SAS via failing OME drive update

Similar Questions

• HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

  Hello

  I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

  Thank you very much, Rich

  Hello

  Follow the steps below to uninstall the driver:

  1. Press the Windows key + R
  2. Type devmgmt.msc
  3. Press Ok
  4. Right-click on the graphics card and select Uninstall
  5. Restart the computer

  After the computer restarts, run the Windows Update and the last update will be installed.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Pavilion g6-2002au: USB driver update failed

  I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

  This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

  http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

  And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

  

  There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

  

  Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

  I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

  This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

  

  Any ideas why this (the driver update failure) happens?

  Davidk10

  @Davidk10

  There is no update from HP, the prograns you are using is not supported by HP.

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

  A long download and install driver for Nvidia ended with the message of this failure. What should I do?

  You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

  Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• Samsung ATIV Smart PC Touchpad Driver Update Failed

  My Samsung ATIV Smart PC watch Installation have failed after I updated using the SW update. May I ask how to fix it?

  Worked for me, thanks.

  Removed keyboard HID HID-compliant mouse peripheral device manager then rebooted and installed the SW update driver.

• CCC and AMD graphics card failed after the driver update

  I have a HP Pavilion dv6 laptop 6 c-32eg.

  I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."

  If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "

  I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.

  My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.

  My laptop has doubled (switchable CCC) graphics:

  -AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.

  -And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.

  I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.

  So, my question is: how to I find the full use of two graphics cards?

  Here is a copy - paste of my information system:

  Spoiler (Highlight to read)

  The performance Information and tools
  More details on my computer
  Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium
  
  System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10
  Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10

  Hello

  There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.

  Try restoring the system first.

  If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.

  http://leshcatlabs.NET/

  Kind regards

  DP - K

• Qualcomm AR9485 Atheros Wifi card driver updates?

  I have a laptop of HP2000 running Windows 8.1

  I was hoping an update for this network card because I had problems with connectivity network for several weeks and several times the windows diagnostic resets this network adapter.

  I get the notice via HPSA that there (2) updates to this network adapter.   I can download updates, but the installation failed on both and I don't know why or where to look to find out why.  Study now has me completely confused.  Here is what is currently installed on my laptop:

  Qualcomm-Atheros 802.11b/g/n WiFi AR9485 adapt

  SoftPaq number: SP65428

  Driver date: 12/11/2013

  Driver version: 10.0.0.274 (1.00Ap7)

  This update of the driver was JUST installed on 14/04/2014 (3 weeks)

  　

  Here is the info on what HPSA watch are updated for this card-

  Important updates, note first received Saturday, April 26, 2014

  Updates download but would not install.

  * Qualcomm Atheros AR9000 series Wireless LAN Driver for MS Windows

  SoftPaq number: SP63802

  Version: 1.00Ap21

  Size: 73.89

  * Qualcomm AR9000 Atheros Wireless LAN Driver for MS Windows 8 series

  SoftPaq number: SP62425

  Version: 1.00Ap17

  Size: 38,27 MB

  (research on hp.com for SP62425 the date this update 26/06/2013)

  Both of these driver updates seem to be more OLD than what I currently installed?

  If I go My HP account have my system scanned for updates, the SP65428 I have already installed is displayed. Neither HPSA showing that I should install appear on my updates.

  I guess the question I have now, it is what is the most current, correct pilot and working for AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter?

  And if that's what I have already installed it, why I received this notice am updates HPSA?

  Thank you.

  By a post elsewhere in the Forums of HP, current updated driver are available at http://www.station-drivers.com/ .

  I downloaded and installed

  Version: 10.0.0.287

  Published 25/03/2014

  and from this moment, everything seems to work properly.

  I would still like someone to confirm that it is suitable for the AR9000 Qualcomm Atheros driver series network adapter for Windows 8.1.  And if I NOW the current driver is there a glitch in HPSA to send assignments to update driver irrelevant?

  Thank you!

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• buttons (F1, F2) lighting control doesn't work after driver update chart 10 bootcamp windows

  Hi, after last update graphics driver via the apple software update in windows 10 macbook pro retina 15 "(mid-2015), buttons (f1, f2) lighting control is responding more... tx for any help. Michael

  On the side of OS X, download BC drivers on a USB FlashDrive to aid

  

  Re-run setup.exe from the Bootcamp folder on the USB after Windows and test.

