Satellite L300 - update BIOS black screen caused to go

Got Tempro opinion on Satellite L300 Bios upgrade. During the upgrade installation, laptop rebooted by itself. Result is fresh light on and power light, fan turns but black screen. What should I do to recover the machine.

Try this:

Remove the battery and the AC and let sit for an hour, then try to start again.
Open memory cover and remove the second Module of RAM (or change the size of the RAM). This may reset the system and startup.

If this fails, the BIOS was damaged, in which case you will have to send the laptop to an ASP for repair.

Tags: Toshiba

Similar Questions

  • 15 - d017: d017-15 update BIOS black screen at startup, Win + B keys do not help... How to unbrick?

    I try to get my 15-d017cl to start after upgrading the bios, here's what happened:

    -SSD installed to replace lack of hard drive, computer was working fine but disk was bad sectors (checked at default computer w/2nd hdd)

    -enabled Legacy support in the BIOS, so I could install w7 Pro 64-bit

    -installed w7 Pro 64 bit, no problems, started in Windows, everything works as expected

    -installed the Audio driver from the HP site for this 15-d017cl

    -site upgrade BIOS from HP for 15-d017cl, program says BIOS flash 100% then hung

    -After about 10 minutes, I repowered the black screen of the machine

    -start by pressing F10 key poster standard white text on the screen 'F10 '.... Configuration of the BIOS options, but it crashes it

    -start while now pressed the keys Win + B with or without a USB key (which has a different BIOS update) just hangs

    How do I unbrick my machine?

    I tried to download the 1.5 GB for a USB key that restores the BIOS update, but the download stops after 130-160 MB, I tried 6 times. Is HP corking downloads from their FTP server?

    Help! Any ideas will be appreciated.

    My model supports the Win + B keys to cancel the BIOS update?

    Y at - it another site where I can d/l the USB tool to roll back the update of the BIOS?

    Help!

    Hi mscir,.

    You make the W + B bad smell!

    First thing, it's that you need to load the BIOS DEFAULT settings

    You turn the computer off (if its currently turned off the coast)

    Turn it back on, then press the ESC far away so that you can access the START MENU

    Press F10, press F9 and then press F10 to save the changes and then press on enter if you are prompted.

    If the fix above does not solve your problem, then perform emergency Bios dump

    Many computers of portable HP have a BIOS for emergency recovery feature that allows to retrieve and install the latest well-known version of the BIOS from the hard drive, as long as the hard drive remains functional. This emergency recovery feature is separated from the BIOS and is designed to operate in the event of a catastrophic failure of the BIOS.
  • Update BIOS - black screen now on Satellite C660

    First of all Hello first post. I have 2 laptops computers C660 girls 1 satellite crashed a while a go so she began using mines. Mine C665D now broke screen can see some of the screen. Decided to try first permutation screen not switch different connectors then swapped hardy Bank 665 to 660 and clean install win7 pro. Was good, but had no network drivers. Do not have another pc iPads allows only a bit difficult to download driver swapped so Hardrive back download driver 660 exchanged again for driver loaded all good work. Reading tips says update all drivers. Started at the top of the page of the Toshiba driver and did the bios update. Crash! During installation stop 'corrupts' BIOS and now will not start. Push button power led both come the fan starts and then just stops. Fact a little research, and it seems that the bios flash was not a good option, too bad it's on the driver download page, won't happen again. I tried to leave without battery f2 etc but still stops. Any help would be appreciated as I am defiantly out of my depth now. The two pieces currently in the laptop, but I'm pretty well on the menu drop-down put back together thing, tempted to bin then all but both will see if you guys can help.

    was soon Blowen

    A bit of an update might help others?
    It seems that I need Ref lash the bios. From what I had read the reading process.
    1. make a bootable usb stick (at this stage now)
    2. download the bios. I downloaded back wi to be able to extract the files. There are 4 files as follows.
    1 bios. ROM 4 356 kalonji
    2 BiosCheck 1 kalonji (it is a Notepad I read file)
    3. ec.ROM 128 kalonji
    4 configuration 1389 kalonji
    Not exactly what file to be copied to a guess, I would say 1 but maybe all necessary?

