Satellite A30 714 bent pin USB

Similar Questions

• Satellite A30 714: cannot read certain brands of media data

  Hello
  I have a combo of teac dw 224th player and I can't read data from some brands of media, is my disk pack or are my incompatible disc with the drive of the brand main problem is bulkpaq.
  I used to have an external dvd burner and they all play fine but he quit and I can access is more than 70% of my discs on my dvd - rom integrated that it is show the disk as empty, or they will not be read at all, but I know that there is information on them I used with my external hard drive.
  Please help I have some info very important I need to recover...

  Thanks in advance steve...

  satellite a30 714 with p4 3.06 ghz processor, 512 MB ram ddr running windows xp home service Pack 2 installed.

  Hello

  To my knowledge the reader doesn t supports all CD o DVD media. It s a simple fact.
  As far as I know, you will find a list in the manual use of compatible media and supported that are tested and it functioning properly on this player.
  I use a media TDKs and I m very happy. Pease check other manufacturers of CD and DVD.

  Good bye

• Satellite A30-514: problem of USB after you installed Windows XP SP2!

  I have a satellite A30-514. I clead the HARD drive, reinstall the software from the recovery CD I got with the PC.
  After that, I launched Windows updates and installed SP2.

  But now my USB only recognizes the mouse and nothing else, when I try to connect a device told me that there was an error on the data and the installation cannot last. I tried reinstalling the driver from chipset from the CD, but nothing happened.

  Hello
  Service Pack 2 does not have hardware redetection of embedded devices. I have the same problem on my S5200 and I just refresh the Device Manager, and after that, it was all right. So, try this one.

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• Satellite A30 714 cooling fan noise

  I have an A30 714 and due to the high temperature of the portable computer, the fan is on 90% of the time. It is very noisy. It is also the energy consumption when working with batteries. Does anyone have a suggestion about the possible problem and solution?

  Thank you

  Hi Fernando,

  From your description, I suspect that there is some malware running on your A30 which is causing the CPU to process at a higher than normal rate, so the high activity of the fan and the autonomy of the batteries.

  I suggest that you scan your A30 for virus/spyware/malware, etc. using a utility such as ADAWARE and SPYBOT (both are free and can be downloaded if you have not already installed).

  I also suggest that you start the Task Manager and check exactly what percentage is actually using your CPU and what services/applications are actually being run.

  Kind regards

• Satellite A30-514: no driver USB

  Hello, first post here so be gentle please...

  Just re-formatted your laptop Satellite of friends as he managed to corrupt the windows, but we have not formatted to a non-original disc so no drivers etc - my problem is the USB driver. I'm using this link USB Driver
  Microsoft Windows 2000 5.1.2600 support page, but I cannot get his execution.

  When I click on it or run I get a set of icons, but none of them are setup etc., and when I click on the icons of all kinds of strange data appear.

  To sum up: no driver USB; has got the folder but cannot run files - help me please :-)

  Thanks - Mamoun

  Post edited by: Mamoun

  Found http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=ex&bbid=bb55&url=& dialogid = 11350459 & stateId = 1% 200% 2011352178 on the forum here and it works - thank you. BB

  Hello

  Thanks for the information and it is nice that you have solved the problem.

  PS: Welcome to our community ;)
  Good bye

• Satellite A30 714: external monitor displays in 640 x 480 only

  I am trying to connect to an external LCD monitor with a native resolution of 1280 x 1024. When I plugged the screen plug-and-play Windows XP installed, now when I switch to the screen of the laptop to this screen (or running dual screen) it will be the only display at 640 x 480 and does all of the options in the graphic properties to change the resolution.
  But, if I use the external display as extended desktop, then I'm able to put any resolution I want upward and above 1280 x 1024.
  I am running XP Home and I have installed the latest graphics drivers from Toshiba.

  Can anyone offer advice please?

  Hi Derek

  It's very strange. If the correct driver is pre-installed to avoid any problems. If you want to use just external monitor using FN + F5 to change the Office externally and then change the resolution (the number of screen 1 must be enabled).

