Envy 17 t j-100

Similar Questions

• Re: Missing Bluetooth | HP ENVY 15-j026tx | Windows 8.1

  Pouf! No Bluetooth! Here yesterday, has become today!

  I'm having the same problem with a laptop Envy 17 T J 100...

  Bluetooth hardware simply disappeared after (I think?) a certain Windows update. Went live with chat support, they invited to uninstall then reinstall the networking and bluetooth drivers, ALL tried and did not get any advantage. The BIOS does not recognize that the radio-transmitter Bluetooth EXISTS in this computer. It was as if a gnome came to my house in the middle of the night, unscrew the lower part of the thing, has crawled around inside, removed the bluetooth equipment and replaced with a WAD of styrofoam.

  I KNOW it is Bluetooth inside the thing - say the plug; the order sheet confirms that I paid for it; I've used it before. I don't know when it came out, but when I tried to use it yesterday, it wasn't there. My area has had a problem with internet due to a storm, so I thought that I attach my cell phone and its data (via the cell tower) to my laptop for a little bit, see how it goes, but I noticed when I got the phone and the laptop next to each other, WHAT? BLUETOOTH NO MORE? BUT WHY?

  And I'm sure it's an update of Windows and HP incompatibilities, which are the culprits. Nothing yet HP or Windows programmers. It has something to do with the management of energy, maybe. But because I can not ANY software to ADMIT that the material EXISTS, there is no way to force-power for the equipment.

  BLUETOOTH HAS DISAPPEARED. DIFFICULTY PLEASE. Thank you.

  Rules

  To ensure a safe and productive forum, we ask that you follow these rules:

  1. be respectful. Respect your fellow users by keeping your tone positive and constructive comments. Good or bad, your experiences are always welcome as long as they are offered in a courteous manner. The respect people's time and attention by providing complete information about your question or problem, including the product name and model number. People like to help those who ask the right questions

  2. be relevant. Make sure that your contributions are relevant to this forum and to the specific category or Board where you post. If you have a new question, start a new thread, rather than interrupting a conversation. Solicitations guest members to join, participate, or buy something are never relevant.

  3. obey the law and respect your Word. Do not post anything that violates any law or any contractual agreement that you made.

  4. protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.

  5. remember that it is user generated content. You'll find lots of good advice here, but remember that your situation, configuration, or use can vary from that of the individual sharing a solution. Some tips you might find even wrong. Apply the same good judgment here that you would apply to information anywhere on the Internet.

  6. think before you post: you may not use, or allow others to use, your membership record to display or transmit the following:

  a. "rants", "slap" or legal threats against HP, another company or any person.

  b. political statements or commentary.

  c. off-topic comment not related to a technical problem or use a HP product.

  d. language that promotes illegal activity or discusses illegal activities with the intent to commit them.

  e. duplicate messages.

  f. hyperlinks that lead to sites that violate one of the guidelines forum.

  g. any message that solicits or encourages the use of an illegal substance.

  h. If you are an employee of HP, you must identify yourself as one. You should always be clear that you speak to you alone and not HP and follow HP policy.

  7. do no harm. You can not interfere in some way with the operations in the forum or with a message box from a colleague of the user, including, but not limited to, by mail or "post" bombing, bomb, bombing, other techniques flooding deliberate attempts to overload a system, broadcast attacks or attempts to avoid messaging blocking.

  8. do not artificially inflate the forum statistics. There are several place in the forum statistics used to measure performance and the overall health of the community. You may not deliberately trying to inflate a particular statistic to promote you in the community. For example, create a duplicate account in order to acquire more congratulations.

  9. collaborate with the administrators and moderators of the site. You can't circumvent bans or suspensions or otherwise do not take into account the directives of the moderators or administrators HP Support Forum.

  Thank you.

• HP Envy 15 TS (C8P47AV): can't get Realtek GBE onboard Ethernet RTL8168 go above 100 Mbps

  I've only used my HP Envy TS 15 (C8P47AV) wireless and recently got a wired connection using CAT7 at my desk on the 2nd floor. I can't exceed 100 Mbps and it is extremely frustrating! I've read tons of things on the web and can not find something that helps! My WiFi gets a faster than the Ethernet cable speedtest. I see this change once! That's when I changed the cable that I have my router on and noticed he went to 300mbps and things flying. However him unplugging and plugging it into which he disappeared port. It's almost like the old bargaining hung. In any case change this to force it to work? I tried gigabit forced, you name it, any setting changes you fixed! I even tried to plug directly into the router port and that it did not. I have other devices that work fine with this same CAT7. I'm SOL with this version of HP laptop?

