UDP connection via wifi in the name of 8320 tunnel met IOException:Invalid

Similar Questions

• connected via WIFI, but the solution Center says printer 'not found '.

  Hello, when I first set up the printer, my router is using DHCP and assigned IP address to the

  printer has been 192.168.1.102. The range of IP addresses assigned by the router is 101-105. From time to time.

  I had noticed, the DHCP server sometimes assign an other addresses in the range to the printer.

  The printer is connected, the blue light on the front is solid, it is connected to the router successfully.

  But the computer cannot print it, there is no link status monitor HP is concerned.

  I thought that the printer should work with any address in the DHCP of the router range. I had to modify

  the router config to always assign 192.168.1.102 to the printer now all works.

  The printer is Photosmart D110.   Is this the way you would expect?

  Thank you very much for your answer, I'll keep the info as a reference.

  I've never accessed the printer through the web browser / IP before.

  In fact, I solved the problem in a different way. In my configuration of routers.

  I could add it the printer (using the name of HP928B0E - the apparent hostame)

  for the routers DHCP static table, so that the address 102 is always affected.

  I think static DHCP is a kind of hybrid between DHCP and IP static, but always using DHCP,

  but will affect only this address to the printer and not one of the other attached devices.

  What it is, it works for me.

  Enjoy - Dave

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• How to disable automatic updates of ios connected via wifi

  How to disable automatic updates of ios connected via wifi

  1. Open the settings app.
  2. Push App and iTunes Store.
  3. In the automatic downloads section, you will see an element called updates.
  4. Press the switch to turn it off

• R7000: UPNP Renderer not visible when connected via WiFi

  Hi all

  I use the R7000 as a router and I have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works very well).

  Can someone give me a clue what to do here?

  I went on DHCP and UPNP in the configuration. All UPNP (Server/converter/controller) devices are in the same 192.168. * network.

  Thank you very much

  Stefan

  Hello Stefan,

  Please perform a reset of the device and check again if still the same problem.

• Equium L40 - unable to connect via wifi or cable plugged ubs

  Hello

  I have an Equium L40. I can not connect via wifi or cable plugged ubs.
  It is a "Internet Explorer has stopped working. a problem caused the blocking of the program works correctly.

  He said in am connected to my hub and have a signal strong.

  Can you help me

  Thank you

  Steve

  Hello Steve

  Have you tried using another browser?
  Using Skype or some other messenger? None of them can connect properly?

  I put t know what is the real problem. Work not Internet Explore or WLAN connection in general?

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• EAS does not connect via wifi company post - 1.3.5

  This seems to be a somewhat different issue of EE that some know, so it was recommended that I start a new thread. My question: I can access is no longer to EAS via the wifi of my company. It worked before 1.3.5. If I turn the wifi off, I can then connect EE without problem. I get no error when connected via wifi, rather e-mail and calendar just don't update.

  It turns out that our firewall is configured to disallow connections since our internal wireless to internal resources through external access (that is, accessible through the Internet). This explains why it is not working currently - other devices exhibit the same behavior, including iPhones and laptops.

  The question then becomes: why it worked before? I can check before 1.3.5 I can be connected via wifi to my company and still connect to the Regional service. So the previous version tried to connect via wifi, then when he could not, did he switch to EVDO to connect?

  If this is the case, then it is a very nice feature and it would be great if it was turned off. If it is not the case, then I have no idea why it worked prior to 1.3.5.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• in my windows xp desktop computer that I can't connect to wifi on the 4th floor looking for the LAN or high speed internet?

  Wen I go on STAGE LAN/HAUTE SPEED INTERNET

  IT HAS 2 TILES:

  1394 CONNECTION

  CONNECTED, FIREWALL

  13934 NET ADAPTER

  AND

  CONNECTION TO THE LOCAL NETWORK

  NETWORK CABLE UNPLUGGED, FIRE...

  REALTEK RTL9138 family PC if...

  HELP PLZ... NO GUD WIV COMPUTERS... FOR IM A TEENAGER! Help! KEEP THE ANWSER PLEASE ENOUGH BASIC XXX

  Hi Irim,

  1. What is the brand and model of your computer?

  2. What do you mean by "unable to connect to WIFI on the 4th floor?

  3. it worked earlier?

  I suggest you to see link and check if it helps.

  Windows wireless and wired network connection problems

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

  Hello.

  HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

  But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

  Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

  During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

  Anyone know how to make LJ1200 to be redirected in a remote desktop session?

  Thanks in advance.

  For more information, here are 2 possible solutions:

  1. put two computers in the same workgroup and then share the printer and install from the remote computer.

  2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

• Tried everything: 1 address, but not able to connect via HTTPS to the server:

  Hello

  I am trying to connect to the third of the OSB business service web service.

  objective WS is protected with SHA1 base 64 encoded password.

  I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

  But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

  Can you please help me solve the problem.

  I tried different policies, but still does not work.

  Kind regards.

  Problem solved. We need to use the proxy server.