Satellite 2140 CD: monitor Lcd lost colors

Similar Questions

• my monitor suddenly lost color and black and white, how to restore the color

  my monitor suddenly lost color and black and white, how to restore the color?

  Hello

  ·          What version of the operating system is running on your computer?

  ·          When the issue started?

  If you use windows 7, try the steps in the following article:

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

• Is my monitor - LCD Samsung 172 T - too Bright color manage?

  Following the generous advice of forum members, I decided to invest in a colorimeter to properly profile my monitor which is a Samsung LCD 172 T.

  However, I read several messages in the forum about monitor light problems. For example - that a monitor should be less than 120 cd/mr2 brightness level to display the appropriate image, and some saying that they cannot set their monitor LCD low light enough.

  According to the specifications of my monitor my brightness of the monitor is 250 cd/mr2.  My screen is too bright for a camera of colorimeter to profile correctly?

  For a colorimeter device I was considering the eye - one display 2 or the spyder 2 or 3.

  Hi, Tom.

  As crazy as it sounds, the manuals which came with two of my monitors absolutely NOTHING say about levels of brightness, max, or min.  I can tell you almost anything else you want to know.  My guess is that you won't have a problem.

  Normally, you enter your target settings (white gamma temp, color, monitor luminance, if your software, black and luminance) in your calibration and profiling software and the software then you guide. On most LCD monitors except the most expensive, you really only have an analog control... the brightness of the backlight. The software will ask you reduce the brightness to the desired level and gives you the information when you are there.

  Once the brightness of the monitor is together (IE, white luminance), with that software will display a bunch of spots of color values, and your colorimeter read one by one.  When it's done, he'll write corrections to your video card which will adjust to your screen to satisfy your target values and give you accurate color.  It's all part of the calibration.

  Then, it will create a profile that describes the range of colors of your screen (limits), etc. Your profile will include a color lookup table or a set of color curves appropriate in any application of color management (Photoshop, LightRoom, etc.).

  Calibration is automatically saved on your video card and should remain active until your next calibration of the monitor (make every 2-4 weeks for true colors). The profile will be in the default folder where all your ICC profiles, which differs according to the o/s.

  If you cannot reduce the luminance of a correct level, you can download a software that will do it for you.  I didn't need or use this software with one of my Samsung monitors.

  Lou

• MONITOR HP PROBLEM, I have HP TouchSmart 600 PC & after closure, monitor has rows colored @ bottom of page

  I have HP TouchSmart 600 PC & after closure, monitor has rows colored @ bottom of page, I can't find a solution.

  These lines appear after that the power is stopped?  If so, then this could be a physical problem where the LCD is damaged.  Really, there is no solution in Windows.

• Loocking driver for monitor LCD 9417-AB9

  Hello! I'm loocking driver for monitor LCD 9417-AB9. Thank you

  Hello

  the monitors are plug-and-play, you should not need a driver unless you activate a feature as a webcam, etc.

  That being said, you might be looking for inf file ICM profiles. If so, you can visit lenovo.com/support and type the part number 9417-AB9, brings you to the right place to download files.

  R

• Satellite M115-S1061 - display problem - bad colors

  According to my daughter, his portable Satellite under XP - SP2 suddenly went dim. At first I thought that it would be the backlight inverter, so I got a replacement, but to change that did not make any improvement.

  Experiment with display settings it became apparent that a lot of the display of colors were not what they should have been and I started thinking about something had happened to the LCD screen or its wire causing the loss of one of the primary colors for example: Blue however, after restart I have observed a lot of blue in the diplay up to what fully loaded XP.

  Display themes and by setting to try to get a useable simple, it became more and more obvious that there is some type of ongoing video inversion.

  That said, I can't find any setting that could cause this or any similar report of this disease. I scanned for any viruses and returned only several points without results or imprivement of restoration.

  The driver has not been updated, so it there is no possibility of returning to a previous iteration and are looking for a update indicates the current dirver is the last.

  In addition, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly...
  It is not until the Office XP launch things go astray.

  Any help would be greatly appreciated that the school is in session, and I be get this resolved and getting a new laptop!

  TIA,
  Bob

  Hello

  > Also, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly... It is not until the Office XP launch things go astray.
  From your description, I think that this could be a graphics card problem.

  I would really recommend connecting an external monitor, second to this laptop to check if the same wrong colors would be visible on the external monitor.

  If the same bad colors will appear simultaneously on the second monitor then the question could be really related to a bad GPU chip

  In this case a replacement (motherboard) would be necessary

  Bye & welcome

• Satellite SP6000 - Crash with bands of color on the screen

  Hello!

  I have a Satellite Pro 6000 and it has worked well for more than two years. But in the last two months the laptop crashed at any time with a screen televisions flicker with stripes of color. After that, it takes time to make it work again. XP Pro is fresh installed since the recovery CD. Unfortunately, it looks like a hardware problem. An external monitor displays the same distorted screen. I don't think it's too hot and the fan is running and blowing hot air.
  It is out of warranty now and I don't want to spend a lot of money on a repair task.
  So, any suggestions for me? I don't mind opening and replacement/repair of certain parts of it, but it would be great for advice on a possible reason for this.

  Thank you in advance and bye,

  superberti

  Hello

  Of course, it could be a malfunction of the motherboard connector or the power.
  But to be 100% sure that you should contact ASP, because he can do a diagnostic test, and then it can give you an exactly the answer on the fault.

• Satellite A30: Swap the LCD

  Hello
  No one knows, if a form from a Satellite A30 adapts an Equium l20, my screen Equium number is LQ150X1LHS2.
  I bought as a Christmas present for my son, he has now managed to break the screen. Foolishly, I did not take out of warranty against accidental damage.

