Satellite C50 - A-1 4 - factory setting "no boot device."

Similar Questions

• Satellite L650 - cannot restart to factory setting by pressing '0'

  I pressed the 'zero', then, by pressure, turn on my L650. I want to restore it to the factory setting. He began to make a noise (3 to 5 min). When I called the '0' key, windows starts and Desktp appears as always!

  I ve tried several times and it does nothing! I also tried with F8, but it's the same thing...

  Why I can't access the menu restore? !!!

  Thank you!

  If you have the European model for laptop, it works with F8. With the help of F8, you should be able to get into the Advanced Boot options. You can enter these options?

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Satellite Pro L50 - A - "Check Fail Media, no boot device"

  My daughters computer has turned black and said "MEDIA FAIL No. BOOTABLE DEVICE"
  Can someone enlighten me how it reboot?

  Thank you

  Brian

  Hi Brian

  Start your laptop and enter the BIOS. The value of the default BIOS and test it again please.
  Also, check please if the HARD drive is listed and recognized correctly in the BIOS settings.

  Start your laptop and press the F12 button. You will find the option to enter setup (enter the BIOS settings).

• U310 Impossible of Boot or BIOS enter or set the boot device

  Hello

  I've got U310 with bad hard drive. SYTUATION:

  Laptop on the old hard drive failed to load Windows 8.1 or recovery. When I try to go to recovery error apears. Windows cannot start propetly. I change the HARD disk again an SSD, but after that turn it on nothing happens, black screen. When push button recovery menu shows, but none of the 4 options does not work. Problem with the bios, I read something can not start after trying to recovery.

  Now I don't know how to install the new system on the laptop. I ' t is possible to upgrade the BIOS without a system?

  I had USB HDD with Installation of Windows 8 in UEFI (GPT) mode. Affter correctly install the system, upgrade the BIOS now computer laptop works very well.

• Reboot and select proper on the Satellite L10W-B1768 boot device

  Dear

  I have this error in my Toshiba Satellite L10W B1768

  Reboot and select proper boot device
  
  or insert boot media in selected boot device and press a key

  I can't do recovery also USB does not work, I try to install windows from USB / driver external CD/DVD, but not the work redirect me to this page

  Reboot and select proper boot device
  
  or insert boot media in selected boot device and press a key

  I tried pressing the '0' key, nothing happens

  I tried "F12" don't get recovery options.

  also in the configuration of the bios not UEFI and CSM (in the advanced-> System Configuration)

  How can I solve this problem?

  Dear

  I have a problem in my toshiba Satellite L10W-B1768

  "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I do not get an option «HARD drive recovery» If I press the "0 or F2" key multiplication, even the boring massage.

  How can no recovery Option, I solve this problem?

  also I restore the values by defect of the BIOS but same problem

• How to set the Satellite A110-225 on the factory settings?

  Dear Mr./Mrs,

  I would like to reset my 5 + years Satellite A110-225 to the original factory setting. I don't have a dvd or anything. How to go?

  Regards, Rob

  Only way to have the factory settings is to install the recovery image original Toshiba designed for your laptop model.
  He is old enough for laptop and I don t think you can order more.

  Anyway, visit https://backupmedia.toshiba.eu/landing.aspx and check if your model is listed.

• How to set up the Satellite P200D-127 back to factory settings?

  Hello

  can you please tell me how to put my laptop Satellite P200D-127 return to factory settings.

  Thank you
  Steve

  Hello

  You have the Toshiba recovery disc.
  Do you have one or you created one in the past?

• Satellite A200 - restore factory setting did not work

  Tried to restore my Satellite A200 to 'out of the box settings', but it did not work.

  It comes up with the message to put in the windows installation disc, so I put in the recovery disc, but nothing is happening outside the laptop suddenly turn off!

  Its windows vista.
  Any ideas anyone? x

  > It comes up with the message to put in the windows installation disc.
  Description of your problem is a little confusing.
  When you want to install the recovery using recovery DVD image, you must boot from this DVD and not wait for some message that tells you to insert the recovery disk.

  Follow these steps:
  # Turn on your laptop, press F12 to get into the boot menu
  # When the start menu is displayed on the screen put the recovery DVD in the optical disc drive
  # In the start menu, choose the CD/DVD drive and press ENTER. This will force ODD to run as first boot device.
  # Follow the menu on the screen.

  When you see option for recovery just language confirm with NEXT and continue the installation of recovery.

• Satellite C50 - A - the upgrade to win little 8.1 win7

  Hello

  I was wondering, I have the Windows 8.1, upgrade of the media that I had for my Toshiba Satellite C50 - A computer. Upgrade to 8.1 Windows and got the upgrade DVD, came with the laptop. So I do it just insert the DVD, click on Set up, or do I need to go back to factory settings, then insert the DVD and as a blind it student, will need sighted assistance.

  Any help, advice, tips of people made this before. I have a 1 TB USB drive Toshiba external hard, so have saved all that and added a number of things today, but saved the rest of my stuff, docs, College work, emails, my settings for RSS feeds, contacts for outlook 2010, programs, music, TV, movies, bookmarks, etc, so all advice.

  Going to do it tomorrow. make a programming course and the Professor uses windows 8.1, and need to develop windows blinds and windows phone apps.

  Marvin from Adelaide, Australia.

  The exact specification of your model is unknown to me, but I assume that you got your machine with recovery disc Win8.1 so if you want to use Win8.1, you must start your computer with the recovery disc and make clean OS install.

