Satellite A110 restarts automatically after each stop

Similar Questions

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.

• The value of VM to restart automatically after a power failure

  Hello world

  I'm under vSphere Client 4.1.0 and VMware ESXi 4.1.0. I'm having a problem to find my vSphere client where to change the VM to restart automatically after a power failure. When we have a failure someone must manually start the virtual machine. I want that it automatically starts up on its own. Where can I change this to? I looked around the client with little success...

  Thank you for your time and help

  on the ESXi host go to the tab Configuration - setting Virtual Machine power - properties (top right of the customer)

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Satellite A110 - 195 PSAB0E - sound card stopped working

  Hello
  My sound card has stopped working it was working fine but suddenly the sound quality started weak and, finally, it stopped working I tried the following methods:

  Realtek is audio by default

  Control Panel / sound & Audio devices / Audio tab / Sound click play on arrow down and check that the audio OK is selected. In general, the problem is they something like "modem line 0 playback" could have been substituted the right audio device. (Did not work)

  Chipset utility - install (Did 'n' t Worked Aswell)

  Start/Control / Panel / Administrative Tools / Component Services / a separate window opens in the left pane click Services (Local) of the tree / scroll down to Windows Audio service / if the service is disabled or manual right-click > select Properties > under Startup to automatic Type change > click on apply / click Start > OK Reboot. (Worked) But first the quality was not as he was before and sound card then stopped working again.

  Try a file system check
  go to run - Type "sfc/scannow" without success.

  I installed windows again, but without success. :(

  Here is the detailed model no. Satellite A110-195

  PSAB0E-00F00KAR

  Windows XP Home Edition SP2

  If I understand you right you have just updated the chipset utility, but in this case, you must update the sound card driver.
  You can find the Toshiba site, so check that!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, I would like to try a BIOS update and then you'll see if it works or not.

  You have yellow exclamation marks in Device Manager?

• Satellite A60 restarts automatically displaying a blue screen

  I have a Toshiba Satellite A60 two years old, recently, I noticed a problem where suddenly the computer restarts automatically, in the first, showing a blue screen with white text for a glimpse of a second. Also what difference does update the BIOS?

  Hi Mustafa

  The blue screen of death appears usually due to hardware failure or serious malfunction of software.
  These two issues are possible on your device.
  Please see this FAQ Toshiba on disabling automatic Windows XP restart after a system failure:
  http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

  If the error message appears again, so you can see all the details of this message and then it should be possible to detect the reason why it happens.

  PS: Extra, you can try to recover the laptop with the restore CD provided. Maybe this will solve this problem.

• Satellite A110 - BIOS password after update BIOS interruption

  Hello

  I have a Satellite A110, I did a flash update using the Phoenix utility within windows XP. Upgrade flash my office, I need to disconnect the battery to be placed to restart the laptop. After that whenever I try to turn on the laptop it ask me a password on the BIOS but I never put a password in the BIOS.

  How can I please?

  See you soon,.

  David

  Hello David

  I believe that no one here can say with certainty what was happen exactly after the update of the BIOS. The fact is that the BIOS password can be removed by service provider only. Contact the nearest service provider and explain the situation.

  I'm sure they can know what was happen exactly and help you remove the BIOS password.

• Satellite A200 restarts continuously after Windows update

  Hey all,.

  The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
  Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
  Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
  Try to restore to a point before the blackout failed for an unknown reason (gave an error).
  Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
  The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.

  Someone has any idea how to fix the computer without having to reinstall windows? No matter what?

  Thanks in advance,
  Ofir

  Hello

  I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
  The fact is that a BSOD can be caused by hardware error, but also a serious software problem
  In my opinion, something went wrong during the update

  If you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem

  I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem

• Vostro 3500 restart automatically after a

  I have a Dell Vostro 3500 which restarts automatically once I have stop my laptop and unplug the power cord.  I also observed that light scroll in "keyboard and device lights" stays on. The only solution I have is to force the judgment that it restarts and then remove the dough every time.

  Wondering if anyone in the forum also seen this sort of question and have a solution.

  There is no error of this combination LED codes in Vostro™.  I also shot "Automatically restart on error" in the Panel.

  Hi riteshgarg,

  I recommend diagnostics currently running on the computer (restart the computer now the FN and the power button). Let the full diagnosis and Note If you find any error message.

  In addition, check in SafeMode with network. Restart the computer and press F8 on Dell logo and select Safe mode with network. Check to see if the same problem persists.

  Waiting for your answer!

