Satellite A100 - material cannot be found via USB

Similar Questions

• Satellite A100 - WXP Recovery DVD Installation via USB

  Hello

  I have a laptop Satellite A100 and the DVD drive no longer works. I don't want to waste money on an external DVD drive. I want to install the recovery from a USB device. I copied my recovery disk image and saved as ISO.

  My window of recovery of origin is "Windows XP Media Center". I don't want Linux operating mode. : P

  I tried several methods, but they did not work for me. (Unetbootin, Ultra ISO, etc.)

  If someone could help him in any way will be appreciated.

  Kind regards
  9

  As far as I know it doesn t work on this image of the way and the recovery can be installed with the bootable recovery disk. You can not simply copy all the files on USB and install recovery image.

  This should be easy kind of manipulation that can be used on the different laptop models. Please note before recovery image installation begins the data in the recovery image and data saved on the motherboard should be compared and if this doesn't match t, you will be unable to install the recovery image.

  ODD for this old model of laptop is not expensive. You can find used one on ebay and replace it yourself. If you need assistance, we can help you.

• Satellite A100 (PSAA8) - Cannot play most of the games

  Hello

  my laptop Satellite A100 (PSAA8) cannot run most games like call of duty... I wonder if I can get a more powerful vga card and install it. Is this possible? And what I can get to the Middle East (Egypt).

  Other improvements I need to increase its performance?

  Hello

  Unfortunately the video card cannot be improved. Only you can do is upgrade RAM, optimize the preinstalled operating system and play games that need power of video not so much.

  Also try to play games with video settings below. Sorry, but that's all I can say about it.

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

• DVD on Satellite A100 player was not found - Code 39

  Bought a laptop Satellite A100-447, it was working perfectly until yesterday when the carpet * a DVD RAM UJ 850 s ATA drive is now not NOT FOUND!

  Error code Manager device is "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Help, please.

  Thank you

  Hello

  This problem sometimes occurs. It is related to incorrect registry entries.
  But today it's lucky you!

  Please check this forum thread. You will find a link to the Microsoft document that offers many solutions.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

• Re: After upgrade on Satellite A100 BIOS cannot use keyboard more

  Need help... after bios upgrade for Toshiba Satellite A100 my keyboard error... now I can't use my keyboard...
  If I used the external keyboard, as there not enough power into the USB...
  Now, how come back to start bios version...

  Thank you or any medium

  Hello

  Enter the BIOS (by pressing F2 at startup) and try to check in the Bios if compatible keyboard, legacy usb support (something like that) is enabled. It should help.
  Otherwise, playing with the up/downgrade Bios (especially, demote) instead of keyboard problem, can cause the crash of the complete system with white screen.

• Satellite A100-294: cannot change the built-in RAM module?

  The integrated RAM (512 MB) of my Satellite module problems (based on memtest86) and the machine was freezing all the time. It is under warranty, so I got to the store I bought.

  They told me that they send the machine to Toshiba AC because it will probably be a new mainboard to correct the problem, since the DIMM is permanently attached to the Board and cannot be changed as all the regular module DIMM.

  Is this true? Is the 512 MB of RAM the machine is supplied with, physically inseparable from the motherboard?

  Hello

  As much as I know doses Satellite A100-294 does not in charge of the internal memory!
  The unit simply uses the memory DDR2-533 modules that are removable.
  The memory location is placed at the bottom of the unit and it s easy to reach.

  But maybe the head technicians would like to take a look at this motherboard and therefore the ASP had to send this book to the Toshiba headquarters

• Satellite A100-788 cannot read CD and DVD RW

  Hello
  I just bought a Satellite A100-788 and can not read the CD and DVD RW (DVD I tried is a Sony) with the CARPET * a DVD-RAM UJ - 841S.

  I have downloaded the driver (v 5.0.2.5) on the Toshiba site, and tried to install it but it did not work (result is ok, but it's the previous version when I look at the properties: Microsoft 5.1.2535.0, 07/01/2001). Installation of this driver will fix my problem, or, as I read on the forums, I'm going to nead to install a new firmware version?

  Anyone know what to do exactly?
  Thank you
  Stéphane

  Have you tested different brands of CD and DVD?
  As you may know the discs don't support all types of CD or DVD.
  In my manual, I found a hint of support of the CD and the DVD.
  This media must be tested and are compatible.

  You check the manual for this list

• Satellite A100 (PSAA9E) - Cannot install the display driver for Windows 7

  I have a problem with installing official Toshiba Windows 7 x 32 ATI x 1600 driver.

