"Windows XP" SP3 - startup freeze

Similar Questions

• Windows XP SP3 upgrade freezes at widows logo screen during installation

  Windows XP home SP3 update installation hangs at logo screen of widows at the end of the installation process. I then have to restart the computer Windows XP load how fortunately but it then immediately starts trying to configure documentviewer and is unabe to find the installation files. At this point IE also will not work reports an error "the requested lookup key was not found in any active context"

  Now, I'm sure that the last problems are caused as a result of the installation of Windows XP SP3 update does not complete. I tried to do a manual update via Windows update, but after 105 update files that still has not solved the problems. I tried a system restore, but this also was not a success.  Can someone please help with advice as to how I might remedy the situation?

  OK, after more research I found that documentviewer.msi was the issue that prevents installation ended. The file is part of HP Imaging software, so I uninstalled the HP software & the upgrade was able to complete resolution of the problem with IE in the process.

• Windows XP SP3 PC freezes when using Internet Explorer

  This happens everytime I go in IE8.  Full gel - have to hard reboot. Restoration of IE8 by default settings, uninstall IE8 & using IE7 and IE8 running without Add-ons-none of these worked.

  I can access the Internet via Google Chrome Safari & also BBC iPlayer & Sky Player and other programs related to the Internet.  No other use of the computer does systematically breaks down, even if it does sometimes.

  I have automatic Windows Update, BT NetProtect over McAfee and regular analysis.  I have repeatedly run CCleaner and tried other utilities, without success.  Today, I downloaded a number of corrections suggested by Microsoft, which none have worked.

  But I need to use IE because the applications of Citrix remote access to my work only seem to work with IE, Google chrome, etc.

  Help, please!

  You used the word freeze and crash.

  When I hear 'crash', I think that the accident of Blue Screen of Death...

  If your system is not responding, freezes or crashes, and you can not understand why you can force a Blue Screen of Death (BSOD) that will create a crash dump file that you can analyze and see what is running at the time of freezing and get some ideas that don't involve speculation or try things that might work.

  Although it may seem strange to think of deliberately to cause a blue screen of death (BSOD), Microsoft includes such a provision in Windows XP. The feature is built into XP specifically to diagnose the problem when a system stops responding.

  This will help eliminate difficult things or guess what could happen maybe.

  Sometimes it won't even be a clue to the problem in the event log.

  Here's how to force your system to create a BSOD:

  First of all, make sure that your system is not set to automatically restart on system failure.

  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.

  Put a check mark in the box "send an administrative alert.

  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK twice to save the settings.

  Now, enable the feature XP generate a crashdump on demand.

  Before making changes to the registry (there is no cancellation or exit without saving the changes in the registry editor), back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  For PS/2 keyboards, launch the registry (start, run, regedit.exe) editor and navigate to:

  HKLM\System\CurrentControlSet\Services\i8042prt\Parameters

  For USB keyboards, start (start, run, regedit.exe) registry editor and navigate to:

  HKLM\System\CurrentControlSet\Services\kbdhid\Parameters

  Click on edit, select the new DWORD value and name the new value:

  CrashOnCtrlScroll

  Double-click the DWORD CrashOnCtrlScroll value, type 1 in the value data text box to enable the feature, and then click OK.

  Close the registry editor and restart Windows XP so that the changes take effect.

  When you want to cause a BSOD (when your system unresponsive), press on and hold down the [Ctrl] key on the right side of your keyboard and then press twice the [scroll off] button. Now you should see the BSOD and you'll have a crash dump file to be analyzed.

  You won't see a lot of useful information about your problem on the BSOD screen, but you will find the answer in the crash dump files.

  You may need help interpreting your crash if dump files you've never seen before, so that's okay too.

  You can read about the function here:

  http://msdn.Microsoft.com/en-us/library/ff545499.aspx

  There is no harm in leaving the feature enabled (mine is always on), but if you are forced to remove it, simply undo the changes in the registry.

  Launch editor of the registry (start, run, regedit.exe) and navigate to:

  HKLM\System\CurrentControlSet\Services\i8042prt\Parameters

  or

  HKLM\System\CurrentControlSet\Services\kbdhid\Parameters

  Select the CrashOnCtrlScroll value, click the Edit menu and select the Delete command.

