Satellite 200cds: schemas LCD need

I know that this laptop is really old, but I was wondering if anyone has some kind of drawings or descriptions of thread for the LCD screen. I am intended to connect the LCD to a game console.

Hello

Sorry, as far as I know Toshiba does not provide this information to the end users.

I have googled around, but can't find anything!

Good bye

Post edited by: Pelox

Tags: Toshiba

Similar Questions

  • Z930-154 satellite - backup of original need BIOS

    Y at - it nothing that someone stored ore could save and make a backup of the original bios of toshiba satellite z930-154, I need the original because my bios is damaged, and I couldn't find where else, I tried to download the toshiba website they only have the update not the original and is only 108 kb and my original bios have almost 7 mb

    If anyone can help me with a backup of the original bios I really appreciate, thanks and sorry for my enghlish

    On the Toshiba download page you can find the latest version of the BIOS for each laptop model. I recommend you update the BIOS to the latest version.

    http://www.Toshiba.EU/innovation/download_bios.jsp

  • Satellite M40-265 LCD displays the image complete but crushed

    Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

    When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

    When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
    Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

    Starting in safe mode is possible to use a display fullscreen on external

    Hello

    The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
    I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
    In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
    I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

  • I have a Toshiba Satellite C660-212, I need more RAM

    I have a Toshiba Satellite C660-212 I need more RAM but can't find this C660-212 number, can I use the closest number.

    Go here and use their memory scanner and it will tell you what you need.

  • Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

    Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
    Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
    Have you tried the following:
    Setting of various parameters in the graphics properties and in the bios but makes no difference.
    It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
    It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
    I tried to start with / without battery - no difference.
    I tried to start without the disk HARD - no difference.
    I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
    I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
    I'm out of ideas and looking for a genius to fix it for me please!
    See you soon

    Hey Buddy,

    > It turns on but not at all to see clear
    This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

    It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

    In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

    Good luck! :)

  • Satellite Pro L20 - I need a new screen and I am unable to find a part number

    Hi all

    My L20 Pro Satt needs a new screen and I am unable to find a screen with number of part corresponding to mine.

    Can anyone provide me with the other part numbers that would fit mine.

    Thank you

    I found only a display for a Satellite L25 Pro but I guess that the two devices are very similar and use the same part of the screen.
    The display part number is K000000620 and it s a 15 XGA 1024 x 768 display.
    http://www.screentekinc.com/Toshiba_Satellite_Pro_L25--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

    You also can order the compatible display. You can contact the partner of service allowed in your country to order this part.
    But be aware that the display is one of the most expensive parts of laptop.

  • Satellite A500 - new LCD cable

    Hello

    My Satellite A500-13f laptop got his damaged cable lcd and now I need a new.

    When I went to tech support, they said they found itself without a reference number on this issue, and they need the number of the room as well as the model number to make me a new cable of the LCD.

    apparently even model laptops are sometimes with different lcd screens and so different video cables

    My laptop is the exact same in this [page | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&ACTION=PRI NT_WITH_BACK & service = EU & PRODUCT_ID = 1070219]

    {color: #000000} so can you help me with the number please?
    {color}

    To be honest I don't understand the problem. Toshiba service can identify the right display and the cable for your laptop model. They can find this info in the Toshiba database so I put t understand why you need to find the part number for the service.
    > When I went to technical support
    Is - this Toshiba technical support?

  • Satellite A205 - another LCD deal?

    I am the proud owner of an A205-075023 Satellite PSAE3U, but misfortune fell upon me and my screen has cracked quite spectacular. While surfing eBay, I discovered this:

    ultDomain_0? hash = item270366462693 & _trksid = p3286.c0 http://CGI.eBay.com/Toshiba-Satellite-P105-S6024-Laptop-LCD-Screen-17_W0QQitemZ270366462693QQcmdZViewItemQQptZLH_Defa .m14&_trkparms=72%3a1234|66%3a2|65%3a12|39%3a1|240% 3 A 1318. 301 3 a 0% | 293. 3 a 1% | 294. 3 a 50%

    It fits the dimensions and the size of my screen, but is compatible with my computer?