  Thank you
  Mick

  Hello

  Satellite A30 and also an Equium L20 were delivered with a 15.0 "color TFT (1024 x 768) display.
  It seems that the screens are similar, but I m not 100% sure.

  I found this interesting site:
  http://www.screentekinc.com/Toshiba-LCD-screen.shtml
  There, you can check the views

  Good luck

• Satellite A100 - 906 internal LCD does not work

  Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
  Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
  What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

  Help, please.

  > External monitor works too.
  You said that external monitor is not affected. Right?

  Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
  If the graphics chip would be affected, both screens would not work properly.

• Satellite L500D-14W - screen LCD off

  Hello

  My Satellite L500D-14W was turning off occasionally and next time when I started my laptop turn off with hdd click even before the windows logo. I open cabin HDD, has carried away HDD and reinserted + reinserted RAM. Now problem is some how my LCD is off and it doesn't restart do not even several times. I took power and battery and pressing the power button / stop for 60 seconds and then power cable and turned on the computer, but nothing happened.

  Can any one give suggest me what happened and how do I turn on LCD.

  Kind regards.

  Majo

  OS: Windows 7 32-bit

  Hello

  You see something on a screen? So you can check if the internal monitor works properly or not.

  If not try this:
  Remove the battery and unplug the AC adapter. Now wait at least one hour or overnight and then install the battery pack and plug in the AC adapter. Before you turn it on, make sure the battery is fully charged and try to boot up your laptop.

  If you have connected to external devices such as mouse, keyboard, printer, etc. remove them until you turn it on.

• HP S2031 LOST COLOR

  I like my monitor HP - but all of a sudden, he lost his YELLOW - and look funky. He did a yellowish, but when I use Paint, for example, to display the basic colors, the yellow has disappeared. It is time for a new monitor... or can it be fixed. I tried all the settings of the monitor that I could find, but without success.

  I THOUGHT about IT... for those who may have a similar problem, you may have a bad connection between the monitor and the laptop I did. Simply unplug the VGA series and re plug - plug it solved the problem.

• M17x R4 - pixels LCD green, color distortion

  Hello

  I searched the forums for a few days - my wife m17x has developed a strange question LCD. Some colors are appearing as bright red/green pixel. It is not of pixels dead - discoloration follows certain colors around the screen, if the image is moving.

  I plugged the computer on my desktop monitor and the problem goes away, which leads me to believe that this is not the card video (s)

  I have the R4 model with the graphics of enduro 7970 m, and if I spend dedicated to integrated it is indifferent.

  Security has increased in November, so I'm trying to decide how to proceed with the repair of my very expensive mobile Kaleidoscope!

  Photos show very well the problem, but I did the best I could!

  Thanks in advance!

  

  Hey, don't worry about it!

  I had the same problem as you.

  It is the problem of the IntelGraphic and of the Nvidia/Radeon GPU swith.

  All what you need to do is:

  1. turn off your laptop.

  2 Dissconect battery and cable CA of the laptop.

  3. Press button 15 sec

  4. connect the power cable (without battery)

  5. switch on your laptop.

  Hope that his willingness to work!

  BR

  tomassok

• The monitor HP 2207 color calibration

  The color on my screen calibration option doesn't seem to work on this monitor. How others have calibrated their monitor so that the printed photos corresponding to the image on the screen. I've been watching Spyder and Eyeone calibration thingys but she tips appreciated. Thank you.

  This article from hp can help:

  http://support.HP.com/us-en/document/c00850059

  Maybe try to install the latest versions of software and drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3363837

  Maybe your manuals for this information?

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?LC=en & DLC = in & CC = US & os = 2093 & Product = 3363837&

  You may need to update your video driver PC?

• Satellite Pro M30 - some mistakes of color and pixel

  The last days I had some problems with the display screen. I had a few mistakes of color-mistakes and pixels. Colors erupt anywhere on the screen, icons disappear and if I move quickly around the screen (with her pinter) ex a document in Word (Office), I have interference with some pixels/points in the text and also a strange thing as some want to erase the text with an eraser.

  But if I have to "Refresh" the sides where it happened that it is ok again, until I repeat once again. I try a few other HD is the same and I also format the HD, but it is still there (I think it might be a virus).

  Also, sometimes the display flashes until it is regular again. Sometimes, it's better or wrong.
  I guess it may be a failure of the map screen. I also get some stick photo (and rehearsals) when I use the cam on Skype & MSN.

  some hint/tip?

  Goodman

  Hello

  May I ask if you have installed another display driver for your laptop? You should only use the display directly from Toshiba drivers because they are pre-tested on the laptop.

  In addition, it would be interesting to know what happens if you connect an external monitor. You may notice the same problem there?
  Maybe reinstalling Windows can also solve this problem

  Anyway, if you need professional assistance, you must contact the service provider authorized in your country. Technicians can check your laptop. :)

• Satellite Pro P - new LCD Inverter

  I've had my laptop for about 3 years now and last week, half lower of the screen flickered for a few seconds. I never thought much of it, but in recent days, the problem has become more noticeable. I did some research autour and this isn't a rare problem, across all the notebook manufacturers.

  I've been advised to connect an external monitor to see if it sparkles in sync with the laptop, if it isn't then it's probably a LCD Inverter fault.

  No one knows how many of them would cost here in the United Kingdom, or if they are all compatible?

  Best regards

  Gavin

  Hey,.

  The exact price depends on your model of laptop and screen. Different laptops have different hardware, so there is no common converter for all screens.

  An exact answer, you can get a provider of service authorized in your country. Guys have access to all Toshiba databases so they can tell you the part number and how much it would cost.

  If you have any other questions, just after again! :)