  Close the registry editor and restart Windows XP.

  Go ahead and test the new manual crash dump on the demand function to make sure that it works as expected, then wait until the system hang again and get a few dumps the system when it is suspended.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows XP SP3 causes reset on startup.

  Windows XP SP3 causes reset on startup. Recently had a system and recovery works on SP2, but when I have to this day to SP3 system resets. It will boot in SafeMode ok. I did a F8, disabled reset at startup and got the following error message on BSOD 0X0000007E (0XC0000005, 0XBA2A8756, 0XBA4C3430, 0XBA4C312C}. Before recovery system ran on SP3 very well. Any suggestions would be greatly appreciated. This is a desk top Compaq 2005 running XP Home Edition.

  Boot without failure (but not normal mode) usually there is a 3rd party driver problem.
  Please update ALL the drivers for the system on the Compaq site
  Also update all old programs and devices you have.
  If you do not find an update - uninstall the program.

  Do not install a Service Pack is usually:
  -obsolete drivers/programs
  -malware
  Please try a free couple of anti-malware scans here: http://www.carrona.org/malware.html

• I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help any permanent solution known.

  Hello!
  I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help with any permanent solution known.i should go to the control panel and to recover it again whenever I turn my on.kindly advice, someone machine me a solution permanently this problem.i want to stay always on the taskbar the volume icon.
  the honest answer is expected... Thank you!

  Hello

  Try this:

  Control Panel - device - sounds Manager - note manufacturer device name and info on the graduating model.
  Double click and get the date and version of the driver (if 06 are dates, you use the default windows driver). Now
  Click the DRIVER UPDATE (this can not find anything because MS is far behind the certification of drivers). Now LAW
  CLICK above and UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the manufacturer of the system and recover the last pilot audio/Hi-Fi as a fall.

  Download it - SAVE - go to where you put it - RIGHT CLICK top - RUN AS ADMIN - REBOOT

  Now do the same for the manufacturer of the device (the one that made the device - if you were using the default windows
  you might need to look in the Device Manager - his new driver).

  Often, you will need to run the sound card drivers several times to get the latest version installed and will appear in
  Manager - Sound. This is because they make back the drivers one at a time and then finally install the
  most recent. Look in the Device Manager to be sure that you have installed the version of the driver is the one showing, if not
  run the driver again (reset each time) until the shows a correct.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Rob - bicycle - Mark Twain said it is good.

• Windows XP SP3 didn't stop. Explorer freezes.

  Hello. In the company I work, all stations have Microsoft Windows XP Professional with Service Pack 3 installed. They all connect in an Active Directory domain.

  I can log on to the domain and use the computer normally. Anyway, when I try to shut down the computer when I click in shutdown (stop), the computer crashes completely. I must kill explorer.exe and start it again and use the command 'shutdown-s-t 00' in the command prompt to shut down the computer. Even in this way the computer crashes in the message "Windows has finished" until I have disable manually by holding down the power button. How can I solve this?

  The strange thing is this problem happens just to connect to some of our areas. When I login with local administrator password I can disable the computer normally.

  Hi Anderson,

  Thanks for choosing Microsoft Community!

  If I understand correctly, you have problems stop Windows XP SP3 computer, which is on a domain.

  The question you posted would be better suited in the itpro Windows XP forums.

  Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

   

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Windows xp sp3 shows perparing to install the screen on startup

  On windows xp sp3, whenever I start up and constantly after that I get a box, Setup of windows in the box it says preperaring to install and I can't get rid of it. He keeps of flashes and if I get to cancel it, it comes back and even more once this past months, that I'm not Tech. There, anyone can help me please?

  Thanks I appreciate your effort to help me.

  Y at - there someone out there who can

• Faulty Windows Update causes PC freeze (?)

  My PC freezes 2 minutes after loading Windows (XP SP3). HDD is audible during startup, and then continuously until system freezes.  Only problem, I could detect is Windows Update: according to the automatic program set elements are misconfigured. Fix, he could not correct the problem. I tried the manual fix (in Safe Mode) by following the instructions on the support network, but did not work (971058 KB). "Not sure if it was because I tried in safe mode, but the mode" normal currently not functional enough "to try it y it."