  After unpacking it should run install.exe, I think, but it's not; nothing happens. Go on the Setup.exe with installation manual, then I see no Catalyst Control Center & Display Driver from the list, just the catalyst install Manager & vcredist. After installing these components (CCC & DD) are not present.

  Any ideas?

  P.S. Same problem with the official driver of Toshiba Vista32 ATI x 1600.

  Hi mate,

  You have already installed other drivers for the laptop? I mean the chipset driver, this driver must be installed first.
  And are you sure that you have ATI display driver? Some Satellite A100 models were shipped with the nVidia graphics card, AFAIK.

  Moreover, what happens if you install driver manual in device via advanced installation manager?

• Satellite A100-906 cannot boot from CD

  Hello

  I have Satellite A100-906 and can not boot from the CD. I have not now what problem.

  I want recovery my pc, but do not boot cd and I tried another CD of Windows and seems to be a problem.

  I get a DVD Super Multi drive _usb_ but does not have same problem.

  BIOS tool is default.

  Please FEM answer me

  thanx

  Hello

  You said that you are using a USB DVD Super Multi Player?

  Sorry, buddy, but I think that you will not be able to boot from the external USB CD/DVD drive
  AFAIK BIOS doesn t support this!

  You must use the use of the internal CD/DVD drive if you want to boot from the disk!

  Welcome them

• Satellite A100-766 cannot function without battery AC is plugged

  Hello

  I have two problems with the battery of my laptop Satellite A100-766.
  The first is that the laptop can run without the battery, when it is connected to the AC.
  Is this normal?

  The second is that when the battery is in the laptop and it connected to AC, battery discharge again.
  She charges only if the laptop is turned off.
  Do I have to change my battery or the problem is more serious?

  Thanks for your help.

  > The first is that the laptop can run without the battery, when it is connected to the AC.
  Is this normal?
  This certainly isn't a common behavior of mobile.

  You will need to contact the ASP and technicians should check the AC adaptor first.
  Eventually, there is only one problem with you external AC adapter or battery.
  If malfunctions of AC adapter that can not load the battery s and the laptop cannot operate without the battery.
  On the other hand a battery problem would also be possible

  That is why a call to an ASP and ask for later handling

• Satellite A100 PSAA8C - cannot install Power Saver

  Hello

  I reformatted my laptop toshiba Satellite A100 PSAA8C SK800C today and I was expecting to download all the drivers and install them.

  However, when I download the 'power saver' among the official website of toshiba, I was not able to install.
  Not only that I can not install it, nothing pop out when I click on the zip file CONFIGURATION icon.

  I have already installed all drivers for the laptop computer.

  Can someone help me?

  Thank you
  ~.~

  Hi mate

  You said:
  > However, when I download the 'power saver' among the official website of toshiba, I was not able to install.

  First of all this laptop seems to belong to the Canadian series of Toshiba and if you want to use any tools Toshiba, then you will have to download it from the page of the Canadian driver Toshiba!

  In addition, you can choose the drivers and tools exactly for the PSAA8C series.
  In many cases, you will not be able to use the tools that are designed for other series!
  We must therefore be sure that power saver downloaded has been released for the series PSAA8C.

  Welcome them

• Re: Satellite A100-410 cannot start Windows XP

  Hello

  I have a Satellite A100-410 and I can't start over (in safe mode ok). When starting, it shows the XP screen and after 10 seconds, the screen goes black. We have re-installed XP but no use. We checked again and assume that something is wrong with the video card drivers.

  So we checked for the last but no use. I can boot the laptop when the video card is uninstalled, so it takes to cause something weird.
  Or could it be that the card is broken?

  Hello.

  For sure your video card is ok, otherwise you may see white screen after switching on. The problem is in the driver problem. Have you downloaded the Toshiba site display driver?
  Maybe there is a conflict of driver. This site http://downloads.guru3d.com/downloadget.php?id=1655&file=7&evp=c14f9f3787877ee f9ef4b235b9146e96 stage
  Download and install. Then try to reinstall the display driver (if not work, do it in safe mode).

  If she's not always you help, do a search for a new iso Windows Xp but not Windows assembly (some guys like to change windows, deleting and adding some files, and then load it. Most of these modified versions are bad).

  That's all I can suggest now, sorry if does not work.

  Welcome them

• Satellite A100-237: cannot open HWSetup - common module completed

  I can't open toshiba HWSetup the MSG's (completed common module) and same for the accessibility icon.
  Note: this problem happened after upgrad my version of drivers

  Hello

  Satellite A100-237 belongs to the PSAA9E series. Please remember to use the right drivers for the good series!
  As Johnny suggested already download the common modules for this series and install again!

  Goodbye ;)