• Computer restarts automatically after selecting the Hibernate mode

  Title: Can't put my computer in hibernation

  Hello
  After that some windows updates I can't put my computer hibernate more. When I put it into hibernation it will restart automatically, I tried a lot of solutions on the net and finally had to re - install fresh copy of windows 7 and it worked for a while, but after a few updates Windows it is no longer possible and I checked the settings and no change, so if anyone can help please do!

  Specifications of the computer.
  CPU i7-2700
  8 GB RAM
  Windows 7 64-bit
  HARD DRIVE 500 GB

  Hello

  I suggest you to check the BIOS settings to make sure that sleep and Hibernate settings are enabled.
  For reference:
  Check why I can't go back to sleep or Hibernate options on my computer? category and check if it helps.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  Hope this information helps.

• Whenever I try to go into safe mode, my PC restarts automatically after a few seconds.

  I use Windows 7 Enterprise edition (64-bit)
  Normal mode/start works fine.

  Hi mcalix,

  It is one of the locations where you will be able to disable the auto restart of the system failure. The other location is, as the computer starts, press F8. In the advanced boot menu, select the disable restart automatic option on the system failure.

  I also suggest you check the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  I also suggest to check if Windows 7 is compatible with your computer hardware.

  Whether your hardware is compatible with Windows

  http://Windows.Microsoft.com/is-is/Windows7/find-out-if-your-hardware-is-compatible-with-Windows

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Hope this helps and keep us posted.

• Folder permissions resets automatically after each reboot

  Hello

  I have windows 7 x 64 user. There is a problem with google reader I need different from that of the default permissions for C:\Users\\AppData\Local\Temp. I changed the permissions in this way: make a right click-> Security-> advanced-> permissions-> change approval-> clicked on include... inherited permissions and replace the child object permissions... Also, the folder option, I changed the hidden folders. However, after each reboot, I see not hidden files (hidden folder option resets to do not show hidden file) and permissions for resetting folder above. What causes reset of the changed properties? I have no optimizer tool except ccleaner. I use mcafee antivirus. I think that mcafee is unlikely to cause this problem. 
  How can I solve this problem? I tried to make the batch file that runs boot, but I can't use option "inherit permissions". I give you the batch commands:
  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F
  But these commands do not work to change the permissions in the manner described above.
  Help, please. Really need help.

  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F

  But these commands do not work to change the permissions in the manner described above.

  Help, please. Really need help.

  There was a similar post last week which unfortunately has fizzed out (as do about 95% of all messages...).  Maybe you can gather enough energy not only to track down the source of your problem, but also post an answer here.

  The following commands do not work:
  takeown /f "%Temp%" /.
  Cacls "%Temp%" / t/g everyone: F
  (answer Y to the prompt)
  And Yes, I know cacls.exe is deprecated. But it still works!

• Safari restarts immediately after you stop smoking, or to quit the Force

  I have a problem whereby Safari restarts immediately whenever I quit the app, either through the command-Q or via force quit. I can always restart my laptop when it's market (and Safari does not immediately restart after restart), but sometimes I want to close Safari to remove distractions or save battery. I disabled all Extensions of Safari, but that did not fix the problem.

  An additional bit of weird behavior, it is that once Safari restarts after resigning, the browser window is hidden until I Alt - Tab to Safari.

  I heard that the SIMBL plugins can cause this happens. The only thing I've had has SafariStand, that I uninstalled it a long time ago (and I see all the entries of SIMBL in the Application Support folder or in the activity monitor).

  I use Safari 9.0.2 in El Capitan 10.11.2 on a Late-2008 aluminium MacBook (5.1) with a self installed 240 GB SSD and 8 GB of RAM.

  Any help would be greatly appreciated. Happy to share the newspapers/screenshots. Thank you!

  Chris

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Computer restarts automatically after closing down

  * Original title: when I shut down my pc automatically restarts it? How can I fix?

  When I shut down my pc automatically restarts it? How can I fix?

  Hello

  1. you get any error message? If Yes, what is the full error message?

  2 has there been recent changes made on the computer before the show?

  Please try to update us with the results and the methods provided below.

  Method 1: Open the power Troubleshooter and check.

  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

   

  Method 2: Run the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 3:

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Follow these steps:

  a. Click Start, type regedit and press ENTER.

  b. navigate to the following location:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  c. double-click "PowerdownAfterShutdown"

  d. then, change to "0" if it's '1' OR

  Change it to '1' if it is '0' and press ENTER.

  Then, restart the computer and after that it restarts, try to quit again.

  If this does not work, make sure that you change the value in regedit back to what it was originally *.

  For more information, see the article and check.

  Turn off your computer properly

  http://Windows.Microsoft.com/is-is/Windows7/turning-off-your-computer-properly

  Let us know if it helps!