Satellite L300-215 - recovery disk could not be installed on this hardware

Similar Questions

• Satellite L300 - product recovery disk hangs on step 2 of the installation program

  The product recovery disk will not work, it hangs on step 2 of the installation program.

  Help appreciated

  Hello

  Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

  If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

  I m with Verbatim DVD-R

• Satellite L300-215: windows Explorer does not respond after recovery

  Hello

  I got a blue screen - don't know what error message was and then stop.
  I realized the recovery process to return to output from the computer in the box, but when I start I only go as far as office and then "windows Explorer is not responding".

  Anyone have any ideas?

  Also if it is a disk failure hard can easily replace the hard drive and the boot of my recovery disks

  Ta

  > Also if it is a disk failure hard can easily replace the hard drive and the boot of my recovery disks
  Yes, easy to replace the HARD drive.
  It takes a HARD drive 2.5 SATA for this laptop.

  But I recommend that you check the first HARD disk using a tool called Drive Fitness Test... Use google to get this software

  Here are a few examples how to replace the HARD drive on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• Satellite U500-1DV - recovery disk does not work

  Satellite U500-1DV
  When windows starts up the first time, and while Toshiba request is things installation and system configuration, Windows crashes and restarts the system.
  What can I do? It happens every time.

  Thank you

  It may be the laptop computer hardware problem or recovery disk.
  You can try to start the installation using another disk installation disc for example clean Microsoft Win 7.

  If the installation would be functions, then your laptop s material should be ok and the problem is with the recovery disk

• Satellite L300-147 recovery disk problem

  Okay, so I lost all of my drives for my laptop (story tl; dw) and then it dies. I have order a new Toshiba Recovery disk image and start running repairs to it.

  Pull upward, press F12, select CD/DVD from the Start Menu and press ENTER.
  It gives me a message "Windows loading flies... "and a progress bar.
  Progress bar ends, clears the screen, there are about 30 seconds of animation 'The thought of Microsoft Bar', the computer is hard drive/CD drive noises.
  Then...

  Nothing happens.

  For ten minutes, nothing happens.

  Except a piece of my electricity bill is consumed by the white backlit screen.

  All words of advice, support, etc. greatly appreciated.

  Mark

  Hello

  At first, I can say that this recovery disk cannot be used for repairs. You can only use it for the new operating system installation.
  Behavior described is certainly not OK and you should be able to see the menu with the language options listed.

  What you can do?
  I'm scared of m not big thing. BIOS setting to default and try several times to see if you're lucky and the installation of recovery will be properly implemented.
  For testing purposes, you can try to get the Microsoft installation disc and see if the installation of the operating system starts correctly.

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Satellite P10 - 504 - recovery disk will not load

  Someone at - it ideas why my recovery disks won't load, all I get is a window box asking what would like to windows do you, like what you get when you insert a video or music disc, I'm sure the last time I used them only, they went directly into the recovery mode [, I had a major flaw which I managed about sort [see disappear down the page IE] but I need to start printing] Thank you

  Hello

  > all I get is a window box asking what would like to windows do you, like what you get when you insert a music disc or vid
  This means you want to use the recovery disc in Windows? It will not work.

  The point is that you must boot from the recovery disc rather Windows on the HARD drive so until the computer starts to go into the start menu and select the CD/DVD drive like device starting. Make sure that the recovery disk is in the drive and the recovery disk will start. Now follow the instructions on the screen.

• Satellite L300-217 - recovery disk cannot complete installation

  Blue screen appeared after having a few problems. I tried to reload the factory settings that did not work, so I ordered the Toshiba recovery media. After following the instructions that it seemed finally said to wait while windows was installed, after a few minutes this appaears:
  "Windows can complete the installation. Restart the installation '

  I tried this 6 or 7 times now and I do not get the case. I would be really grateful for assistance if possble.

  Thank you
  Kiki :)

  Hey,.

  Before you start a lengthy discussion, can you install Windows from a normal disk of Microsoft? Just to test if it s a bad hardware work or not.

  See you soon

• Satellite P200D Vista recovery disk will not work

  The OS is screwed on this laptop and when I try to boot normally a blue screen flashes so fast that you can't read and it stops. I try boot in hosted HDD repair he said: "the installed program cannot start. Click OK to turn off the computer. The CD drive is broken so I source and cd-rom external and started up the Toshiba restore disk. Who gets however that

  Waiting for ODD vacancies
  E ODD drive ready
  Check for support in the E: drive...
  /

  Then it basically crashes for this. Any ideas? Thank you

  > Any ideas?
  Swap the optical disk drive and you will be able to use the recovery disc. You can get it on eBay and it is not so expensive.
  I fear that external device is not correctly recognized and there is no access to recovery media.

• Satellite Pro L10: Recovery disk is not available

  HELO,
  I lost my disc of recovery for Toshiba Satellite Pro L10.
  Service in Poland say my only: Toshiba do not have this disc now.
  am I to do now?

  I need to reinstall my system.

  Model number PSL15E-00x009PL, serial number 55016672W

  Sorry, my English is bad.

  Krzysiek

  Hello

  It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
  I would recommend asking EPA again or to call other ASP in Poland.

  The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
  Such Toshiba things you will find on the page of the Toshiba driver.

• updates could not be installed

  I have for 2 months had the yellow shield on my Deskbar. Automatic updates are enabled, but I get the message some updates could not be installed. This is the KB 978551, 973443 Ko, Ko 973475, 975051 KB and KB 976882.
  I am running windows XP and the problem of update is more a nuisance than anything else, but I want to solve it.
  Any help would be welcome.
  Steve

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 'AIR App' could not be installed via iTune sync with Flash Builder 4.6

  Hi all

  After download and installation of Flash Builder 4.6 installation fees, I begin to create a simple Mobile project and run as fast build configuration.

  I got an IPA file, so I added my iPad to iTune, connected and synchronize the app.

  Surprisingly, after synchronization is complete, iPad shows a pop up: "App name" could not be installed. This also happens with the iPod touch too.

  
  

  I use:

  • Mac OS X Lion 10.7.2
  • latest version of XCode.
  • file of certification and supply of iOS which can be used in a preliminary version of 4.6 and 4.5.1

  I must tell you that I do not have something special in my project, just one button, a list and photo.

  Could you help me solve this problem? It could be a bug or might happen to another.

  Just resolved.

  I found the way to solve this problem is to create new file certificate and mobile delivery of iOS developers portal and the re - install in iTune app.

  I'm not sure on the origin of the problem, but I suspect the XCode and iTunes update. I've updated between them 4.6 FB pre-release version and full version.

  FYI, I found all my AIR application which built with 4.6 pre-release does not settle in the iOS via XCode device too.

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?