• Touchscreen driver update problem

  So, I have a HP tm2t touchscreen, Windows 7. Everything works fine, except for the button; is not serious if I try to touch it with your finger or the stylus, it wouldn't recognize it. I tried all the stuff mentioned in other articles, still does not not + if I want to update the driver (Control Panel-> hardware and sound-> Pen Tablet properties-> download driver update), a windows pops up saying "windows cannot find ' @C:\Program c:." Make sure you typed the name correctly and then try again."

  For a few days, whenever I open the VLC Player, he'd say the operation has failed, and I should update the driver of the touch screen. However, everything would work ok if I was just opening it again. Then, Windows did some updates and option of touch screen of the laptop works with no possibility to update its drivers.

  No changes were made to the system until the problems.

  Don't know what to do?

  I'm not sure of the right reason why it would not properly work in a note only.

  Now that the digitizer has started working in Word 2010, I suggest try reinstall Office 2010 to solve the problem with a single note.

• HP Pavilion 15 laptop: amd driver update after that upgrade from win 10 leads to the boot failure.

  I have a HP Pavilion 15 laptop.

  After I my windows 8.1 upgarded to win 10 and decided to update my graphics driver amd, after the installation of update to the course to restart commissioning hangs at the hp logo (sometimes to start startup repair, then fails).

  This only happens on this specific driver update... do not update this driver translates by "display driver stopped working / crashed and now has recovered" message.

  is this a problem with the update of the driver or I can't use this update in win 10?

  Hey @AnjaneyaAnand,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  For starters I would say that the HP Support Assistant running.

  Here are some useful links for the HP Support Troubleshooting Wizard or by downloading the latest version:

  HP Support Assistant

  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  With the help of HP Support Assistant (Windows 7, Windows Vista)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)
  HP PC - troubleshooting HP Support Assistant (Windows 7)

  I highly recommend to run the Windows Update tool that it can find and update all the old drivers or missing you need.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon,.

  TechSurge.

• Is Windows XP automatic Driver Update Utility Download safe to use?

  Should I start the download for this automatic driver Update Utility

  for Windows XP Driver Downloads that suddenly popped up on my screen? Is it safe and legitimate?  This is the site web http://www.driverupdate.net/articles/xp_download/windows-xp-driver-downloads.php?aps=winXPtextsplit2.  Thank you in advance, Slowbutsure :~)

  Hello

  The problem with the automatic driver update utilities is they will fail all ultimately and

  sometimes with spectacular results (bad). So I recommend only utilities that help
  determine what drivers are loaded and help find sites of the manufacturer of the device
  where they are.

  This utility, it is easy see which versions are loaded:

  DriverView execution - Set VIEW of Microsoft drivers hide - update those without drain in their
  names.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• T440s lost Bluetooth after having installed the latest updated via the Lenovo system update

  Hi everyone, my setup - Windows 8.1, Intel Dual Band Wireless AC 7260 with Bluetooth built-in.

  After the installation of the last packet of Intel's Bluetooth (via the Lenovo system update), I lost Bluetooth constantly.

  -J' I tried to uninstall the update of the driver, nothing has changed.

  -J' tried to restore through Windows Restore Point (I did a fresh restore point before you install these updates,) without success...

  I noticed that:

  -When this happened, the fingerprint reader to are featured strange - there is no if light (with green light) initially, Windows, and Windows was asking me a password instead of the fingerprint.

  -In the Device Manager. Bluetooth category disappeared (I was there before the upgrade - for sure.). but I saw a new unrecognized device whose name ends with something like "(de l'énumération n'a pas pu) '-this could probably be the Bluetooth card."

  -L' tray for Bluetooth icon disappeared.

  -The Bluetooth system option submenu and its devices in the Windows settings disappeared (and it was here before).

  -Looking for Bluetooth in Windows 8.1 returned property (with Win + W hotkey) framework "set up Bluetooth devices" or similar, but when I clicked it, it couldn't access this option - just took me to the main configuration screen.

  I had to do a restore of the system using Linux (thankfully made a full HD image backup of the HDD and SSD using Clonezilla readers - that was the only way to fix this-instead of complete reinstallation of Windows).

  The only driver that works for me is the Intel version 3.1.1307.364 issued on August 1, 2013.

  -Anyone else had similar problems?

  Apart from this, the Bluetooth disconnects always happen: see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-major-WiFi-and-Bluetooth-instability/...

  Can someone give me some advice please?

  I need help with this.

  I found a solution to this problem.

  Apparently, installing bluetooth driver through update system does not install it properly.

  So I downloaded the latest driver of Lenovo driver download page, and instead run autorun.exe, I sailed to 64-bit dir and then run the installation program.

  Everything works fine now.