Satellite A200 PSAE0E - no display after the update of the BIOS has not

Similar Questions

• Satellite C660D boot - update of the BIOS has not

  Hello

  In recent days, I get a blue screen of death with the error 'whea_uncorrectable_error', I read something about the BIOS update, because the error is probably caused by the previous version of the BIOS. I gave the updated correctly, but as soon as restarting my laptop, nothing has been started.

  The fan and the keyboard work but nothing else. I tried to remove the RAM, remove the CMOS battery, pulling on the battery and holding the power button, but nothing seems to work.

  Can you please help me and tell me how to recover my BIOS?

  because the error is probably caused by the previous version of the BIOS.

  Older version of BIOS does not BSOD... cause the BSOD appeared during the last day, but I guess the laptop worked correctly in the past under the old version of BIOS... the BIOS could not the problem here...

  However, the fact is that the laptop is dead now... probably because the update process was interrupted due to the BSOD...

  From my point of few the EPROM has to be re-flashed again using BIOS crisis disk...

  Some people tried to solve this similar problem using the 3rd party crisis disk (use forum search the crisis disk to find similar topics), but it still does not...

  That's why I think that in most cases only the Toshiba ASP may be able to reflash the EMPRO using the original disk of crisis

• Satellite A300-1ID - no display after the update of the BIOS

  HELLO GOOD EVENING,.

  I HAVE this TOSHIBA SATELLITE A300-1ID, as described above, happens them have BEEN updated THE BIOS AND everything to HIT PC turned off and there is no power were all CURRENT PIC BY me UNLESS I get TURN OFF AND NEVER HAD ANY IMAGE or EVEN RELIANT YEAR EXTERNAL SCREEN to.

  BUT IF YOU TURN on THE PC NORMALLY, THE COOLER STARTS AND IS FUNCTIONING NORMALLY, THE CD and DVD DRIVE AND HARD DRIVE AND THE LIGHTS have ACCESS, so DO NOT image on-screen, already tested RAM MEMORIES HAVE an OTHER TOSHIBA SATELLITE OF MY WIFE AND WORKS WELL, I despair A PC because I NEED TO WORK AND NOTHING to TALK WITH computer THAT TELL me WHAT COULD BE THE BIOS or graphics HIGH card.

  THANK YOU NOW AND WAIT FOR YOUR ANSWER

  Hello

  Seems that something was wrong during the update of the BIOS
  For me it s really amazing because something like that never happened to me and I have updated the BIOS very often

  What to say that you will need additional assistance of Toshiba ASP. I think that the ROM module must be flashed once more using a disc of crisis.

• Satellite A210 PSAFGE - no display after the update of the BIOS

  Hello!!

  I have Toshiba A210 PSAFGE. I have download BIOS OS from Vista to Xp and flashing.
  When I tried to upgrade the BIOS setting, the system frozed.

  I reformulated the system using the power button.
  There is no display on my screen when restarting.
  I tried to restart by pressing F1, F2 and even removed the battery, adapter for a while, until what there is no display on my screen.

  I even tried connection and an external monitor, but that also there is no display.
  At the moment I don't have any sort of recovery disk.

  I would be very happy if someone could help me.

  Boyfriend... You should not have put off your system by updating the bios...

  Closest contact center toshiba to recover such problems...

  Sul

• BSOD on Satellite A200 - 1 m 8 after the release of the standby or hibernation mode

  Hey...

  I have a laptop: Toshiba Satellite A200 - 1 m 8 OS: Win Xp Sp3

  After taking over my computer in standby or hibernation, I got the blue screen "appeal of dysfunction - parity error - hardware your... provider etc..." »

  I checked my GPU drivers updates and checked the memory RAM models, but all seem ok.
  I also put the count to run with the base of msconfig drivers but wtihout any positive results.

  Any idea what the problem might be?

  ....

