Update BIOS - black screen now on Satellite C660

Similar Questions

• Satellite L300 - update BIOS black screen caused to go

  Got Tempro opinion on Satellite L300 Bios upgrade. During the upgrade installation, laptop rebooted by itself. Result is fresh light on and power light, fan turns but black screen. What should I do to recover the machine.

  Try this:

  Remove the battery and the AC and let sit for an hour, then try to start again.
  Open memory cover and remove the second Module of RAM (or change the size of the RAM). This may reset the system and startup.

  If this fails, the BIOS was damaged, in which case you will have to send the laptop to an ASP for repair.

• 15 - d017: d017-15 update BIOS black screen at startup, Win + B keys do not help... How to unbrick?

  I try to get my 15-d017cl to start after upgrading the bios, here's what happened:

  -SSD installed to replace lack of hard drive, computer was working fine but disk was bad sectors (checked at default computer w/2nd hdd)

  -enabled Legacy support in the BIOS, so I could install w7 Pro 64-bit

  -installed w7 Pro 64 bit, no problems, started in Windows, everything works as expected

  -installed the Audio driver from the HP site for this 15-d017cl

  -site upgrade BIOS from HP for 15-d017cl, program says BIOS flash 100% then hung

  -After about 10 minutes, I repowered the black screen of the machine

  -start by pressing F10 key poster standard white text on the screen 'F10 '.... Configuration of the BIOS options, but it crashes it

  -start while now pressed the keys Win + B with or without a USB key (which has a different BIOS update) just hangs

  How do I unbrick my machine?

  I tried to download the 1.5 GB for a USB key that restores the BIOS update, but the download stops after 130-160 MB, I tried 6 times. Is HP corking downloads from their FTP server?

  Help! Any ideas will be appreciated.

  My model supports the Win + B keys to cancel the BIOS update?

  Y at - it another site where I can d/l the USB tool to roll back the update of the BIOS?

  Help!

  Hi mscir,.

  You make the W + B bad smell!

  First thing, it's that you need to load the BIOS DEFAULT settings

  You turn the computer off (if its currently turned off the coast)

  Turn it back on, then press the ESC far away so that you can access the START MENU

  Press F10, press F9 and then press F10 to save the changes and then press on enter if you are prompted.

  If the fix above does not solve your problem, then perform emergency Bios dump

  Many computers of portable HP have a BIOS for emergency recovery feature that allows to retrieve and install the latest well-known version of the BIOS from the hard drive, as long as the hard drive remains functional. This emergency recovery feature is separated from the BIOS and is designed to operate in the event of a catastrophic failure of the BIOS.

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Replacing the screen on the Satellite C660-2EH

  Hi, I'm looking for a replacement screen for my Satellite C660-2EH and I can't find a specific model. I could buy the generic screen come to label C660? In some I found, for example:

  http://www.laptop-power.co.UK/laptop-screens/Toshiba-compatible/satellite/series-C660/model-C660.html

  http://www.laptopscreenonline.com/Toshiba-Satellite-C660-replacement-screen-laptop-LCD-15982-p.asp

  Would appreciate any help that someone could give me on this matter, thank you!
  Zoe.

  In my view the two links are OK, and you can't do anything wrong. AFAIK all C660 models use the same LCD display with following specifications:

  Display Type - color display TFT LCD
  Size (diagonal) - 15.6 "(HD)
  Resolution - 1366 x 768
  -16:9 aspect ratio
  Type of LED lighting - light side.

  Only the difference can be a salesman or the brightness to level 8.

  When you order this use being it's HD LED screen.

  By the way: you want to exchange it only? I mean it's not so easy and if you don t have any experience with this kind of things that you should ask for help.

  Be careful about this.

• Satellite A200 (PSAE0C-AH308C) - after the BIOS black screen update

  Hello

  I have a Toshiba Satellite (model No. A200; Part No. PSAE0C - AH308C) and to install Windows XP on a version already corrupted Vista (which had 4 partitions, that have been corrected, erased, then reformatted in a solid block). Now, I have installed all the appropriate drivers off Toshiba Canada support site...

