Satellite C660D - 17 H - black screen will not start

Similar Questions

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• P400 only black screen will not start.

  My Lenovo was plugged to an outlet controlled by a switch which, during the night, someone off my battery to die.

  So the next morning I turned on after letting it load and only the keyboard illuminated by a screen empty.

  The fan on for a brief moment and stopped.

  The only answer I get from the laptop is a beep when I unplug or plug in the AC adapter.

  I removed the battery, which held the power, trendy french adapter started and got the same result. Even after connecting the battery back in.

  I also tried to connect another monitor, but the result is the same and the monitor only records that the computer is turned on.

  How can I get my computer on without having to send to a lenovo repair center?

  I discovered the motherboard was broken. Thanks for help.

• Re: Satellite L450D-113 - black screen, does not start

  Laptop will not start. Power led lights up. Fan turns for a few seconds then stops, once again spins and stop.
  HARD disk rotates.

  No presentation of the screen. Nothing appears on the AC voltage ordinary.when his shown as a green light.
  I checked...
  1. open bettery and put it again after 5 min. (result: nothing comes)
  2. open bettery and direct what AC does not rise no matter what?
  3. open the hard drive and put it again after 10 min (result: Noting happens to display) also change hard drive.

  Please tell me wht to do now?

  On this virtual path, it is not easy to say what the problem is here.
  Did you do something that might be responsible for this? Something like the update of the BIOS?

  If I understand you well portable stays all the TIME and everything is as usual, but there is nothing on the screen. Try to connect the external display on your machine and check if something will be displayed on the external screen.

  Please test first and send feedback.

• HP Pavilion dv7-1240us: preheating indicator light, a fan noise is heard, but the screen remains black, laptop will not start.

  Perform a hard reset

  I added an external monitor and restart the computer. All seeing power are on, fan and hard make sounds and still nothing on both screens.

  Reinstall all hardware

  Still nothing but black on both screens.

  Is it possible that a virus could cause black screen and does not start.  Seems the laptop crashes, because all the lights remain.

  Please notify.

  Hi there @SVJ69

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you get a white screen when you turn on your system. I'm happy to help you with this. I would recommend that you start with searching through this page. Since the construction in and external display do not respond, I would start with the displays.
  Troubleshooting of black screens with no start-up or start-up error message
  Problems related to laptop (Windows 7 and Windows 8) displays

  This can help more evenly. If another hand, you get error messages, or a repetitive pattern of flashing LED, let me know.

  Computer won't start (Windows 7, Vista, XP)

• Satellite L450D-113 - black screen, does not start

  Laptop will not start. Power led lights up. Fan turns for a few seconds then stops. HARD disk rotates. No display. No JOB.
  Scratches it down. Nothing appears out of the ordinary.
  Searched the web. This seems to be a common problem with Toshiba laptops.
  Common fix is supposed to be the power button that is held for a minute or two with battery. This does not work in this case.
  I would rather not throw the laptop in the bin...

  Any ideas before doing the Act, would be greatly appreciated.

  Skips

  Something like this can happen on any laptop so there is nothing directly with Toshiba or any other laptop manufacturer.
  Sometimes this kind of behavior can occur after unsuccessfully BIOS updated. Have you can be made to update the BIOS or anything that may be responsible for this?

  I can't say for sure, but somehow I think the BIOS is screwed.

• Black screen, does not start in safe mode - how do I restart my mac

  Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible?  I don't have a cable Thunderbolt.

  Thank you

  If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

  https://support.Apple.com/en-us/HT201462

  Ciao.

• Satellite A200-PSAF6A - white screen, will not start

  I've had for about a year or more now, out of warranty, and I had no problems so far. The operation of the machine is perfect, done a little warm here and there, but I never had blockages of material etc. The problem lies in the boot process where it lights up but the screen remains black and the HARD drive activity light flashes once, the optical reader clicks like it normally does at the start, and all the normal power supply/battery lights are as they should be, but the laptop will not progress beyond that. The power led remains blue and there is not much activity from the hard drive or any part of the material. This not even the screen of the BIOS at all. At some point, which I suppose because I can't see a pattern emerging in any form, the laptop will emit several beeps and the HDD led starts to blink signifying a boot up is ongoing, but the screen remains blank. At this point, if I turn off the laptop holding the power button / I am sometimes able to start with the display work, but once these things are depend on chance then sometimes it works and sometimes it isn't. Is that a real problem for me because I use this laptop for school and I get sometimes it will feed any or he will, and I'll have to wait a certain amount of time, which could be easily half the class and when he does the beep hard distracted others which is quite annoying.

  Now, I went through a lot of similar topics and tried what was said, but to no avail of course. I tried to delete all the components (RAM, HDD, optical drive, Wifi etc.) and reinstalling them that sometimes only a temporary solution. In the RAM slot I have 800 mhz and 1x1GB 667 mhz-1x2GB, I tried various arrangements with the installed RAM and RAM I have around my house, but I have not yet come to a solution. I find that I can't start up with RAM in just the second slot, I guess it's probably normal, but if it's not please comment and tell me otherwise because I read about another solution to a similar problem a person should use the ram in the second slot to get his laptop to start.

  My suspicion is that it's to do with a kind of BIOS check or maybe a BIOS corrupted, that I could not resolve without a technician because I am already in the current version of the BIOS. I did not update the BIOS that is not. If not then I'll assume that it is just a fault of power on the motherboard circuit. It's a really weird problem because it works quite well after, and I don't think it's a hardware problem perfectly serious because he wouldn't if it was.