  I found the problem! After reading each thread only forum I could find on Google. Someone suggested to see if there was a brooch twisted in the connector and of course the middle one was bent! I don't know how it happened as I've only used wifi. It's a little tricky but I folded it back turned and I was ready to go! The chalk of it as not a cable problem or driver!

• ENVY 100 D410a: Printer loses connectivity after mode "Eve"

  I have 2 printers, OfficeJet 5746 and Envy 100 D410a and both meet the same problem.  They work very well, then after having been slowed, printing "printer not connected" is displayed.  I did the exercises to unplug the router, remove printers from the list, I checked the ip address and they start with 10.  I have reset the printer.  I went alone on the list of printers (envy) and the problem still persists.  Please, what can I do?

  Use the following link to create yourself a file number.
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection (use officejet info)
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

• HP envy 100 D410a, printer

  HP envy 100 D410a, the printer screen no longer works?

  Hello Teeveeaa,

  I'm sorry to hear that your screen of the printer does not work.

  Here is a document that walks through some troubleshooting you can try.

  If these steps do not resolve the problem, you need to replace your printer.

  I hope this gets the display for you.

  Jean

• HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

  HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR

  Hello

  If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:

  Windows:

  http://ftp.HP.com/pub/softlib/software12/COL37748/MP-92513-1/D410Envy_FWUpdate_4684_HPCOM_x86_v2.exe

  Macintosh:

  http://FTP.HP.com/pub/softlib/software12/COL37909/MP-92884-2/HP_Firmware_Updater.dmg

  Please let me know if this is useful,

  Shlomi

• TouchSmart HP ENVY 17-j023cl: recovery stuck on 100%

  HP ENVY 17-j023cl TouchSmart

  I am trying to perform a recovery a few times, but I got stuck on this screen

  For a long time, the mouse is working, but I can press anything

  Hard drive is new and I run usb recovery, I know that's not the hard drive

  @Chai058

  It's just sad.  I'm sorry, that's happened.

  And I'm not sure what one should do; and I regret that no one answered - apparently nobody else knows precisely what to do, either.

  I guess at some point you will have to press the power button and turn off the laptop.  It can start later, it's 100%...

  Or - you could unplug the computer and carried over to a local home repair and see if something can be done with a system that is frozen and apparently will stay that way unless you intervene.

  If the computer is under warranty, you can contact HP and establish a contact / case - this can be useful if all goes on the side after you press the power button and you need help with the computer goes again:

  Contact HP support - USA-

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others to find Solutions and answers!

• ENVY 100 scans documents and photos cultures, regardless of where they are placed.

  ENVY 100 scans of documents/photos cultures. Preview is fine, but not the final result. With the help of Mac OS 10.7.5.

  This scanner has always cropped my images or documents, even if then I see very well in the preview. Right now I'm scanning my passport. I have it lined up against the side (as it shows on the drawing on the scanner) and I see the entire image on the preview. However, when it comes to the final image, I get a version cropped my passport.

  Where can I go to fix this?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and asA4 or None value.
  7. click OK and try to scan.

  If you get an error when trying to change shortcut scan patch installation, and then follow the steps above to the following:

  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Kind regards
  Shlomi

• HP envy 15t ae - 100 CTO: I would like to upgrade my adapter wireless adapter dual band. Who would be the right one?

  I currently have the adapter Wireless WiFi Broadcom BCM43142 802.11 b/g/n 1 x 1 in my envy 15t ae-100. I want to improve my adapter to a dual band card so that I can use my 5G network. What adapter would work for my laptop? I would appreciate your help.

  @Sam_Rajbhandari

  Those are your 2 options.

  Intel Dual Band Wireless-AC 7265 802.11 ac 2 x 2 WiFi + BT Combo Adapter (no vPRO) 4.0	793840 005
  Intel Dual Band Wireless-AC 3165 802.11 ac 1 x 1 WiFi + BT Combo Adapter 4.0	806723 005

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c04691689

  REO

• Unable to get web services reactivated on Envy 100 D410

  My envy 100 D410a was once working with ePrint, but has not been used for a while.  I've recently switched to connected HP and had to re - register the printer.  The news to save the printer would not print.

