Satellite C50-A-1 - drone & sound glitches, listening to music

Hello

I became aware of a hum in the background when you listen to music on my laptop through my headphones and also sound glitches random when you browse the internet and listen to music.

Just wondering if anyone has encountered this and what could be the solution?

Hello

Have you noticed this problem only using earphones or the audio problem appears also using speakers?

In my case, this has happened in two cases: speakers and headphones.
I noticed this while making and record music, but with a different computer from another manufacturer.

I studied a little and for most of these issues are related to the latency.
http://en.Wikipedia.org/wiki/latency _ (audio)

Audio latency is the time between entry into an audio signal and when it is clear a system. And if you set the latency on the lower level (low is better than the top) the CPU would be overloaded and this dirty gurgling noise would appear.

In my opinion you should not run and use too many applications in the background while listening to the music, because the CPU (Intel Celeron N2820) in this notebook is not the fastest, and 4 GB of RAM would be quickly blocked by other processes.

Tags: Toshiba

Similar Questions

  • Mysterious Thunder Sound while listening to music or just surfing the net

    Original title: mysterious Thunder Sound

    While listening to music or just surfing the net, this sound loud Thunder comes out of nowhere and it's scared the heck out of me when I least expect it. Nothing, I downloaded had this sound with it.

    Hello

    1 how long have you been faced with this problem?
    2 did you recent hardware or software changes to your computer before this problem?

    Try to check and clean the boot.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

    Note: To restore your computer to a Normal startup mode, follow these steps:

    a. click on start in the box start the search.
    b. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

    c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.
    d. When you are prompted, click on restart.

    Similar problem: http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f8d1eed4-e324-438c-8a81-31579009c5c8

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Hear randomly beep sound when listening to music

    Every time I listen to music on my Sansa Fuze I hear cela beep randomly. I thought it was the helmet that I had, so I tried different headphones. It still happens and I connected to my stereo and it still happens. Anyone know what's the problem? can I have a defective unit? I did not purchase the warranty at am I screwed? Help, please

    Have you looked outside to see if there is a garbage truck back in your home?

  • Satellite C50 - B - 14 d - sound is not good - no bass

    I have a note book with the worst ever very poor no bass sounds as the middle and trebble turned up is this voucher or a lack of sound hurt my ears no quality to it at all please don't help.

    Thank you

    Martin

    The laptop supports the DTS sound. This preinstalled software/is utility and you should select / activate the SDR for the internal speakers.
    This improves the sound quality.

    Otherwise I would recommend to use external speakers.

  • Re: Metallic sound comes from my Satellite C50-A-1HF

    Hi, today I bought the Toshiba Satellite C50-A-1HF and when I tried to listen to a YouTube video, I realized that the sound is a little metal, and there is no bass. The laptop speakers are not so good, so I plugged my headphones... same problem.

    I plugged my good boxes of my sound system... same problem. The music is always metal and there is no bass. The sound hurts in your ears when you listen to it. Y at - it a update driver for this problem or a solution?

    Please help and thanks in advance.

    Somehow, I can understand that the internal speakers cannot offer its perfect like on my U940 satellite but I m wondering the same question is present when you use headphones or external speakers.

    Have you tried to use some players and change the equalizer values, especially to low value?

  • New laptop Satellite C50-A-1CK Fan make a static/crackling sound?

    I recently introduced a new laptop Satellite C50-A-1CK the December 8,.

    I didn't use the phone a lot.
    I noticed in the last days the fan made a static/crackling sound power, seems to come from the fan (on the upper right corner) when it turns.

    Is this normal?
    I think back to the retailer and asking for Exchange?

    Just for looking for some advice, much appreciated!

    Thank you.

    > Is this normal?

    No, this isn't a common behavior of laptop and I don t think that the sound or noise is normal.

    > I think back to the retailer and asking for Exchange?

    In my opinion it s certainly a good idea to check another unit and compare appearances of noise

  • Sounds strange glitch when you watch videos, listen to music for Dell Inspiron 1545

    I don't know how else to describe what is happening except when I watch videos and listen to music, this glitch or buzzing sounds sound approximately every 10 seconds or more. I have done everything I know, search for possible viruses, reinstall the software. I'm not a geek, I use my Inspiron 1545 laptop for school, music and web, I do not so anything that's difficult. Everything works fine except this problem.

    Thanks for your help.

    shalvshah
    restore the system to an older date has apparently solved the problem.

    If she comes back, check the list of programs in the control panel > programs & features and remove Dell Support help and Dell Support Agent to it. Dell published a bad update last week that causes ringing. If you have this update, perhaps using the removed system restore.