    Thank you!

    I don't know m but as far as I know the has Satellite A205 with a 15 screen.
    So it of not possible to buy a 17 inch screen, do not.

    I think you need to look for a different view or contact you an ASP. They can order and exchange the original Toshiba parts.

  • Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

    I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

    I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

    LR6 gets to the start screen, then stops and closes the Windows7.
    I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

    I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

    I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
    I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

    My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

    No one knows what would be the upgrade of the driver I need or how can I know?

    James

    The page Intel graphics driver can be used, and you can also download the driver directly from the page.

    This CPU does support your laptop?
    What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

    The Intel download page provides a driver Intel as an exe or zip package
    https://Downloadcenter.Intel.com/

    You need to download and unpack the zip package.
    You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

  • Satellite Pro C870-172 - need new motherboard

    My c870-172 motherboard is broken, where can I find the serial number to find a spare part? and there at - it a good site to find a?
    Thank you

    The serial number of the piece is not known to me, but I think you can use most of the motherboards that are released for Satellite C870 series.
    All parts can be ordered from authorized Toshiba service provider available in your country, but note: next to the display panel, motherboard is more expensive laptop.

    I think you need to spend a fortune just to get a compatible motherboard.

  • Satellite R630-13U - driver need for the WLAN/BT function key

    Dear Sirs,

    I have problem with my Toshiba Satellite R630-13U

    I have not found any driver for the wireless hot key windows 7 pro 32-bit to be able to turn on/off the wireless or Bluetooth.

    Thank you

    Ayman

    You need to install additional package from Toshiba. Several different tools, this package, and one of them is utility of Flash cards.

    Please install, test and post comments.

  • Satellite U940 - active RAID need

    Hi, I need active raid

    As assets the raid? I have U940 Satellite PSU6SP-023LM1

    Have you checked the BIOS settings? I don't know if your machine should have these settings in the BIOS, but you can check it out.

  • Satellite Pro L50-B05D - need driver for Windows 7 WLan

    Hello

    I bought a * Toshiba Satellite Pro model L50-B05D psktaa - 001 05d *.
    I needed a new machine because I was starting a new job the next day.

    During an installation out of office 2013 the machine in one of its discounts to zero was a catastrophic error... and has refused any attempt of recovery. around 7:00 in the night...

    I needed an operational machine for work... the next day

    I took out my Windows 7 and proceeded to reconfigure the computer and install Windows 7... Machine is operational, BUT I can't get the Wireless LAN works... for the model I there doesn't seem to be a wireless lan driver...

    The functions of network card BUT not wireless LAN...

    Please can someone tell what is the right driver LAN wireless to the machine...

    Thank you

    Harpoon2222

    Hello

    Your laptop satellite L50-B05D belongs to the PSKTAA series and this series was only released in Australia.

    But the similar series of portable Satellite L50 - B PSKTAE is released in Europe.
    The drivers of the EU Toshiba driver page should be compatible.

    Visit this page:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose here.
    Laptop
    Satellite
    Satellite L
    L50 - B satellite
    PSKTAE
    Win 7 64 bit

    Note: there are three different Wlan drivers: Intel, Broadcom, Atheros

  • Satellite Pro P100: I need to remove some software before installing Vista

    My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
    Norton Internet Security
    Bluetooth Stack for Windows by Toshiba
    ConfigFree

    Toshiba has plans to release a version of Vista the last two?

    Hello

    I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

    A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

    By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

    Good bye

  • Satellite PRO U500 - LCD screen size is reduced

    Hi all,

    I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
    The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
    Is there a solution to my problem? I have to send in the audience?

    Thank you for the help
    Giuseppe

    H

    It is really strange, especially if you see the same thing in the BIOS settings?
    Since when did you notice this behavior?
    Do you use pre-installed OS original you got with your laptop?

    Have you done something that may be responsible for the issue described?

    I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

Maybe you are looking for