  Rolled back to previous restore points with no result. Tried to manually download all fix/update Windows Update is working but unable to do it in safe mode and in "normal" mode the system hangs when the site is loaded.

  Any advice would be much appreciated.

  My PC freezes 2 minutes after loading Windows (XP SP3). HDD is audible during startup, and then continuously until system freezes.  Only problem, I could detect is Windows Update: according to the automatic program set elements are misconfigured. Fix, he could not correct the problem. I tried the manual fix (in Safe Mode) by following the instructions on the support network, but did not work (971058 KB). "Not sure if it was because I tried in safe mode, but the mode" normal currently not functional enough "to try it y it."

  Rolled back to previous restore points with no result. Tried to manually download all fix/update Windows Update is working but unable to do it in safe mode and in "normal" mode the system hangs when the site is loaded.

  Any advice would be much appreciated.

  Looks more like a hardware or a hardware driver issue.

  I do not remember what, if any, of what you can do in mode safe - but give it a shot.  Even some parts, that you did before.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

• How can I run sfc or sfc.exe in windows XP SP3

  Windows XP SP3, media edition ver 2002

  PAM open window has reported the problems with system files

  pre-loaded Dell software, do not have the disc cd XP 2 Professional asked for installation in the cd player.

  I have the dell disk operating system and drivers and disk utitilies.

  I would like to launch sfc to find the problem, then run sfc/scannow to try to resolve the problem.

  I can do in the immediate window, or should I open the cmd prompt, or make some time at startup to perform

  correction action? Hope my question is simple, appreciate all the help I'm not safe and does not want to

  create more problems. Thank you

  mojo_bb

  Hello

  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• Install HP laserjet 1300 Windows XP, SP3,

  When you try to install the HP Laserjet 1300 on Windows XP, SP3, I get an error message and the process rollsback.  The message is

  "Cannot install this hardware there was a problem installing this hardware, HP LASERJET 1300 PCL 6, an error occurred during the installation of the unit,"the specified module is not found."" »

  I used the original printer cd, bought a second new HP cd and downloaded the drivers directly from the HP Web site.  I get the same error message on all attempts.  The show record events Setup printer every time error.  Can anyone help?  Thank you

  Hello

  1. is the specific question of the installation of printer drivers HP LaserJet?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message?

  4. How is the printer connected to the Windows XP computer?

  Follow the mentioned methods:

  Method 1:

  Run uninstall and reinstall correct and check for the issue.

  a. to do this run the FixIt tool from the following links.

  b. click on the link below and select run now button.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  c. After you download and run for the first time

  d. Select run on window smallpop and select run on Internet Explorer-security warning window.

  e. Select detect problems and allow me to select patches to apply.

  f. Select installation.

  g. after the audit selected the option you need to install and click Next to install.

  Question remains always use same method 2.

  Method 2:

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  Method 3:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

  For reference:

  Product HP LaserJet 1200, 1300, 2200, 2300, 3200 and 3300 Series - PCL XL errors occur when printing using the PCL6 printer driver

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=238320&prodTypeId=18972&prodSeriesId=238320&ObjectID=bpl10637

  I hope that the above information is useful!

• Windows xp sp3 delay at the start after login

  I have a windows xp sp3 with 2 GB of RAM and 250 GB HDD to 45-50minutes to load after I entered my user name and password.

  Please, how can I solve this problem. I checked the hard drive for errors, and the system will load faster on e-safe. Mode
  Concerning
  DOE

  To connect to your computer, there are a lot of programs, processes and services launch.  It is likely that one or more of these processes contributes to your delay.  The first criterion would be starting for a minimum system.  This is what we call 'Safe Mode'.  When you start your computer, several times, press the F8 key until a black and white screen comes up, and then select "safe mode" or "safe mode with networking" with the arrow keys and starts.  If your computer starts up fairly quickly, then we the non-critical elements that contribute.