  • Audio XP driver needed for Satellite C50-A251

    Satellite C50-a251
    P/N PSCG8V
    S/N 7D076846S

    Hi all

    I lowered my XP system and I found all the drivers for XP except sound driver, any help

    Thank you for all

    > and I'll see what its going to happen after install them on my system, so I'll say gay

    Excellent feedback is very appreciated

  • Satellite Pro A300: Bluetooth headphones sound decreases when it is connected

    Hello

    I have a pair of headphones Creative SE2300 Bluetooth that I use with my Satellite Pro A300 and its built-in bluetooth.

    They connect well and work as they should (including the A2DP and AVRCP) except that the sound cuts every 20 seconds or more for anything from a fraction of a second for a couple. Abandonment of sound is completely intermittent no apparent reason for it.

    Now earphones Creative also came with a transmitter to connect to any helmet and the connection to it works perfectly with no decline in the sound. I also connected the earphones to my phone and it used to listen to music, and once again the connection is flawless.

    So why the connection to my laptop is so bad?

    I have improved the battery Bluetooth to the last v7.00.16 (T) and my headphones are fully charged.

    Any help will be very appreciated!

    You have any other Bluetooth connections configured for example data synchronization?

  • Re: Need some drivers for Satellite C50-A-1JV

    Hello guys,.

    I have a problem with drivers for the laptop model TOSHIBA Satellite C50-A-1JV, I have used and installed all the drivers I could find on toshiba research pilot app but with no use, I need the drivers for the video card, WiFi, sound...
    Please give me a hand with this...

    Hello

    I ve checked section download Toshiba for your machine and all the drivers, tools and utilities for your laptop model are ready for download.

    To be honest I don t understand what do you mean with none of them worked for me.
    Can you please explain to us what exactly is happening?

    I mean if the operating system is installed properly all you need to do is download stuff offered one by one from chipset, screen, sound, LAN, WLAN and all other drivers. Then start to install the utilities and tools specific to Toshiba.

  • Satellite C50 - B - 14 K - Bios problem

    Hi guys,.
    I have the satellite C50 - B - 14 K
    all I wanted is to get into the BIOS, I tyed anthing. F12, hang in there and turn back on, f2, all F but nothing
    all I want to do is change the usb boot priority

    Ty guys

    Hello, try this... Press and hold down the F2 key and then turn on computer.
    BIOS configuration utility will load.
    Set the date in the field 'system '.
    Set the time in the field 'system '.
    Press F10 and "confirm the message" will be displayed.
    Press the Enter key.
    The configuration of the BIOS will end and the computer will begin.
    I hope this helps for you to put in the bios.

  • Windows 10, nvidia 930 m Satellite C50-C022 opengl error

    I bought this Toshiba - Satellite-C50-C022 with 10 64-bit windows. I can't update the drivers nvidia for the newest version. When I do all the appz I use which uses opengl, the screen goes black. I have to stay with the default drivers 347.52 with what he came. This isn't a problem with appz using direct3d as 3dmax. The problem is with opengl and new drivers nvidia on this laptop.

    Black window in lightwave
    
    Black window in modo
    

    I even downloaded the new driver from toshiba website tcm0007400h and its still does not not with opengl.
    http://www.MyToshiba.com.au/support/...download?OS=33

    I tried editing the registry and also disable powermizer as shown in this video
    https://www.YouTube.com/watch?v=Zt00C-HXFbA

    Anyone have the same problems with this laptop to win win 7, 8 or 10? Is it possible to downgrade to win 7, 8?

    I think that I will never buy an another Toshiba laptop again. My friend warned me not to do, but I just wanted to try this brand. Very poor updates and support.

  • Only the C partition on the new Satellite C50-B-14Z

    Hello

    I'm not an experienced user, but I'll do my best to explain the problem.

    I bought Toshiba Satellite C50-B-14Z with 8.1 installed Windows, and when starting the system, I noticed that there is only one partition of hard drive, the C partition. When you enter the disk management, I see there are 4 basic partitions already (500 GB disk):

    -Recovery - 1 GB
    -EFI system - 100 MB
    -Recovery - 10.97 GB
    -C (boot, page file, crash dump, primary partition) - 453,57 GB

    They are all primary partitions, and I read on the forums that you can have only 4 those primary, so I can't add one more to the D partition, I would like to have.
    Possibility that I offered in "actions" is to create a virtual hard drive, but I guess that is not the same thing.
    I also read that you can create new partition if you have "unallocated" space (partition), but all 4 before indicated are those primary and not affected.

    Then, the next opportunity that I read on is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it is good), but then I read in Windows Help:
    "When you shrink a partition, all regular files are automatically transferred to the disk to create the new unallocated space. There is no need to reformat the drive to shrink the partition. » ... "If the partition is a raw partition (that is, a lack of a file system) that contains data (for example, a database file)", reducing the partition may destroy the data. ""

    Normally, I have never tested a large part with the C partition, and now I don't know if I would destroy some system files while doing this "shrinkage" and I don't have the CD installation for the system, so I can't fix it if I ruin something.

