Satellite C55-A-1R8 - mouse controls have stopped working

Similar Questions

• Satellite C650 15Z two USB ports have stopped working / load

  Hi can someone throw their professional opinion on a current problem I am experiencing with my

  Satellite C650 15Z
  Windows 7

  There are 2 USB ports which are now both inoperative - there seems to be no power from them (ipad/phones do not charge) and any flash drive I insert does not appear as a drive in my computer
  and I don't hear audible alerts or message pop ups after insertion. Like I don't know what I look in Device Manager, I thought that someone may be able to help here?
  Thanks in advance

  Hello

  In Device Manager, you can try to delete and remove the USB host controller and USB hubs.
  All these devices are responsible for the functionality of USB ports.
  After you remove the USB host controller and USB hubs, restart the laptop.
  Usually the Windows operating system should recognize the devices automatically deleted after that, you can check if the USB feature is back.

• Speakers have stopped working on the Satellite a series

  I have a laptop satellite - not sure what mono - speakers have stopped working and are unable to turn back.

  Have tried checking volumen and none controls mute buttons are slected. tested and it says ther no problem but still no sound. have uninstalled the driver and reinstalled - what else can I try?

  > have a portable satellite - not sure that we
  Roll on Notepad and check the label at the bottom of the unit. You will find the name of the laptop!

  > Speakers have stopped working on the Satellite a series
  Open the Device Manager and check if no yellow exclamation point appears. If you can see this yellow sigh perhaps the sound card driver is not installed correctly.

  In addition, please plug the headphones to your laptop and check if you can hear anything through the headphones.

• Satellite L755-11j - cooling fan seems to have stopped working

  Hello

  I have the model Satellite L755-11j and I'm really happy with it, strong, fast and reliable, I have only one problem: my cooling fan seems to have stopped working.

  I don't know if it's a hardware or software (BIOS is set to dynamic switch, and in the power management is set to 'Active') delivers, because I come from Croatia, diagnostic PC is incredibly overpriced here and I can replace the fan on my own.

  I want to just make sure I don't buy new cooling fan and my problem persists. Install speedfan and Toshiba PC health monitor only confirmed what I suspected, my laptop gets hot.

  I bought the external cooling fan to help keep the temperature of my laptop down, but with the coming of the summer that I really want to solve this problem.

  To be honest, it is not easy to help you with this. Is that cooling fan works automatically and there is not a special option where you can control. Only thing you can change is the cooling method option that you can find in the advanced power options > Toshiba power saver.

  Check it please what option is set to on. Of course on this virtual path, it is not easy to tell if the cooling fan is defective or not.
  It works or not? Can you notice hot air flow when you put your hand on the cooling grill placed on the left side of your laptop?

• Satellite C55-A-1R8 - lack of 64-bit Windows 7 drivers

  Hi everyone, I need your help guys.
  I just bought my new Satellite C55-A-1R8, computer PSCJEE laptop with windows that I hate windows preinstalled to 8.1 and intel cpu onboard, but because n3520 8 I decided to downgrade to the thought of 64-bit windows 7 I'll find all the drivers, but the problem is that there is no driver win 7 for this model of support and I think that I already tried all the others without success.
  My usb ports does not work and I can't find the drivers, windows cannot do either.

  My missing drivers:

  Enthernet controller
  PCI encryption/decryption controller
  USB universal serial bus controller
  unknown device (properties said on processor Intel (r) Pentium (r) N and J-series / processor Intel (r) Celeron (r) N - and)

  also my bluetooth driver seems to be ok, but I'm not able to install any software of Toshiba bluetooth for win 7.

  If somehow I could sort my usb ports would be perfect.

  Guys you have ideas where good drivers?

  Thanks in advance!

  At first, I must say Hat I just hope that you have created recovery DVD or USB until you started with OS downgrade. Problem is that now after the new operating system installation you will not be able to start the installation of HARD drive recovery image and one day if you want to have the factory settings you can have a big problem.

  In any case, I m wondering really you have installed before Win7, check if this older OS is supported or not. You can try now is to install the Win7 drivers available for other models of laptops.
  Try please install follow rivers:
  Chipset Intel HM70 River (should help with USB ports)
  I put t know for sure if this wll help but try to install please follow drivers LAN and BT:
  Atheros LAN driver LAN
  Driver package Bluetooth Filter filter BT
  Bluetooth stack

  Please test and send feedback.

