Satellite A135-S4467 - LCD is dim - external monitor is fine

Similar Questions

• Windows XP on a Satellite A135-s4467?

  Can I install windows xp on Satellite A135-s4467? I ask because at the toshiba page are the only drivers to this model for windows vista and I can't find for xp.

  Thank you much for the help.

  Post edited by: chimeravirus

  Hi Mateusz

  First of all I hope that you know very well you have a model of cell phone US and if you need some drivers, I recommend using Toshiba support page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  Otherwise, you have to understand that the priority for each company of PC is upgraded and not downgrade. Because of this there is no support for Windows XP Home edition. Not yet.

• Video extension on Satellite A135-S4467

  Hello

  I have a Satellite A135-S4467 and I would like to upgrade the video for other best car video NVIDIA or ATI. Is it possible and where can I get the car video?

  Can I use another brand bike video car ex (NVIDIA some other laptops)?

  Hello

  Unfortunately mobile construction does not update video card. The graphics card is part of the motherboard and may not be exchanged or upgraded.

  As you know on desktop computers something like this is possible, but not on mobile computers. I'm sorry.

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Satellite Pro A200-CH7 - flickering on external monitor

  I have a Satellite Pro A200-CH7 and have the same problem with my external monitor.

  It's a Viewsonic VX2262WM of 22 "and I see flashing on the screen. I tried the monitor on another laptop and it worked fine.
  The question is the graphics of cards my Toshiba laptop.

  Hello

  Perhaps twinkle could be linked to bad land?
  Sometimes, this could affect the external display.

  Please check if the problem goes away if you unplug the adapter from the laptop

  Welcome them

• Satellite M30-S309 - certain proportions on external monitor not right

  Hello world.

  I have a Satellite M30-S309 that I just started to use it with an external monitor: a 191EW9 of Philips, which has a maximum resolution of 1368 x 768. The built-in monitor is 16 "; the new external monitor is 18.5 ".
  The computer has the driver for the new monitor, but with a few photos of the proportions are obviously not right.

  Anyone know of any way to solve this problem? Or it's an old computer like this all simply not up to handle this type of monitor?

  A solution would be much appreciated.

  Hello

  Can you please explain what you mean with certain proportions are not suitable?
  You can choose the native screen resolution of the external display or use another resolution of the screen?

  To me that sounds like this, you use a wrong setting. On the screen you can change the width, height and to this day. You should check these options.

  Welcome them

• What is it's ok to keep Satellite U500 closed while using the external monitor?

  Hello

  I have a Satellite U500.
  At home, I use a monitor and a keyboard. So I closed the laptop while working at home.

  I can do this, or would it damage the display or otherwise hinder ventilation properly somehow laptop?

  Thank you very much for your answers.
  Thierry

  Hi mate

  Of course, you can close the lid when the laptop is connected to the external display.
  I have a Satellite phone as well and it s connected to the external monitor.
  I also have a USB keyboard.

  I use the external keyboard instead of the internal keyboard for laptop and the cover is too firm

  Don t worried if he of ok!

• Satellite A215-S7414 - no signal on external monitor

  I have the model A215-S7414 and the LCD screen is broken,
  So now I have a 2nd moniter "run the image" for my laptop

  The image is available by loading microsoft and F2, F8, F12 logos
  However, to start the laptop I always had disable driver signature enforcement to get to the point where I can access Windows

  I hear the laptop that windows has loaded, but the moniter automatically stops and says 'no signal '.
  the monitor is an Emachine E19T6W

  I ran a start-up repair, don't know if it's relevant, but he says
  "unspecified system configuration changes may have caused the problem.

  so, if you please help me.
  I would gladly appreciate it willingly

  Hi mate

  The only option that could be useful in your case is the use of the FN + F5 key combination.
  If this key combination function, you should be able to switch the video output to an external monitor.

  But if the FN + F5 combination doesn't function then I put t see no other workaround to the release of the video on the external monitor, how do you want to change something if you n t see anything on the screen?

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Re: Need drivers Vista for Satellite A135-S4467

  Hello

  I need drivers for Vista and Xp drivers for A135-S4467 laptop, but there is no A135 on the official download for toshiba site. Pls tell me where I can find them and tell me if my lap top can use Win XP.

  TNX need your quick help you can!

  Martin

  All the drivers, tools and utilities that you can find on Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  YOU have the laptop model US and it is not listed on the page of European support.

  Good bye

• Can't get the drivers for Satellite A135-S4467

  I do something wrong, because I can't find a way to get the drivers for my laptop.

  No matter what options I select on the Toshiba supports site driver downloads, I can't find my model.
  It does not seem to exist in the series, or sections of archives.

  Will be it someone please tell me where I can find the drivers for my A135-s4467? (PSAD0U)

  Thank you

  Jeff frustrated.

  I think you have a USA model.

  Try this site: http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

• Satellite L500: internal display is dead - external monitor is ok

  I haven't used my L500 for about 6 weeks
  I tried to start it yesterday only to find "dead".

  I charged the battery overnight and I tried again this morning to find that my screen does not work.
  I plugged an external display that works, then I tried FN + F5 to switch between screens.

  The pc now only works in safe mode

  Help

  Hello

  It looks like a malfunction of the internal display.

  If the external monitor works properly, then I guess the graphics chip is ok too.

  In my opinion, there must be something wrong with the internal display.

  What do you think?

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.

• Satellite A300-15J - picture freezes on external monitor

  Hey there,
  I have some problem with ATI 3470HD. recently I bought the TV Samsung 2333HD LCD, when I connect it with Notepad (as the main and only monitor) in some images of minutes simply to freezes and goes black for a few seconds. It's like graphics card would be reaload itself (tried on several resolutions). I tried to connect the LCD TV to the PC, and it works. However, it is interesting that I also tried to connect the laptop with the other LCD TV and it worked great.
  There is another question, is it normal that 720 p HD video freezes?
  I think laptop seding for sevice. By the way, I tried 3DMARK and also VideoCardStabilityTest, all good. Any idea?
  Thankx.
  Andrew

  Hello

  It's not easy to tell what is the reason for this...

  Before that you sent it to the service center, I will try to update the display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried another cable? Check it!

  Welcome them