  Hello

  As far as I know on the Satellite A200 BIOS should be updated to the version of the BIOS Win XP if Win XP has been installed on the machine.

  Update you the BIOS to the version of Win XP? If this is not the case, this->.

  I searched a bit on the pages of knowledge of MS for some details about this error and found this page:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q222973 &

  Microsoft means that this error could be related to the failure of hardware.

  This could be fair and I think that in this case, you must contact the ASP in your country to verify the keyboard and the touchpad.
  Maybe the parts should be replaced.

  See you soon

• Satellite A200 - 28H - update of the BIOS has not

  Hello

  I have a Satellite A200 28 h.
  -----
  {color: #ff0000} * I try to upgrad my bios of my laptop froze I turned it off using the highlight of power
  * now its dead please help me to save my pc *.

  {color}-

  {color: #ff0000} System properties:
  {color} {color: #ff0000} Manufacturer: {color} TOSHIBA
  {color: #ff0000} Product: {color} Satellite A200
  {color: #ff0000} Version: {color} PSAE6E-0GL045FR
  {color: #ff0000} Serial number: {color} 38258574K
  {color: #ff0000} Identifying unique universal: {color} 5FDE397F-EFCD11DC-91D0001E-EC32FB26
  {color: #ff0000} Startup type: {color} power button
  {color: #3366ff} Properties of the motherboard {color}:
  {color: #ff0000} Manufacturer: {color} TOSHIBA
  Product: ILHAM
  {color: #ff0000} Version: {color} 1.00
  {color: #ff0000} Serial number: 0123456789AB {color}.
  I downlod this bios: [update of the BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 738 & langua ge = 16 & selOS = 26 & selType = 4 & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = 45 & 1 6 = selectedLanguage & type = 4 & page = 1 & FROM = vista & ID = 66222 & DISO = 26 & pilot language = 42 | bios] -.

  Driver details
  To download your chosen file just click on the file below. When prompted, select "Save this file to disk" and select "OK".
  The file will then be downloaded and saved to a location specified on your computer.
  Downloaded files can be opened and extracted using WinZip (select the WinZip link to download a copy of WinZip software).
  See below or check the contents of the zip for installation details. [Update to the BIOS: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1] [Return to the download page of Driver: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1]

  FTP - URL [| http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] [calleula.asp? ID = 66222 | http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] Date last modified01/21/09CompanyToshibaTypeBIOS WideDescription 1906Version2.60 - WIN32LanguageUniversalCountryWorld UpdateSubtypewindows-basedSize (KB)

  This Bios update adds functionality to your system. {color: #ff0000}
  This Bios is only compatible for portable computers with Windows Vista! (32-bit only!) {color}

  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)
  For the detailed update information please see [Information update BIOS Toshiba | http://www.toshiba-tro.de/biosinfo]

  ModelEquium A200 (PSAE5), {color: #ff0000} Satellite A200 (PSAE6), {color} Satellite Pro A200 (PSAE7), Equium A200 (PSAE8), Satellite A200 (PSAE3), Satellite Pro A200 (PSAE4) operating systemWindows Vista 32 bit

  How do you do if your laptop does not start and if there is no action of the machine?
  I just think only technician ASP could help you maybe the motherboard (ROM chip) is not dead, but it can check only the technician for laptop

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Ports Satellite A135 - S2306 defective USB after the BIOS update.

  OK, I searched all over the internet and not found anyone else with this same problem, or anyone with a solution that worked for me.

  A few weeks ago, I had the common error of the BIOS reset itself and asking for a password at startup. I took my local Toshiba authorized repair center, and they have not taken care of him, no problem.

  Since the resume, however, all 4 of my USB ports have been going crazy. What happened in the following three steps (in order):
  -One of the ports does not work at all, won't provide any current or even recognize that nothing is connected.
  -The 3 remaining ports are now only recognized as USB 1.1 ports, not USB 2.0 as they were before.
  -Now, only a very small number of my devices is not at all, with three USB mouse and two unrecognized hard drives work (I get the error message "USB device not recognized" standard Windows when I connect them to one of the three ports).
  I am running Vista Home Basic (32 bit) with SP 2 and the new version of the BIOS is v1.60.