    3. remove the hard drive and optical drive
    4 remove battery insert bootable usb, apparently, it is imperative that you keep it F key kept in then plug power on keep pressing the button F let go after a certain time (30 seconds not sure how long I'll try) release the F key. If you have a USB stick with a light if it lights it is working, wait just restart the system and I hope that you can now enter the rest of the system.
    I got my old Acer laptop installed fresh closet 7 win was running very slow spen so much more sorting, day was services using 100% cpu, Windows update, this turned out well and now pretty well I hope make bootable usb and put on the Flash Toshiba bios.
    Feel free to add if I missed something.
    Thank you
    4

  • Satellite A300 - after update BIOS black screen

    Hi all
    I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

    The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
    Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

    Please can you tell me how to start the recovery procedure it is possible (combination?),.
    Any help on fixing the laptop without replacing the motherboard will be much appreciated.

    Hello!

    I think that the ASP is just and in the worst cases, the motherboard should be replaced.

    You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

    If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

    Good bye

  • Satellite L850 - 17 k - black screen with blue dots

    Satellite L850 - 17 k black screen with blue dots see photo
    It is THE video card, can't find it.

    See photos

    If you see the same on internal and external display LCD, I presume that the video card is faulty.

  • Satellite A200-130 - had black screen after BIOS updated

    I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

    BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

    Now my laptop remains the same... just 'black screen '.
    Can someone help me on this matter? I really need this laptop to be repaired.

    Hello
    I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
    UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
    I'll send it to ASP.

  • Satellite L450 (PSLY0E) - a black screen after BIOS update

    It seems I have "brick" my phone during a bios utdate that went wrong... black screen as suspect: o.

    The laptop is a Toshiba satellite L450 (PSLY0E)
    The new bios image is named "bwaa150a.rom".

    Anyone know if it is possible to recover the bios of the flash or floppy drive, using a sort of toolfrom recovery inside the bios chip?... .or something?

    Anyone know who is the manufacturer of this bios?
    If I rename the bios image during a recovery, what 12xxxxx be named?

    To my knowledge, it is possible to reflash the EPROM module using the special procedure of crisis of the BIOS. But this crisis BIOS disk for Toshiba computers laptops isn't available for download.
    This must be done by authorized maker Toshiba.

    But I also read in the forum about those who tried some discs of crisis 3rd party BIOS.
    Sometimes it worked, but in most cases, you need advanced help technician.

    However, to use the forum search option advanced to search for similar topics on crisis disk BIOS. Otherwise, as I said above: you last chance might be the ASP.

  • Satellite A100 has a black screen and will not charge in the Bios

    I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

    Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

    Thanks in advance.

    Hi Conrad,.

    If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

    On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

    Kind regards

  • Satellite M60-128: start: black screen/delay/blocking

    Hello guys,.

    I have a strange problem with a Satellite M60-128.
    When I start the laptop there are a few problems:

    * Sometimes the remains of black screen (no Toshiba logo) and the laptop does not start
    * Sometimes the laptop starts normally (when he hung before and I turned off with the power button)
    * Sometimes the Toshiba logo is visible but stop there

    I also sometimes have a problem that the USB ports does not work. When I reboot, it works fine. When the USB ports fail, there is a warning in devices.

    I made an update of the BIOS (v1.60) but the problem remains.

    I noticed this: when the laptop does not start and I 'click' on the right button of the Toshiba logo toutchpad is visible and Notepad starts.

    Anyone familiar with this problem or some knows a solution? Thanks for advantage.