• ADSL Wireless with my A30 714

  I have a Satellite A30 714 and have recently installed ADSL. How to use the Setup wireless on the laptop without having to plug into the ADSL?

  Hello

  If you want to connect your laptop to the internet using the Wi - Fi connection you need a wireless card on your device and a wireless router. I don't know, but as much as I know about satellite A30 there is no wireless card. The best solution is to use a PCMCIA wireless card. It's not expensive and it is very easy to configure.

• Re: Configuration of the good BIOS A30-714

  Hello

  I download the BIOS update form my netbook (Satellite A30-714), but it's an exe of win. I try to update the BIOS without BONES. How can I do this?

  Any sugestion?

  Thanks for your help.

  Hello

  The BIOS available on the page of the European pilot Toshibas is a Win-based BIOS.
  Therefore, run the Windows system BIOS update.

  But you can also download the BIOS of the page of the American pilot.
  [Satellite A35-S1592 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=512378&r pn = PSA30U & modelFilter = A35-S1592 & SelCategorie = 2756709 & selFamily = 1073768663]

  You will find the victory and back based BIOS.
  Toshiba Satellite A35 - S1592 (PSA30U) is the same series as Satellite A30 - 714 (PSA30E).

  PSA30U is of American and European series PSA30E series.

• Satellite A30 213: broken in the power supply pin

  I have so many problems with this.
  I'd rather put it in the trash than to fix it, but unfortunately I have important documents that I have not saved.

  Basically, the PIN into the Jack of the laptop is broken and I can't be able to my laptop and my battery is running out of power

  The battery is in the battery-compatible A30 - 213 in the A30 714?

  And someone has other solutions?

  Please answer as soon as possible

  Hello

  First of all a few words about the battery.
  If I m not wrong not the Satellite A30 213 uses the same battery as the A30-714.
  Therefore, you should be able to use the same battery in both units A30.

  With regard to the question on another solution.
  Well, there is only one real solution. The power supply needs to be replaced.
  I m not sure if it s only plugged or soldered on the map. However, I recommend you contact the ASP in your country for assistance.
  This should be always replaced by a mobile technician because the dismantling procedure is very delicate and difficult.

  Best regards and good luck

• Need drivers for Satellite A30 USB

  Hello
  I use the laptop satellite a30 with win xp, I lost my recovery CD and I can't download the driver usb on toshibas website.
  Please help me please
  greetings and love
  ToyGun tek

  Hello

  As far as I know USB driver doesn t exist. Is there any problem in Device Manager?

• Belkin USB Hub does not work with my Satellite A30

  I recently bought a belkin usb hub high speed and I can't make it work on my satellite A30 properley. I was told it was something to do with the standard devive Manager improved! I was told he shouldn't say that, but not how to solve this problem? any ideas?

  Hello

  Is the USB hub with external power supply.
  Because without one, it may be that the A30 does not provide the tension that the hub needs!

  Good bye

• Satellite A30 series can boot from USB external HDD?

  Hello

  I have a satellite a30 series laptop. Anyone know if I can boot from usb hard drive? My bios has an option to boot from removable devices. I want to install linux but my laptop has only 30 GB of internal space and most of that is out of stock, that's why I want to install and run linux from a disk usb external hard.

  Thank you

  As far as I know that something like this is not possible. To see if anyone has any other theories. ;)

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• I can't use my USB ports on my Satellite A30

  I tried to upgrade Windows XP Home to XP Pro on my Satellite A30, but he would not then allow me I formatted the hard drive and installed XP Pro on a drive and then installed the toshiba utilities and readers from the disc supplied. But now the laptop does not recognize my usb ports and I can't install my rinters and other prepherels. Can someone tell me please how to fix this? I have to re - install the XP Home again?

  Thanks a lot for your help in advance!

  Hello

  Have you installed Service Pack 2? What is with power supply for all your external devices? They have own adapter?