• The two shift keys have stopped working on my satellite

  Hello

  I have a problem with my shift keys; left and right have stopped working.
  I have no idea if it's a hardware or software problem.

  Any type of combination of key or software could disable them or it's a hardware problem?
  If so, what should be the fix in both cases. If so...

  Thanks in advance.

  Maybe "StickyKeys" activated? Take a look in Control Panel-> accessibility

  Disable it in release 'using the shortcut '.

• Re: Multimedia keys have stopped working on the Satellite a series

  Hello!

  I had a problem. Multimedia keys have stopped working on my laptop that belongs to the series A Satelite.
  Could u pls help me make these buttons still work?
  I tried the Toshiba assist - optimize.

  There are four fields to be filled - Description - parameter-Path - name of the button.

  What should I put in the description and parameter fields? I'm ok with the path.

  Thank you to notify

  You didn t write anything on your notebook series
  What cell phone do you have?

  For the most part the media buttons don t work because a driver problems (Toshiba control buttons). I had a similar problem with my laptop and I could solve it easily.
  The reinstallation of the Toshiba and controls of Toshiba common Modules should help you recover the functionality of buttons.

  Visit the page of European driver of Toshiba and download the mentioned drivers that belong to your notebook in the series.

  Greetings

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• Tecra A8 - keys Fn + F6/F7 for brightness adjustment have stopped working

  Tecra A8 - Fn + F6/F7 brightness keys have stopped working. Also my volume control dial works, but the pop up indicator of level stopped appearing.

  Hello

  Can you please tell us what OS you have?

  Normally if the FN keys stop working you should try to reinstall Toshiba Value added Package. It control keys FN and other special functions and in my case reinstall this package has worked.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com

  Check this box!

• Portege R500 - ctrl keys have stopped working

  Hello

  Two control keys have stopped working on my laptop. The fact that it is both of them gives to think that there isn't something physically wrong with the key. I can't do a ctrl + letter for example to copy, paste, select all, or again ctrl + alt + delete

  Can anyone suggest how to recover these keys?

  Thank you very much

  Angus

  Hello

  A combination of keys that would disable the CTRL buttons does not for me.
  But I recommend that you check the options of common keyboard as etc., FN + F12 FN + F10, Capslock, FN + F11

  In addition, you could test the laptop with an external USB keyboard.
  If the CTRL works using an external keyboard, this problem would be related to the hardware problem.

  Welcome them

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Most of my programs of control panel stopped working

  Hello

  For some time many of my Control Panel programs have stopped working. They don't open and absolutely nothing happens when I click on them... even not an error notice.

  I tried the windows update, but not yet that works. I tried to use the Microsoft Fix It tool, but tells me there is no problem.

  As part of the same show, I can't install new programs. They will download but I can not fire installers.

  Can anyone shed some light on this for me?

  I'm on a Windows 7 HPG62

  Thank you

  I was going to suggest two options, but I think that this laptop is beyond the point where it can be retrieved by the bits here and there the pieces...

  So save all your documents, music, photos and more on an external drive, then go to restore full back to factory ...

  For HP, press F11 directly after switching on of the appliance. This will take you to the recovery options. It will take the time that you will have to keep control of the updates until there is no more to be installed. NOTE that you don't want material up-to-date.

  After having updated the machine, then began to reinstall favorite programs and copy backup your data that you have saved before starting the recovery process...

• Dell XPS 12 Mini DisplayPort seems to have stopped working

  Hello

  My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort monitor the screen resolution tab in the Control Panel recognizes the display. However, the actual display is empty. Mini DisplayPort has worked well for the last 8 months or so, but stopped working tonight.

  The external monitor is; -Samsung; SyncMaster 941BW/940BW\199BW, SyncMaster Magic CX915BW (Digital)

  Any help would be greatly appreciated.

  Kind regards

  Kieran.

  I replaced the cable and now it seems to work.

  Thank you

  Kieran.

• Microsoft Comfort Mouse Sculpt has stopped working suddenly.

  Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

  Hi Jordan,.

  From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.

  
  

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

  326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.