  Is this something people of repair caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  The old Duke

  Hello

  > What is the repair people caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  It is not easy to say. I think that would be best to ask guys why it happens or what they have done in the past.
  But have you set the default BIOS?
  Please do; access the BIOS (by pressing F2). Set it to default by pressing F9 (I guess) and save the changes. Restart the unit.
  Access the Device Manager, and then remove all hubs USB and commands from the list of devices. After that reboot the device again. Windows should recognize the devices deleted again.

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Satellite L450D - nothing else happens after the BIOS update

  Toshiba Bulletin Board recommended 1 new message. Downloaded updated BIOS available. Frozen computer during the update and what would not be it. Now, the computer is totally dead. Power light turns on when the connected external CAP but nothing else. I did follow the instructions specific to Toshiba. Pleas advise.

  Thank you
  adrianevans

  Hey,.

  It of strange that the BIOS update gone wrong, because I already did several times and never had a problem did you run background applications they probably blocked the update?

  Anyway, what you can try is to remove the battery and the AC adapter / CC for a few hours. Then reconnect and try to boot up your laptop.

  In the worst cases the ROM module needs to be reflashed, but an authorized service provider can help you get rid of this problem. :)

• Satellite A200-130 - how to remove the BIOS password?

  Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?

  My laptop was asked to enter the password when I put under tension.

  Hello

  Just check this article:
  [How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]

  As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.

  So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)

• Satellite A200-PSAE6E: what changed in the Bios 2.40 Vista 32bits

  Can someone tell me the release notes for the new Satellite A200 PSAE6E BIOS 2.40?
  In fact, the Toshiba never release notes on their BIOS updates.

  Unfortunately, I didn't find all the details on the changes to the BIOS on Toshiba European pages.
  I found a log file BIOS on the site Web of Toshiba us but Satellite A200-PSAE6E is a European model and I doubt that the news of the Toshiba page relates us to the A200 models.

• Satellite A200-1WF does ' t, even the bios boot

  Hi all

  I have a laptop Toshiba Satellite A200-1WF (PSAE3E-04R01DDU).
  Two weeks ago, the LCD screen is broken, so I bought a new one and it succeeded. After I replaced the lcd screen and all assembled, I want to start the laptop.
  But I don't see anything on the screen, I saw only light blue this laptop is connected to the adapter and for a few seconds the battery. After a few seconds he exploded, the same for the hard drive.

  I connect my laptop to an external monitor, no signal. I opened the several times of laptop to check if everything is connected well and as far as I know it is. I also replaced the broken one because it works. There of just scratches and a few blackheads. Unfortunately which also did not work.

  I read somewhere on the forum to hold the button for 30 seconds, without adaptor and batteries. After that, replace the adapter and the battery and start it. Also, did not work.

  After that, I check if the laptop recognizes the memory if I don't have one. so I did and the adpater transformed light orange. If it works.

  What I tried also, that's when I start the laptop to hit the ESC key and f1. Also nothing and no sound I have touched many keys.

  Please help me.

  > Two weeks ago that the LCD screen is broken, so I bought a new one and succeeded him. After I replaced the lcd screen and all assembled, I want to start the laptop. But I don't see anything on the screen, I saw only light blue this laptop is connected to the adapter and for a few seconds the battery. After a few seconds he exploded, the same for the hard drive.

  Seems you did something wrong during the disassembly procedure.
  No one will be able to tell what is badly done, it is that you did something that infringes on the motherboard or another party

  It s really not advisable to disassemble laptops because the procedure is delicate and during removal, you can damage parts of the essential equipment

  In my opinion, you should get in contact with a technician who could run some tests or check parts of a malfunction

  Mate good luck