HP stream 11 inches: black screen will not do anything

Similar Questions

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

  Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

  Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

  Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

  I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

  I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

  I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• Satellite C660D - 17 H - black screen will not start

  You just bought at the course yesterday but then seller does not think this laptop is absence of motherboard.
  I press the power button and the fan runs for 2 seconds then powers off.
  I remove the battery and the DC cable. Then I press the power button for 20 seconds, but nothing.
  Any ideas greatly appreciated.

  (I think the bios is weong. I really don't know the reset this cmos.)

  * @ surveshoeb *.
  In case you have the same problem, your motherboard is faulty and there is only one solution:
  the defective part (in this case mother) needs to be replaced

• P400 only black screen will not start.

  My Lenovo was plugged to an outlet controlled by a switch which, during the night, someone off my battery to die.

  So the next morning I turned on after letting it load and only the keyboard illuminated by a screen empty.

  The fan on for a brief moment and stopped.

  The only answer I get from the laptop is a beep when I unplug or plug in the AC adapter.

  I removed the battery, which held the power, trendy french adapter started and got the same result. Even after connecting the battery back in.

  I also tried to connect another monitor, but the result is the same and the monitor only records that the computer is turned on.

  How can I get my computer on without having to send to a lenovo repair center?

  I discovered the motherboard was broken. Thanks for help.

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• HP photosmart 5515 all-in-one: HP5515 all-in-one black ink will not print

  I'm having the same problem that other messages that I have seen posted - my black ink will not print

  Help!

  You can try to unlock the black cartridge using a cotton swab soaked in hot water.

  Turn the printer off by removing the power cable.

  Remove the black cartridge & you we see a wire mesh DAB gently with the Q-Tip.

  A cleanup operation between attempts.

• Can't connect, connection startup screen will not respond to mouse clicks or keyboard

  I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

  Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

  You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

  Tricky

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.

• Gadget screen appears on the home page but will not move anything to the homepage

  Original title: you had to send a solution to my problem of gadget #1194371707

  gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707

  Delwyn salvation,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with gadgets.

  1. which browser is installed on the computer?

  2. have you visited a support Chat or call?

  3. What do you mean by 'will not move not anything to the homepage'?

  Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707

  Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.

  Good day!

• Black ink will not print in my HP C4650

  My black ink will not print in my HP C4650.  Using Windows 7 64 bit.  The parameters indicate the cartridge is 1/4 full.  I tried to change the cartridge and still have the same problem.  There is no error message and I did 6 head cleanings with no luck.  The printer was working fine one day with no black printed on the page on the other.  Someone at - there a solution to my problem?

  Hi 362darts,

  Here is an excellent article to troubleshoot your printer when you have streaked or faded prints, prints without black or other colors, prints with cloudy or blurry text, prints with streaks of ink or smear and many other problems.

  http://support.HP.com/us-en/document/c01675472

• What to do when the required help screens will not accept any existing ID or passwords? 13 download to PC elements missing section archive. Normal help screen will not accept any adobe exisitg D. Whatdo, I do now?

  What to do when the required help screens will not accept exixting ID or password?

  Downloaded items 13 PC. Implementation noted this archive missing article.

  If something is demanding a password is not likely to be a request for Adobe since Adobe does not normally require any.  It could be your computer's security requiring you to allow an installation to occur.

• Lightroom 6 does not. Splash screen will not go away. Task Mgr "not responding".

  Downloaded and installed (twice), you click ok to update the catalog LR 5 (will not find a LR 6 cat, however), but the splash screen will not go away and program will not work.  Circle of blue rotation on forever, task manager says does not.

  Signed by adobe and in return, no help.

  I downloaded and install creative cloud and Lightroom 6 works now, it seems to pick up on initial start-up... How are we suppose to know?