    Please advise...

    Posted by just
    [So the next opportunity I haven't read is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it right), FONTS] [/ COLOR]

    Yes, this is the right way to have more than one partition. You can define what capacity should partition C and any free space can be "convert" to the D partition.

    One last thing: don't forget to create a recovery (DVD or USB) media. It is very important to have recovery image back-up.

  • Satellite C50 - update Windows questions

    Hello

    I bought a Satellite C50 windows 8 year last for my partner (who has the patience of a gnat and click on everything and nothing), when windows updates were installed on a month ago, she lost the office link, she kept flashing on and outside. She managed to access the Internet through internet Explorer tab (only for the bingo & ebay lol).

    An other recent windows update took forever to load then a failure to configure changes return messages that froze the laptop.

    Yesterday, I managed to return to the default value, all settings, after all personal preferences, I went to update the page to change the settings to apply updates before installing, and he said he had to be updated before choosing the updates!

    I'm back there again and I was wondering if there was a specific update that is causing all this trouble. Although my bank balance is looking better, I'll throw this lappy in the bin and just buy another!

    Help, please. Thanks :)

    Hello

    In general, I agree with the view of s IronMan.
    The point is that you can always set the computer laptop initial configuration using the recovery procedure.

    After this procedure the system windows will install updates from Microsoft.
    This may take some time and the unit must be restarted several times during this procedure.

    A system update will install before other updates have been installed.
    Therefore, this process could take a little longer.

    In addition, you will need to update to the latest system 8.1 Win the old Win 8.
    This can be done after have installed all updates to Win 8.
    The Win 8.1 update should be done as recommended by Toshiba.

    The complete step by step instruction can be found here:
    http://www.Toshiba.EU/innovation/generic/windows8_1-message/

    You will be also informed about updates of Toshiba Toshiba service station preinstalled.
    In this case, it will be very easy to get the latest version of the driver.

    I hope this helps a little

  • Vodafone Huawei 3 G Dongle will not work on Satellite C50 and Win8

    Recently bought this laptop running Windows 8.
    No matter what I try, I can't do this USB 3 G Huawei Vodafone dongle to be recognized by this Toshiba laptop.

    This dongle works in all our other laptops and laptops and tablets from other brands with Windows 7 or Windows 8 is certainly not something to do with the dongle the software, he moved, drivers or the operating system.

    At a time where it is plugged into the port USB, he opens the window asking what we want to do, telling me that the port and USB controller works, but that's all that.

    When you open the Vodafone software to connect to the 3G option Connect is grayed out and no device is indicated. In other words, it is not to recognize the modem for a reason any.

    As he is OK anywhere else, it must be something to do with this Toshiba laptop.

    Any suggestions / help would be greatly appreciated.
    We have loaded other versions of the Vodafone software and it made no difference. It must be a hardware conflict problem.

    It seems that the device does not recognize the USB dongle.
    Did you test all USB ports?

    As much as I know Satellite C50-A-xxx supports 1 USB 3.0 port and 2 USB 2.0 ports
    Check all three ports.

    You can also delete all the USB controllers and hubs in Device Manager and restart the laptop. After restarting again the unit should automatically recognize the USB ports.
    Also try to disable the sleep & Charge USB in the BIOS (if available).

Maybe you are looking for

  • Tecra S11 - what are the two primary partitions for?

    Hello everyone I just got myself a new Tecra S11 with Win7 64 and there is one thing that has me littlebit wondered.In total, there are four partitions, there are for sure the recovery a (1.46 GB) and the system a (256,38 GB), but then there are also

  • Rename a folder?

    Am I missing something? I made several folders to organize my apps by long pressing the home screen. Now, how to rename them? They are simply called "the folder '! How useful is that all organizing? Anyone know? In the meantime, I'm using an app call

  • Problem DAQmx Base Examples

    Who what to compile the Mac DAQmx Base examples? I get a lot of errors. See annex.

  • (Control design and Simulation) State-space block don't gives result

    I tried and tried but failed to get the State-Space block module to give me a graph / output. I have no idea what the problem is and I hope someone can help me. Numbers and calculations work in Matlab (Simulink) but I can't simulate in labview. Anyon

  • the program cannot start because AegisE2.dll appears during startup

    Whenever it starts windows 7 I get this message. the program cannot start because AegisE2.dll is missing. Someone knows how to solve this problem. Ive done a (sfc/scannow) and cleaned the registry, but nothing works. [Original title: Mike Jenkins]