  Any help is appreciated on the topic, share your knowledge, if you have had a similar problem because whatever it is would be useful

  Thank you

  James

  I'm not 100% sure but I think that the graphics card can be removed. Maybe you have enough experience with replacement of equipment, but laptop disassembly without maintenance manuals can be risky.
  I really hope you know what you're doing. Maybe you should contact the nearest authorized and ask for help.

  BTW: Where you want to get the new graphics card Satellite A200?

• Satellite C660D - 1-7 - black screen

  Hello.

  I bought a new screen for my computer.
  But I have a problem... after I put on the new screen, my screen is totally black.

  Does anyone have any ide what can be wrong?
  the name of the computer is: TOSHIBA SATELLITE c660d - 1 c 7

  Sorry mate but could you give more details?
  Which screen did you buy?
  You replaced the internal screen? Or did you buy an external monitor and have connected to the laptop?

  When did you notice the black screen? You see the Toshiba splash screen?

• Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

  Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

  Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

  Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

  I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

  I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

  I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• R51 has black screen - does not start

  This question has been taken before, but I think I may have a unique situation.

  My R51 worked perfectly and was maintained during the 8 years that he was with me. I wanted to update my RAM and downloaded the update to the BIOS and chipset drivers updates.

  After that the tension I pulled the old 256 MB RAM sets under the keyboard and the bottom of the machine. Then I inserted the only 2 GB of RAM into its slot under the keyboard and reassembled it.

  Black screen / no start

  Went out the 2 GB replaced sets of 256 MB and it worked fine for a few hours that I looked for reasons why the 2 GB would not work.

  ' Sudenly the screen goes black and the closed system.

  It will supply (battery light / light green status), but the screen is black and it does not start. The fan is running and the battery costs.

  I tried hitting F12 and F8 but nothing.

  Then, I stored it down and pulled the chip near the connector of the screen and replaced by a spare part I had in hand... still nothing.

  From the CPU and replaced by another I had on hand - nothing new.

  I put all the oringinal gear back in place and tried to put pressure on the Board of Directors for the boot but still nothing.

  Help, please! I'm not very tech savvy but as you can see I'm not afraid to try.

  Thank you

  Thanks George!

  I was able to get the other 51 R spare parts and does the job!

  Send this message to him now.

  I want to send my thanks to all on this forum. It was the first time ever, I cracked the case on a laptop. Thanks to posts in these forums, I had confidence and information to see the job through.

  I have more no fear an attempt to repairs on the Thinkpad.

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• Pavilion 13 x 360 p: convertible laptop black screen, does not start!

  I can't turn on my computer the power button lights up and I can hear the fans and then I get the hp screen and black screen. I read the forum of other messages on out of batteries and other components of the laptop, but since mine is 2 in 1 not sure how. Have had the phone since December, should be doing this already. Any help would be greatly appreciated!

  Watch the following video. Try the method described for the Envy x 2 laptop

• HP stream 11 inches: black screen will not do anything

  I restart my laptop and having said it has restarted for 20 minutes, the screen went black. Now, the screen is black, it turns off (the power light does nothing) and it does not recognize when the charger is plugged in it please help me this is my only computer for school.

  Let the unplugged charger until the battery completely discharges then reconnect and try to start it.

• Satellite L450D - 12 X: black screen before Windows starts - SOLUTION

  The laptop will start the boot process, stop the Windows with the HARD drive lights blinking like it is starting up, but the screen is black with the pointer of the mouse only show.

  Hit the power button to restart the boot process can have the same result or it can start Windows. Sometimes, it can take 3 or 4 attempts to start to get into windows.

  _I have found the fault_ and read of the many messages of the forum, I understand that it is a huge problem for many people who have blamed the Toshiba and windows 7.

  They are all wrong; the problem is not a HARD drive problem or a problem of operating system.
  * The problem is memory. *

  These computers were given free children via PC suppliers appointed by the Government. Those eligible had the choice between several suppliers that were contracted to supply eligible children with these machines. The company that provided our positive Solutions Toshiba boasted their machines were a larger ram capacity and so the customers have been tempted to go to their case and why not with 2gigs available instead of only 1 GB?

  What does positive IT Solutions, it was just add another chip of 1 gig. What they should have done was to remove these two circuits and replace the two as a pair, because it's the chip memory, they added that causes these teething problems and what actually looks like the laptop hardware or windows 7 is to blame. This problem has fleas memory incompatible and rendered as well as by the company provider adding their own single-chip rather than replace them as a pair.

  Here are the simple rules being broken to save money and operate the system of Government by encouraging customers to buy from them under the pretext of getting a more powerful machine. They would have known these chips could cause incompatibility problems and in addition I talked to them to solve the problems we met only to be told that the problem is with windows. I reformatted and could not put in the code for Windows 7.

  After contacting Microsoft, they said I'd need to buy a new copy of Windows 7 or return to the positive IT Solutions for them to give me a new code which of course they would never do. I bought a new copy of Windows 7 on their advice and guess what; the problem was always the same.

  Only after I took apart the case of memory did I then realize what is the real problem.
  I changed the chips and hey presto it works perfectly now.

  I hope this helps others.

  Indeed, failure of module of memory can cause various problems.
  Thanks for sharing this info with us. Might be interesting for the others