What could have caused this and how can I solve this problem? Thank you.

  You can have a file in there that stifles the Sansa, wielding Media update. If it gets stuck, hold the power button and keep it for 20 seconds after the screen turns off.

  Your update is probably spent the USB mode to automatic detection, which will be a PSG connection if it detects Windows 10 or 11 on your computer - but XP comes with WMP 9 unless you have updated, that would send Auto Detect Meteorological Service of the Canada in the event where it is not working properly.

  I suggest reloading the firmware, just in case. Search in the firmware upgrade instructions near the top of the first page of the forum force MSC for the upgrade.

  Then choose a mode - MTP or MSC, depending on what you are used to - rather than the automatic detection function.

  And if it remains stuck, while you are using MSC run Error Correction. Right-click on the drive, properties, tools, error checking. He might find a problem file.

• Sansa Fuze frozen

  I recently bought a Sansa Fuze 2 GB and it has worked well up to that earlier. I add music to my laptop and it said there was a synchronization error so I plugged not Mp3. Now, he is frozen and says simply 'written' with a blue circle. My battery is full... If it makes a difference. Can anyone help?

  Slide the power switch for 20 seconds to reset the "rocket"

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• "Sansa Fuze v2 freezes on ' update your media.

  I had this problem since I got it earlier this year.  I tried to solve this problem in many ways.

  First I thought it was a problem to do with the tags which many of you have told me, but after having systematically organize every single audio track, remove all comments, artist information, album art, composer and using mp3val error check each audio track the problem still remains.  The only information on each track are kind, year, song title, artist, album name and track number (this I did on Mp3tag and saved ID3v2.3 ISO-8859-1).

  The sansa fuze that I is a model of v2 4 GB with a MicroSD of Kingston 16 GB card.   Honestly I am so sick of having to choose who I want to because music the largest number of songs I had on it without it freezing songs s 560 - I would add that most are mp3, some are in flac.  It's less than 6 GB on the 20 GB I have available which is ridiculous because the point all I got a rocket was so that I could increase its capacity without having to buy expensive media players

  I have tried updating to the latest firmware but back to 1.02.26 because the problem remains to be 1.02.31.

  Good because it will probably be easier to read and make more sense if I just list this information (instead of try to structure some sort of coherence).

  D ' other information that may be useful, it's that I have no video, no photos.

  -The problem seems to occur after a threshold of the number of songs I have.  For example, when I transfer an album more and it freezes / hangs on the screen "refreshing your media", I have to force it to shut down by pressing the power switch.  Most of you might be thinking that it is again with the offending audio tracks (bad tags etc), however I found that if I remove some albums and try put on the same album, it will be no problem to do.  Only after reaching a certain number (?) of songs that seems to happen.  I'm not going to say as a fact that I'm not 100% sure of that.

  -After the screen "refreshing your media" frozen that I have to go back and remove all of the albums, I added which causes the problem.  This might appear as normal except there is no audio data files just an empty folder with the name of the album.

  -All titles scanned with mp3val as having 'problems', I removed permanently of the device.

  -All the music is transferred in MSC mode - drag and drop

  -It never freezes if I transfer audio files to the internal memory.  For example, the album which causes the freeze/hang up can be placed on the internal memory of sansa fuze - no problem

  For the love of all things good someone can you please help me solve this problem, I'm sure this can be fixed.

  I will update that I can't imagine all the things I've done

  Thank you

  
  

• How to move files to support 8 GB SanDisk Sansa Fuze player to the computer?

  How can I move audio files of SanDisk Sansa Fuze 8 GB Media Player from my computer using Windows Media Player 10?  I did it in the past with the previous versioins of Media player, but this version does not offer this option.

  Have you checked the web site of Sandisk?  http://KB.SanDisk.com/app/answers/detail/A_ID/389

• No sound on computer, using SanDisk Sansa Fuze 8 GB Media Player Silver

  MyComputer has no sounds

  original post: SanDisk Sansa Fuze 8 GB Media Player Silver

  Hello

  • You receive an error message?
  • What were the changes made before the show?
  • What player you use to play?

  You can check this link:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.