  I don't know if you got your machine with Win7 preinstalled initially. If so create recovery media (DVD or USB) using pre-installed recovery disc creator Toshiba before you start the installation of Win8.1.
  This created recovery media, you can use if you want to have the machine with Win7 again.

• Satellite C50-A133 - language bar shortcut keys keep reset automatically

  Hello!

  I have a laptop Toshiba Satellite C50-A133 with 8.1 for Windows 64-bit (the system of English UK language) of the United Kingdom. So far I have not had major problems with Windows 8.1 but an annoying problem keeps coming back.

  There are currently 12 languages/installed input methods, which some I have assigned shortcuts keyboard, Ctrl + number or Ctrl + Shift + number.

  After the system boots, they work fine, but after a while becomes disabled without me aware to have done anything to turn them off. The only thing I can do is to open the menu language preferences and assign shortcuts again.

  They disappeared in the menu language of shortcut keys, specifically each shortcut that I put has changed 'None '. This happens after a while little matter what I use the computer for.

  Restart the system always back to my settings shortcuts but working with computer for a while turns them off. I use Avast, Malwarebytes, Auslogics BoostSpeed and Windows Defender regularly, as well as CCleaner at startup. I don't think it's one of these the origin of the problem, as happens when none of them scan as well. Using the Windows key + tab bar to change the input language works very well also.

  All languages are displayed and can be activated in this way. It's just the shortcut keys that keep disappearing. It is not a huge problem but can be troublesome when needing to switch between 2 or 3 languages quickly without having to scroll through all 12 of them. If someone has had this problem and is there a way to fix it?

  I have already explained this problem to Microsoft.
  They had no solution that worked and he suggested, it was a hardware problem and I need to contact Toshiba instead.

  Thank you!

  To be honest I don't know if I understand your problem, but I know first boot after laptop computer purchase, you can set the keyboard input language and that s it Mr. of course you can also change it and add some other input languages.

  To me, it seems crazy that 12 languages are available as installed services. Who did this?

  Can you please tell us how it all started? I mean I guess you use UK layout only and English as an input language. The problem with 12 languages seems crazy to me. Have you tried to change something? Have you tried to delete all the other languages?

  Hardware problem? I don't know what think of Microsoft on this issue, but there is a simple way to check this. Reinstall the original recovery image and check how it works with the factory settings.

• Satellite C50 won't boot to the top

  Hello

  My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

  Thanks in advance.

  You write about Windows or BIOS password?

  In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
  Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

  What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

  Is the cooling fan may be strong at the start of the machine?

• Satellite C50 - B - 14 K - Bios problem

  Hi guys,.
  I have the satellite C50 - B - 14 K
  all I wanted is to get into the BIOS, I tyed anthing. F12, hang in there and turn back on, f2, all F but nothing
  all I want to do is change the usb boot priority

  Ty guys

  Hello, try this... Press and hold down the F2 key and then turn on computer.
  BIOS configuration utility will load.
  Set the date in the field 'system '.
  Set the time in the field 'system '.
  Press F10 and "confirm the message" will be displayed.
  Press the Enter key.
  The configuration of the BIOS will end and the computer will begin.
  I hope this helps for you to put in the bios.

• Satellite C50 - update Windows questions

  Hello

  I bought a Satellite C50 windows 8 year last for my partner (who has the patience of a gnat and click on everything and nothing), when windows updates were installed on a month ago, she lost the office link, she kept flashing on and outside. She managed to access the Internet through internet Explorer tab (only for the bingo & ebay lol).

  An other recent windows update took forever to load then a failure to configure changes return messages that froze the laptop.

  Yesterday, I managed to return to the default value, all settings, after all personal preferences, I went to update the page to change the settings to apply updates before installing, and he said he had to be updated before choosing the updates!

  I'm back there again and I was wondering if there was a specific update that is causing all this trouble. Although my bank balance is looking better, I'll throw this lappy in the bin and just buy another!

  Help, please. Thanks :)

  Hello

  In general, I agree with the view of s IronMan.
  The point is that you can always set the computer laptop initial configuration using the recovery procedure.

  After this procedure the system windows will install updates from Microsoft.
  This may take some time and the unit must be restarted several times during this procedure.

  A system update will install before other updates have been installed.
  Therefore, this process could take a little longer.

  In addition, you will need to update to the latest system 8.1 Win the old Win 8.
  This can be done after have installed all updates to Win 8.
  The Win 8.1 update should be done as recommended by Toshiba.

  The complete step by step instruction can be found here:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  You will be also informed about updates of Toshiba Toshiba service station preinstalled.
  In this case, it will be very easy to get the latest version of the driver.

  I hope this helps a little

• Installation of recovery on Satellite C50-A-1Jn

  My son has a Satellite C50-A-1john and was doing a restore of the partition of drive hard, but stopped at halfway.

  When it tries to start, it receives the message "no boot device - please reboot."

  He did not create a floppy disk to restore his laptop, but I found where I can order one from Toshiba. Before I spend £30, I want to know if it will restore his laptop.

  Recovery image installation can not be interrupted. Now, the laptop is confused and unbootable. Problem is that interrupted recovery installation cannot continue, cannot be started from the beginning and also not ended correctly.

  What you need to do now is to get the installation of recovery disc and start the installation again.

  After doing this you will have factory again and everything works OK.
  Biggest mistake has been that media recovery is not created in the past.