Satellite A300-1i4: FN + F8 only controls the BT and no WiFi

Similar Questions

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• I need driver XP for Satellite A300-1I4

  I need drivers for Toshiba Satellite A300 1I4 XP

  Can someone help me?

  Hello

  It is fairly easy to get drivers for a Toshiba laptop.

  Have you searched the Web from Toshiba site? You will find all the drivers:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  => Laptop-online Satellite-Satellite A300-online Windows XP online

  Good bye

• Satellite A300-20 q are not on the tech support page

  Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

  Hello

  I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

  This model was released for the Russia market.

  Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

  Welcome them

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• I want to control the speed and direction of a motor continuous using labview with pwm

  I want to control the speed and direction of a motor (essentially a toy motor) continuous generating a PWM signal in labview. I'm using L293d motor and exit DAQ-9472. Can I do this without the help of any microcontroller but only a simple labview code and the DAQ 9472 output

  There are many examples on how to generate a PWM on one in the buffer, or on a counter, but that does not support this card.  A 8 a cDAQ chassis also a BNC connector that can be used as a counter as well.  These examples can be found in help > example Finder in LabVIEW.

  Also be aware of your current limiting.  This card can drive a decent amount of current, but it has its limits.  You'll want to put an inline meter to see what is current and see how far you get to it.

• How do you control the position and size of the images, IE. photo to the printer?

  HP Officejet 8600

  Windows XP

  I'm trying to figure out how to control the position and the size of the photos or photos that are included in an email that I send to my printer via HP ePrint.

  Hello. The process that I mentioned using Word provided that if we were send emails to the printer from a computer. If you just transfer emails from the iPhone to the printer there is no option to control the position of the jpg print. This isn't something that can be handled right now on ePrint.  The attachment will be printed on a separate page. The body of the email will be printed separately of the spare part.

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?

  My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?... the titles of the first and the last burn, but the tracks between say ERROR OCCURRED, it was working perfectly last night!

  original title: Windows Media Player does not burn!

  Hello

  1. What is the exact error message you get during combustion?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: Run the Fixit and see if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2: perform the steps mentioned below and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Click on the link mentioned below as reference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope this information helps.

• Is it possible to control the opening and the closing time of a script by an officer being connected?

  Hi Experts,

  We currently use scripts UCCX 7.0 with opening and closing hours of CSQ controlled via defined under the time of day in the script.

  I would like to know if it is possible to control the opening and the closing time of a script based on an agent is connected or not?

  So basically, the office is deemed open when an agent is connected and deemed closed when there is no connected agents regardless of the time.

  If possible, can you kindly point me in the right sense of how implement this corresponds to the script.

  Kind regards

  THERE.

  Hello

  Sure... in short:

  -Use a step "to obtain the statistical report" to see how many officers is connected, or "ready" (your choice) and store that in an int variable

  -If this > 0 then 'goto' your behavior variable open.

  -If it is 0 or - 1, then goto closed.

  Aaron

• How to use the same point of view as read only in the ADF and editable

  Hello

  How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

  -James

  Hello

  Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

  From slide 14, that's where your use case comes into play

  Frank

• Can only see the first and last frame of the item in the editing HELP PLEASE

  Hi, my first time and I find an answer, but fails. I first elements 4 and I'm trying to worm. 9. in version 4 clips in the timelin shows all the frames, but in ver 9 it only shows the first and last frame clips. Is it possible to make all the images to display. I mean by "all frames", clips from filling with frames. I wanted to see all of the images in the scenario, it is easier for me to select and cut the pieces on.

  My features are Core 2 Duo 6750, Nvidia 8600GTS, 4 G of Ram and Vista Home Premium. 3 HARD DRIVE 3 TB.

  Thank you for having responded

  Werner

  Werner,

  Welcome to the forum.

  In the header of the video track, there is an icon for Clip thumbnail display. It's a cycle, and you can scroll through the Modes to display the first frame, first & last, all, or none (name of file only). In pre 4.0, it's on the far left in the header of the track. I guess that's about the same place in pre 9.0.

  Good luck and hope that helps.

  Hunt

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• Will not activate the touchpad on Satellite A300-1I4

  Hello

  I disabled my touchpad when I had the Vista that achieved with the PC, but I formatted and installed Windows 7 top and now I can't seem to activate the touchpad.

  I tried Fn + F9 or through the Synaptics pointing device settings, but no luck.

  Stats:
  Toshiba A300 1I4 - PSAGCE
  Windows 7 Ultimate x 64

  Hello

  Have you created the recovery disc before you formatted the laptop?
  If so, use this drive, enable the touchpad, and then reinstall Win 7 ;)

  Have you tried to activate the touchpad in Control Panel-> mouse-> other devices?
  Check this too

  There should be an option that should control certain properties of the touchpad.