  To debug this, you use a program that will show you all the programs that start at startup and allow you to temporarily cut some of them to determine what (s) is / are the cause of the problem.   Microsoft has a built-in program called "msconfig" or you can download another program called "autoruns" from Microsoft
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Instructions for the startup and use of msconfig are contained in this article:
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
     <>http://support.Microsoft.com/kb/310560 >

  When you find what's causing your problem, the action is usually obvious.  Sometimes UN-installing and reinstalling is all you need to do.

  -JW

• Cannot install Windows XP SP3 via download and CD

  Original title: "should reinsatll XP, I get to SP2, but when trying to install SP3 there will not, accomplish IEXPLORE. EX - Application error ".
  I have Win XP MCE with SP3 and IE8 installed on my Dell 5150, which occurred without fault until it crashed 5 weeks ago.

  
  I reinstalled the OS to SP2 but when I try to install SP3 it proceeds smoothly until the , when it hangs and stops the hard drive. It is with SP3 via download and the CD that I bought.
  CTRL, Alt & Del give the info    
  
  I re-installed IE8 twice, but it does not cure the problem.
  
  Suggestions, please?
  * original title - IE8 blocks SP3 *.

  Hello

  How do you try to download the SP3?

  
  Method 1:
  You can perform the clean boot, and then try to install the Windows XP service pack 3 and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  You try to install Windows XP service pack 3 with the help of the link and check:
  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:
  You can also check out the link to see how to install Windows XP SP3 on the computer.
  Learn how to install Windows XP Service Pack 3 (SP3)
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Also check out the links to learn more:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718 steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• I have windows xp SP3 installed and every time I have shut down the computer and think that his chest away he starts back up?

  I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...

  Whenever the computer is shutdown with in a few minutes, it restarts.  This is a new installation like 3 days...

  Any help would be appreciated to grealty

  Hello

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  Windows XP restarts when you try to shut down your computer

  http://support.Microsoft.com/kb/311806

  Method 2

  If the previous step fails then I suggest that you check to see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• RE: WINDOWS XP SP3 of queries sent October 2, 2010 dear Sir,

