Satellite C850 - Windows 7 does not start correctlly

Similar Questions

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• Satellite C850 hangs and does not start

  My Toshiba Satellite C850 cannot load windows when you install Windows 7 on it.
  It freezes when the logo is about to appear.

  So, how can I solve this problem?

  Hello

  I would say: try to recover the computer laptop back to factory settings.
  Have you created a recovery media in the past?
  If this is not the case, check if you can perform HARD drive recovery.

  Here is a link to a Toshiba document [how to recover a Toshiba notebook with the HDD recovery procedure | http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm]

• Satellite C850 - 19(d) does not start after the UEFI to change CSM

  After wrongly BIOS change between UEFI for CMS, saving changes and leave, after execution of reeboot crazy screen and won't let me access the BIOS or Windows.

  SUGESTIONS?

  Thank you by the way

  What do you mean by "the screen turns crazy?"
  Start your machine and press F12 to get into the boot menu. You can access the menu?
  If so, there is also possibility to enter the BIOS settings. Try please o enter the BIOS settings on this path and set it to default settings again.

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Windows 7 build in windows game does not start

  Windows 7 build in windows game does not start

  Hello

  ·         What happens when you try to start the game?

  ·         You get the error message?

  Try this:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the games and place a check in the option of games. Click OK

  d. restart the computer

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows XP does not start

  Suddenly Windows XP does not start, instead, I get a message that says"

  Type the name of the shell for example, c:\windows\command.com.

  I am able to boot in safe mode but.

  Can anyone suggest what may be the cause of this and especially what should I do?

  Thank you

  Tony

  Thank you, Gerry. But the problem turned out to be a defective drive cable.

  Tony

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.