Satellite L300-1AS: connection WLAN don't Comeback

Similar Questions

• Satellite L300 PSLB8E - connection WLan keeps falling

  Hi all

  Have gotten my Satellite L300 PSLB8E some 2 months ago and since the first day (RTL8187b) wireless is having serious problems.

  Continuous wireless connection drop if other phones that I use at home are very good.
  LAN on the same Satellite works fine as well, it's just wireless problem with this particular machine.

  I have tried to restore the system, using recovery discs, tried every possible update Toshiba as Realtek, but problem remains intact.

  Help, please!

  Mustafa

  Hello

  What version of BIOS you have on your laptop?

  There is a version v1.8 of BIOS on the European driver Toshiba page.
  Check if you have a lower version. If so update!

  In addition, I would recommend WLan driver download Realtek page:
  http://www.Realtek.com.tw/

  You can find the most recent driver.

  Last but not least that it would be a good idea to verify that the settings in the Panel-> WLan card properties-> Advanced tab.
  Here you can change the encryption, the channel and the power saving settings.
  I recommend turning off the energy-saving WLan card.

  You should also update the Vista of the State. I read that Vista has caused a lot of issues that have been fixed with the latest patches and fixes.

• Re: Satellite L300-1AS - unable to connect via a WLAN

  Anyone, please help.

  My L300-1AS connects not wireless.

  The switch on the front is on and to the left, the F8 function key turns on the light and offshore, but even with it on, when I try to connect to a network it tells me that it cannot find. The diagnosis tells me to make sure that the wireless feature that it is. I'm sitting on top of the router and using another PC for this type so that the signal is there.

  I looked in Device Manager and in adapters network and when I do properties on the Intel(r) wireless WiFi link 5100 he says its working properly. The 'Update Driver' button tells me his up-to-date.

  It's as much as I think I'm able to check.

  Any help please.

  Hello

  I have a Satellite L300 too but it s a L300-10 q, but it should be very similar to yours
  In any case, the hardware switch on the front of the laptop must be on the right side. On my laptop on the right side is marked with and the left side with judgment.
  Check again!
  If you are not sure, take a look in the user manual.

  In addition you can enable/disable WLAN with FN + F8.

  If it doesn't work you should try to update the WLAN driver on your laptop. See the Toshiba WLAN portal for a newer version:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L300-1AS - BSOD on startup

  + * I have a problem starting of my Satellite L300-1AS. I've used it since December 25, 2008 (got a Christmas gift - and it's already does not work) * +.

  + * Whenever I start up my system (with windows vista) it shows me the text below: * +.

  Windows has encountered a problem communicating with a device connected to your computer.

  The error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred.* +.

  + * There is no device connected to this computer laptop whatsoever.* +.

  + * I tried to start a Toshiba laptop recovery software and also to update my BIOS from usb; CD; and then finally through an Ethernet LAN cable fix on my other computer - but the laptop just keeps showing the same message and does not react to the cd CD-ROM or USB enclosure in USB key... * +.

  + * Could someone please advise me what can be done, if necessary, to solve this problem? * +

  Hello!

  You can start in safe mode?

  I tried a bit with Google and I founded out that the problem could be due to perhaps the HARD drive. In your case I would test with Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Some programs do not work on my Satellite L300-1AS

  I have a laptop - Toshiba Satellite L300-1AS with Windows Vista installed.

  Lately, I have troubel with some fair programs now, I tried to reinstall 'Java' and I got the message "there is a problem with the Windows Installer Package. "A program run as part of the Setup did not finish as expected please contact your support staff" "Skype is no longer work or the rte player.

  I was told that I should put my computer back to a date before I started to have problems, but I don't know how to do it.
  I would therefore be grateful for any help
  Thank you
  Demented

  > I was told that I should put my computer back to a date before I started to have problems, but I don't know how to do it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• Satellite L300-1AS - load and operate on battery

  I have a Satellite L300-1AS, running Vista. The computer began recently to show it is "connected, charge", but does not actually charge. Start the computer normally to aid decision-making of current, however if disconnected from the electrical network and the laptop died (no charge in the battery).

  I thought that he could have the power adapter, but I also have an older toshiba which has the same exact power adapter, I tried it and it works on both machines (and two adapters to charge the old laptop)

  Then I thought that maybe it's the battery and bought a new battery (the computer is under warranty, but I needed it fast). The new battery will not charge, but shows 6% charge.

  Then, I thought it might be corruption under Vista, so have returned the computer to its factory settings, by reinstalling the software. It has not yet solved the problem.

  I also tried a few other ideas I found in Google.

  I feel that this problem is perhaps something to do with THE system BIOS, I have tried to re - install, but it won't let me, and I can't find a way to return to a previous version.

  Anyone know where I can find an older version of BIOS for my machine and how to change it to an earlier version? It is currently the latest version V1.90 from the Toshiba site.

  Hello

  This really strange boyfriend s but to me it sounds like a hardware problem... I think it might be the motherboard issue. Maybe the card mother doesn t charge the battery properly.