  RE: Queries WINDOWS XP SP3
  Envoy on October 2, 2010
  Dear Sir.
  We just installed Service Pack 3.  Now several changes
  have taken place, we want to reverse.
  1. all records have the beginning with FILE menu command
  FIND the best choice (in bold).  That means ENTER key opens
  Search, not the file directly.  We have our own system of
  storage file in subdirecories and do not want to use
  'My documents', "myComp" and other stupid names.  How can do us
  OPEN as the first choice?
  2. when to use CTRL + F to search for a name of text inside file
  a file, the window opens in the same position as the record
  to be examined.  It also closes this folder later.
  How can we have RESEARCH to appear as a separate window, while
  NO previous windows closed?
  3. the default icon for folders is a Manila folder with
  a lot of very small bunk symbols.  How can we define the
  default to a folder empty manilla everywhere?  The
  "applies to subsequent records" does not work.
  4. some record fields (columns) appear very light
  colour, white and tinted white.  This is a nice feature
  We want to use, but it is difficult to distinguish no difference.
  How can we make the differential color stronger?
  5. for the connection of an external hard drive, it automatically
  "autoplays" and a menu comes to "choose action".  We
  Oly use it to back up = data.  How can this unwanted wizardly
  assistance to shut up?
  6. in the browser, the message "Intranet settings are now".
  turned off... "appears every time and takes another bar
  across the width of the screen.  How can we delete this
  message permanently?  We have no Intranet connection.
  7. when clicking a *.pdf file suddenly the first order
  in the menu file is replaced by "open with Adobe Reader 9.
  How can I remove this annoying interference and simply do not have
  'open' option at the top of the page?
  8. from time to time, we record our voices using Microsoft «»
  Tape worm 5.1 SP3 "and headphone\mike together.  But the
  micro alive all the time 24/7.  Where can we find a
  button to turn off the microphone?
  9. in case of a 'research' reviews movies automatically to
  large icons, while we only use the format of "details".  How can-
  avoid us this constantly and everywhere?
  10. in opening the files, there is a subtle broken white color
  several fields of details.  It is strange that not the same
  fields have the same color.  While the colored backgrounds are
  attractive, we would lke more control and stronger colors.
  How we handle this view
  ?
  11. two of my folders have fonts colours blue and yellow, all
  others are in black.  Seems to have no control over that.
  How can I change the font color of the names of files and folders
  ?
  12. When you change the folder icon, it records as a new date
  changed, but no data is changed.  We now *.htm and
  their associates * _files on different dates. How can-
  We store the last modified date when data are
  in fact, only edited?
  13. in EXCEL3000, when two cells are merged in the two lines
  and the alignment of the text is located in the 'Center' then the other
  individual cells along these two lines, all texts are centered
  (including the number of line along the left border) and cannot be
  moved to the 'low' or 'top '.  How can we remove all «»
  alignment of the line '?
  14. in EXCEL3000, the cells seem to have a very slight tint
  (off-white) as the color field.  In edit mode, they turn
  more bright white, includng all other cells that have been
  recalculated after change data in a related cell.
  This lasts until the screen is refreshed.  This only happens
  in some sheets in the same workbook, but no color change
  in the other sheets.  How this attractive feature can be
  controlled in all sheets and how color can be set to one
  stronger tint?
  15. in EXCEL3000, the appearance of color of a spreadsheet is
  controlled by the definition of the location of the color
  palette.  But this can be changed arbitrarily by the user and
  isn't it the same in other versions of EXCEL.  How can we be
  certain that a proposed color actually appears even if
  the file is viewed by another user, or on another computer?
  16. in Internet Explorer v8, when downloading files from
  Internet, the meter on the bottom left starts to
  "Download (1.32 MB 6.35 KB): http://www...". "but then
  freezes and does not increment until the product for download.
  Sometimes it freezes at other values.  Fact that occasionally
  the counter advance at a rate set at full value.
  If it is a bug, can it be fixed?  If it requires an action,
  What do we do
  ?  When the whole numbers are displayed, the two
  decimal places are disappearing.  It is good scientific practice
  ALWAYS show the degree of accuracy, being two decimal places,
  including the zeros.  The mixture of display KB and MB in the
  same statement is NOT good scientific practice.  All units
  must be the same.  To display two decimals in kilobytes
  is insignificant and meaningless.  It would be preferable to view only the
  Megabytes, then to THREE decimal places to take account of
  Kilobytes.
  17. in EXCEL3000, using forms automatic drawing compounding
  several surfaces that overlap, the command "go to the front" and
  "go to the rear for" works well.  But the option 'down' and 'go '.
  superior"do not seem to work.  There is no way to find out
  in which order the drawing folios are stacked.  What makes
  the shading of unpredictable stacked surfaces.
  18. in WORD3000, the cursor blinking on the insert is sometimes
  very short, less than half of a strong letter.  Other times it is
  all the way up.  He's still very thin and not easy to see.
  How that can be controlled
  ?
  19. under WIN - XP, using "save under" a file name can be suggested
  or a new typed in.  By then changing the subdirectory,
  Sometimes the name turns into an existing file,
  already highlighted in this new subfolder.  Expected not
  This change, pressing "enter" of the old file is overwritten
  and its lost data.  How can it be avoided in all cases?
  20. in start the computer, it always displays a message
  "Cannot open the scanner program.  But I do not use a scanner.
  How this message got there and how to stop
  appearing in the future?
  21 when a folder is renamed, its 'Date Modified' passes to
  today.  But all subfolders automatically change their
  "Date of creation" in today.  It is a significant loss of integrety
  all of the files involved.  How this can be fixed or
  prevented from happening again?
  22. when a case is its icon has changed, the research"(CTRL + F)
  present the old icon.  How can we make the icon of a file
  the same appear everywhere wherever it is displayed?
  23. How can I make the sound composition, as the numbering mode
  beeps?
  Thank you Joe Baxter

  Hey, Joe Baxter,

  I suggest you to visit the following links to learn how to work with files and folders in Windows XP.

  What's new with files and folders?

  File and folder management overview

  How to search for files and folders in Windows XP

  How to arrange files using folder views in Windows XP

  I suggest you to create the new thread for each issue with title and category to give you the best solution.

  I suggest you to consult the following link to know how to ask the question in the forum.

  How to ask a question

  For problems with Office applications, I suggest you post on the following link.

  http://answers.Microsoft.com/en-us/Office/Forum