Satellite L300-135 does not start in windows!

Similar Questions

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• Satellite L300-100 does not start

  Had some problems with my Toshiba L300, which would close sharply down. However, I have a problem with battery or adapter. Power adapter has been checked and bought a new battery. Now, the computer does not start. None of the traffic light turns on and I can just hear a sound like a clock click click when the power cord is connected.

  Any idea what can be wrong?

  On the virtual path that is not easy to offer the exact diagnosis, but for me it looks like a malfunction of the equipment. If there is no light or any reaction when you connect power adapter, it is possible that electronic power supply do a few worries.

  Maybe you should contact Toshiba service and allow to check the motherboard.

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• Satellite L300-2CW does not start

  Hello

  I hope someone can help as Im at a loss!

  Laptop - Satellite L300-2CW (PSLB8E-15W007EN) Windows 7 upgrade from Vista (Tosh upgrade disc)

  When I turn on it shows the Tosh screen then just a line of underscores in the upper left side and that's it.
  I've tried everything. F12 F2 holding 0 at startup but still nothing.
  The hard disk may have crushed the thought but put it in a basket and now have a copy of his hard drive, so nothing wrong there.

  IM completely lost now.

  Help, please.

  Thank you Russ
  .

  Hello

  You have tried F2, F12 and 0, but have you tried to press F8 immediately after switching on the device?
  Then you should see an advanced startup options.

  Here you must choose to repair my computer and Toshiba HDD recovery.
  This should launch the installation from the HARD disk partition.

  Have you created the recovery disc at the beginning?
  I presume that you didn t.

  Well, if the procedure with the HARD disk partition will not help, then you will need to order the disk recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite L300-144 does not start

  Hello!

  My laptop Toshiba Satellite L300-144 arrested beginning after about 2 weeks of no use with the following sympthoms:
  -When DC cable is unplugged, none of its lights are turned on and pressing the button "power on" (and others) does nothing;
  -When DC cable is connected, 'DC IN' led is _blinking green_, led battery is _blinking orange_, others are turned off. by pressing the button "power on" (and others) does nothing.

  Waited for over an hour with DC cable connected try to charge the battery of the laptop without change.

  I have not found the meaning of this signal (DC IN green, battery flashes orange flashing) in my manual.

  What is this means problem with the battery of the laptop?

  How can I fix?

  Hello

  Flashing led DC-IN is not a good sign.
  Of my knowledge led begin to blink when a hardware error has been found.
  I'm not sure if this will help but try a short workaround:
  -remove the battery, disconnect the adapter
  -wait about an hour and then reconnect the two part.
  -try to turn on the laptop

  Check if it helps.
  But if this work around won t help you, then you would have no choice but to get in touch with ASP in your country.

  Sorry, but that's all I can suggest.

• Satellite P100-347 does not start in Windows

  My recently purchased P100-347 has recently developed a problem where it is unable to start windows, I get the Toshia welcome screen, then the initial xp load screen, but then everything stops and I'm left with a blank screen.

  This happens not all the time, but it only successfully boots up to abut 1 to 10 tent, ideas or suggestions?

  Well, your laptop has successfully passed the POST (power on self-test) and so I n t think there could be something wrong with the material as the motherboard.

  Possibly the HARD drive contains certain corrupt sectors or there problems with the operating system.
  In any case, I think the first attempt should be reinstalling new Windows OS.
  I assume you have a Toshiba restore CD. You use this CD to install the OS.

  After this procedure the laptop should start without any problems.
  But if the problem persists you should contact the service partner because it s unusual laptop cannot start properly. In all cases, the warranty is valid and everything should be done for free.

• Satellite A110-162 does not start under windows

  Hello

  Could someone please try and help, Sunday my satellite was fine, came to do turn, Monday and all I get is the black screen, we apologise... etc and start mode, safe mode with networking, security options it security comms mode, last known good config and start windows normally.

  I tried all these, all safe mode options are is giving me a lot of lines from multi (0) disk (0) partition (1) etc., known last good config, and start windows normally just take me to the screen with the blue dotted line flashing boot to windows then pause then intermittent again until I have manually it turns off. I considered using the cd of restoration but if poss won't lose anything on the computer.

  Any suggestions would be greatly appreciated.
  Thanks in advance and Merry Christmas to all!

  Hello Anne

  I don't know if this can work, but you can try it. Start your computer in Mode safe mode and then try to restore the operating system to an earlier time using System Restore tool.

• Satellite A205-S4607 does not start after windows vista update

  Hello

  I was installing updates in windows vista, but the battery was low and the computer is turned off, then, at the beginning of computer doesn´t, only the hard drive led is light but the screen is black, please can you help me?

  The model is Satellite A205-S4607

  It's not so easy...

  Try to remove the battery and unplug the AC adapter, then wait 30 to 40 minutes, plug in the AC adapter and try again. Maybe the problem is resolved.

  Give me a feedback, what happened.

• Re: Satellite l300 - 14g does not start, hdd user password

  Hello.

  My neighbors gave me their cell phone to try to fix it. It just is not under tension.
  Place the screen black, blue, white letters:
  Please enter the password for HARD drive built-in user:

  They told me that it just appeared one day. I can't get into BIOS. There's nothing I can do about it.
  I tried to do a search in the forum and found nothing.

  Googleing I have readen on similar situations. You have any ideas what I could do?
  Maybe it's a broken HARD drive, I could replace it with another.

  Hello

  HDD password is NOT BIOS password.
  HARD drive password can not be erased if you n t know this password!

  If the HARD drive password is unknown, then the HARD drive is useless!

  You can buy a new one and replace the HARD drive.

  Good bye

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite 1700-200 does not start

  HELLO, I RECENTLY GOT AN ERROR ON MY LAPTOP SATELLITE 1700-200. THE ERROR IS THAT THE MACHINE DOES NOT START IN WINDOWS MILLENNIUM EDITION. IT STOPS RIGHT ON THE SCREEN START AND STAY THERE. I HAVE LEFT IT ALL NIGHT AND CAME BACK TO HIM ON THE SAME SCREEN. NOW WHEN I PRESS CTRL ALT DEL TO RESTART, I GET A BLUE SCREEN AND ERROR "WHEN INITIALIZING DEVICE CONFIGMG
  WINDOWS PROTECTION ERROR. YOU MUST RESTART YOUR COMPUTER.
  SYSTEM ORDER. »

  I SEARCHED ON THE WEB AND SOME ANSWERS SAID TO TRY A BIOS UPDATE.

  I WENT TO THE SUPPORT SECTION AND DOWNLOADED THE UPDATE. THEN I FOLLOWED THE INSTRUCTIONS TO GUIDE ME IN THE UPDATE, BUT THEN GOT THE ERROR THAT THE UPDATE DOES NOT MATCH THE PRODUCT ID. DOES ANYONE KNOW OF THIS PROBLEM AND A RESOLUTION. I SAW THE MICROSOFT VERSION AND CANNOT FIND ANY WAY TO FLUSH THE CACHE L2. ANYONE KNOW?

  Hello

  The BIOS updates are available at https://eu.computers.toshiba-europe.com

  Support & download you can choose your machine (important!) and download the BIOS files!

  When it does not also find another way!

  On the blue screen: you tried to start safely modeor last known good configuration?

  Campino

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?