  In my opinion the best way would be if a cell phone technician would check your laptop. They can test the motherboard and all other parts.
  I doubt that s a BIOS because you problem n t have the problem for the first time.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck! :)

• Satellite L300-1AS - where to get the boot floppies?

  Hello

  I managed to lose my floppies to start for my Satellite L300-1AS, someone at - it an idea where I can buy a new one?

  Thank you

  Hey,.

  I assume you mean the Toshiba Recovery disk... Right?

  If yes you can order a new Toshiba directly by clicking here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite L300-1AS: how to replace the touch pad buttons

  Hello

  I have a 16 month old Satellite L300-1AS, my question is simple, I hope.

  HOW TO REPLACE A DEFECTIVE TOUCHPAD/LEFT MOUSE BUTTON

  Thank you

  Hello

  To do this the laptop everything must be dismantled.
  It is very difficult and not recommended for common users other parts that can be damaged while removing the process.
  In addition, you will need to the right spare parts.
  These parts can be ordered from ASP in your country.
  But if I would you so I ask for the help guys

• Satellite L300-1AS - where can I find the drivers

  Hi everyone, I just bought a L300-1AS paper and it came with a Vista CD.

  He started to go wrong and I took it to my friend and he said that the accompanying CD is not good. After trying to contact the person by email and by phone I don't know what to do next. My friend says I need the drivers for the laptop and that I should ask here if someone can help.

  It would be greatly appreciated if someone could help me.
  My email is [email protected] or my cell is 07773663904.
  Please help someone.

  Hello!

  All the drivers and tools can be downloaded from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You can search your laptop (Satellite L300) and download the drivers. Install it and that s all.

  I m wondering that you founded the forum, but not the drivers for the laptop. :)

  Good bye

• After standby mode Satellite L300 cannot connect to the internet

  Hello

  I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
  The only way I can connect again is to restart my laptop. Can someone help me please?

  Thank you

  Hello!

  I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.

  In any case, I think you should try to install the latest driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
  And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.

  Good bye

• Satellite L300 not connect to Netgear router

  Hi, I wonder if someone can help me.

  I recently installed a Netgear wireless home router. Although the Mac laptops and iPod in the House have all connected without any problems my Satellite L300 (PSLB8A-0VK004) is not.
  Curiously however Island L300 connects to a public network wireless outside my house without any problem.

  I have contacted Netgear, and they tried many things with me by phone. One of the operators of Netgear said it was a well-known problem of them and that he had a problem with Vista. They said I had to download Service Pack 2 for Microsoft (which I did) and the last 'Wireless drivers from the Web from Toshiba site'.

  I went to the Toshiba Download Center, but the drop-down list, it provides does not my laptop from its selection model. Also if I manually scan through the list of available downloads, I see those who are "Netgear Wireless Drivers".

  Can someone tell me where I can find these drivers?

  THX

  I think you Australian mobile phone model.
  Have you checked Toshiba Australia support and download page?

  Here is the link - http://www.mytoshiba.com.au/

• Eternal lands by playing on a Satellite L300-1AS

  Hello all,.
  I try to get Eternal Lands currently running on a Toshiba L300-1AS with 4 GB of RAM.
  It has the graphic chip Intel GMA 4500 installed HDM
  Problem is that EL blocks because I try to connect with what seems to graphics problems
  Anyone got any ideas?
  I can post more information or a screenie if necessary

  Thank you

  Hello!

  This game is not known to me, but you must ensure that you have the latest graphics driver.
  Search on the Toshiba site for this driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you should check if a fix is available for this game.

  And have you read in the manual if the Intel graphics card will be supported?

  Good bye

• Satellite L300-217 - connection to the Bravia KDL - 40EX503 LCD TV

  Can someone tell me what cables I need to do the above, I am a complete novice regarding this sort of thing?

  Thank you.

  Hi jonboy899,

  I have the Satellite L300 and there only VGA output port. Right?
  Also, I checked the features of your Bravia TV. It has a VGA input port.

  This means that you can use a VGA cable to connect your laptop to the TV. These cables you can get everywhere, and they are not expensive.

  If you are connecting, turn off both devices and then connect the cable. Turn on your TV and select the input VGA port. Then turn on your laptop and using FN + F5, you can switch between monitors. :)

• Satellite L300-1AQ connection to Toshiba Regza 37 '' LCD AV series 37AV505DB

  I think buying the Satellite L300-1AQ, how will I be able to connect to my Toshiba Regza 37 '' LCD?

  The LCD has no HDMI VGA port only 2, is a Toshiba laptop equipped with an HDMI port?
  What is the most cost-effective way on the connection of all laptops Toshiba to my LCD TV?

  Thanks for your help...

  Hello

  AFAIK the L300-1AQ supports only RGB (VGA port) port.
  This port provides only the analog signal and I doubt that you will be able to connect to the HDMI port because you cannot convert an analog signal into a digital signal.

  I put t know the other ports that is supported by the Toshiba Regza LCD 37 ", but I think that in this case, the HDMI port is not useful.

  Good bye

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.