  After trying a few times, I removed the web services and then tried to turn it back on, but every time I get the message "problem connecting to the web services server.

  I have the Group of experts through the troubleshooting to restart the printer, restart the router, nothing helps.  I have currently set an IP address manually and can print wireless via a laptop, but not ePrint and no web service.

  I tried to configure the servers manual DNS 8.8.8.8 and 8.8.4.4 (via the printer IP address URL), but whenever I try, I get an error:

  An error has occurred. (wipv4Page-400)
  Click 'OK' to go back

  The current firmware is: SLM1CN1039HR.

  SOLVED!   This can be closed.  I did a factory reset, but not on the tab network/section.  Once I did this and restarted the printer, web services could be reactivated.  I can now access the printer via HPEPrint.

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• No internet after using the Envy 100

  Whenever I use the Envy 100 (or to be more precise: when the urge got a Wi - Fi connection) I lose internetconnectivity. But only after I finish a session to my router (Linksys WRT610N). When I turn off the router and the next time, it cannot connect to my internetmodem (Linksys AM200) at all. WiFi is in place, but I have only local access, apparently the router cannot connect to my modem (which indicates both the CABLE with the router as the to Internet is up.)

  This only happens after the sessions where I used the desire, otherwise everything is OK. During these sessions, there is no problem, only after the start a new. The only way to restore the connection is reset my hard router and reconfigure.

  BTW. I am one of the users who are unable to get a connection to the webapps desire, but there work ePrint - that is another thread on this forum. Not sure if the two problems are or are not connected.

  Any help or pointers?

  herstil wrote:

  Whenever I use the Envy 100 (or to be more precise: when the urge got a Wi - Fi connection) I lose internetconnectivity. But only after I finish a session to my router (Linksys WRT610N). When I turn off the router and the next time, it cannot connect to my internetmodem (Linksys AM200) at all. WiFi is in place, but I have only local access, apparently the router cannot connect to my modem (which indicates both the CABLE with the router as the to Internet is up.)

  This only happens after the sessions where I used the desire, otherwise everything is OK. During these sessions, there is no problem, only after the start a new. The only way to restore the connection is reset my hard router and reconfigure.

  BTW. I am one of the users who are unable to get a connection to the webapps desire, but there work ePrint - that is another thread on this forum. Not sure if the two problems are or are not connected.

  Any help or pointers?

  A FW update was recently released to solve the problem with access apps... If you have not received notification on the urge of an available update, you should be able to go to your desire screen and select settings (wrench) > Web > Product Updates > check product updates get the latest FW installed on your printer.

  Regarding the other question - routers are not intended to be turned on/turned off constantly, but it must always connect to your reliable modem after reboot.  Complete the FW update and see if the problem persists.  Also, can you share why you turn off the router on a regular basis - there is really no need to do so.

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner

• HP envy 100 don't scan

  I have not been able to scan from the printer control panel in a long time, but I've always been able to browse webscan.  All of a sudden which is no longer available.  The saved Web page reflects my printr IP but the links on the homepage, scan, settings, etc. do not connect to something more.  I ran the Print and Scan doctor and that was a failure.  If I select the printer from devices and printers there are no scan options at all.  I am on Windows 7 and do not know when this ability is gone I do not often scans.  Any ideas?

  Hello

  You try to scan via Webscan or perhaps via the HP software?

  When you select your printer in devices and printers, you can see the following options?

  -HP Printer Wizard

  -See what's printing

  -Setting preferences

  -Customize your printer.

  If so, uninstall the current software from following programs > HP > HP Envy 100 > Uninstall.

  Then download and install the latest version of the software below, which should fix the problem and restore any functionality back.

  The latest version of the software can be downloaded below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109403-2&cc=us&DLC=en&LC=en&OS=4062&product=4073738&sw_lang=

  Shlomi

• Services Web unresponsive - HP Envy 100 D410

  I just set up my new HP Envy 100.  Connected to my router wireless OK.  Print OK wireless.  And the internet connection of my PC are all OK.

  When I try to access Web Services in the menu of the printer, I get the following error message:

  
  

  "Connection problem.  TouchSmart Web app does not. Please try again later. »

  I tried to reset the default settings, the deactivation and reactivation of web services as suggested on another thread, but still no luck.

  Can someone help me?

  SSchroed39,

  You are right.  You must run the update and after having your printer check for updates again and if it finds another run this update... I would like to know how it works.