    Andy

    > I noticed this: what laptop doesn t start and I 'click' on the keypad touch s right button the Toshiba logo is visible and Notepad starts

    Very strange question usually the laptop should automatically start without pressing the button of the touchpad. For me, this is meaningless and it looks a bit like a motherboard problem
    What do you think about this?

    Have you tried to reinstall the operating system with the recovery CD Toshiba delivered?
    Maybe you should do to make sure this isn't a software problem

    Best regards

  • Satellite X 205-SLi3 - black screen with the mobile mouse at startup

    I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

    Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

    Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

    I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

    I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

    I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

    I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

    The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

    Someone had a similar problem?
    If so, what was the solution?
    I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

    Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

    Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

    Welcome them

  • Satellite Pro L770 - intermittent black screen

    I had some problems in the last few weeks with my L770 Pro Satellite.

    Occasionally, the screen is blank, it comes and goes without apparent cause, it can sometimes be empty for an hour, sometimes more, sometimes much shorter.
    There is a display when I connect to a TV via HDMI.

    The screen of the computer itself can go motionless on a desk, as well as come back when it has not been moved.
    As far as I know that some drivers have been updated.

    From there, I can only assume that there is a bad connection?

    Hello

    The display turns OFF when using Notepad or while staying away from the laptop?

    Please check the option called choose when turning off the display
    It is found on Panel-> power-> left column Options

    Here you can set the time when the display would be sounded.
    I would recommend settings this forever in order to test the functionality

  • Satellite A305-S6898 - half black screen at startup

    I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

    Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
    I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

    I do not download anything on this computer other than basic messengers and photo editing programs.
    I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

    What is the problem?
    Anyone have any ideas as to what I can do.
    I can't really go back to the shop because they give only a grace period of 14 days for returns.

    > I had the same problem of a half black screen on startup.
    > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

    Doesn't look good for me it sounds a bit like graphic problem.
    Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
    I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

    If, after installing new check usability of portable and so similar issues still persists.
    If nothing will change it s is strongly recommended to communicate with an ASP.

  • Satellite A-C55-1N1 black screen turned on

    I've had my laptop for 7 months, I had a lot of problems with it from the beginning.
    It has always run slow and started to disconnect internet without no reason.

    A few days ago, she refused to connect to the Internet at all and now when I turn it on I just get a black screen.

    No beeps or logos just a black screen. It turns on OK, and I tried to turn it on so that hip and with just the battery running.

    It is still under warranty, but I wonder if anyone has any suggestions. I am really disappointed that my last Satellite has been brilliant for years, had no problem.

    You are able to access the BIOS?
    To access the BIOS press the F2 button power button.

    In this case isn t possible try this:
    Disconnect the power adapter and remove the battery.
    Now hold down the power button / stop along 30 sec.
    After that, connect the AC adapter and the battery and press the power button once to turn on the portable computer.

    Is this possible? Your comments would be appreciated

  • Satellite L350 - D 215 black screen with blinking cursor

    Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

    I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

    I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

    Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

    Hello

    I agree with Akuma.
    Blinking cursor means that the Windows OS can not be loaded / booted up.
    You need to reinstall new OS.

    If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
    Otherwise, you would need order a recovery disc Toshiba from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Satellite C50D does not (black screen)

    Hello

    I have a problem with a Satellite C50D-A-133 which does not (rest on the black screen).
    I tried the reset procedure and I replaced the RAM without success.

    Has anyone had this problem?

    Thank you in advance.

    PS: for information, if someone reads Toshiba does not have this message, the french support site (redirects to the homepage when you enter the serial number or by selecting the model in the list).

    By reset procedure do you mean remove the battery and by pressing and holding the long power 30 dry?
    It is the common procedure in case the laptop doesn't wake up no more.
    But of course this will help in case of a hardware problem.

    It would also be possible that corrupted BIOS CMOS data prevents the machine to start. This can happen in case of module of the BIOS EPROM, but this should be verified by the authorized service provider

    As you can see, it's really not very easy to say what could be wrong here

Maybe you are looking for