  Everything worked, but I wanted to see in Windows (since I just got this computer) if everything was in place and working normally until I installed Ubuntu... Then I did the update to the BIOS flash. The program is supported in two formats, one for Vista and one for XP... for XP has a more high at 5.20 and Vista BIOS version the 1.80 revision of BIOS... that are marked as being updated by the Toshiba site. I opted to download the latest version of the BIOS.

  Things got ugly as soon as I unzipped the self-extracting program. First of all he said he could not find a .dll file (even if it is clear from there), so that seemed as if it started to Flash the BIOS but has not finished (it was just what happened when I opened the program)... I think he got to the ROM of compensation but did not have any code in there... Windows attempted to close the program because he did not respond, and I tried to take the program... had the same .dll error, but this time, the screen of the program was just gray...

  Given that this program is not Flash the BIOS unless the user selects the button "Flash BIOS", I have reason to believe that it was a bug in the program, or a combination of it and Windows comes to interfere (no program were running at the time, while he was supposed to be a dedicated flash). I can only flash in the Win.

  Now, I rebooted the computer, twice... the screen turns black, the HARD disc spins, the DVD drive has done his usual clicking sound when the computer starts, but it seems to stop as there is no BIOS entact.

  Can I replace the BIOS chip? There is no way for me to access the BIOS at all.

  Thanks for any help on this

  Thank you & best regards

  Muhammad Asif
  Manager

  THE COMPUTER HUT

  Center of the screen:
  F-115 trade place treat Saddar Karachi.
  Branch:
  G-31 place of trade treat Saddar Karachi.
  Headquarters:
  711-712 treat Trade Square Saddar Karachi.

  Tel: (+ 92-21) 2765359, 2734131 (Ext) 601
  Fax: (+ 92-21) 2724968
  Cell: + 92346-3277193
  E-mail: [email protected]

  Hello

  Unfortunately, the BIOS update has failed and now BIOS is damaged. For this reason, you cannot start and use your laptop. I agree with Luke. Please contact nearest Toshiba authorized maintainer and ask for help. Talk with them and I am sure that you will find the best solution to this problem.

  Satellite A200 is quite long on the market and it is hard to believe that updating the BIOS on the Canadian page may have a bug. All updates are tested and used by millions of users and service providers. If there is something wrong, I do not believe that this update will be available on the page of public support.

  In any case, contact the nearest service provider and explain the situation. Believe me this is the best thing you can do now.

  Good luck!

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• Black screen on startup - Satellite A200

  Hello

  I have a new Satellite A200-25 x (2 months). Sometimes when I start the work of hard drive, the light is also on, but I have a black screen. The same may appear after a sleep mode.

  Could someone help me and tell what is the problem?

  I put t know what s wrong but I know the solution ;)

  Many users here in the forum have confirmed that the update of the BIOS solves this annoying problem.

  Take a look on the page of European driver of Toshiba. Choose the BIOS compatible and right and then update.

  It should help!

• problems of Crysis 1 has No black screen now.

  I've seen a lot of answers to questions indicating that crysis 1a given accidents to black screens on different o.ses that I had windows 98 XP and Vista and my copy of crysis 1 never gave me a problem unless I used too resouluton that my graphics card could not overcome. So its fustrating it seems that anwser people see that it may have something to do with the fact that the crysis 1 submits this list operating systems to start up will not have windows 7 or the latest graphics cards. I am however trying to operate live 9 and with windows compatatbility for xp service pack 2 and 3 becaused I liked X.P more. I would get an arrested response and a .dll D3d10 fault as if I was running in vista. Now, I know that windows 7 is live 11 my video card is a 10 live and my motherboard is evaluated to opporate windows 8 could this be a problem every thing should be for x 11 direct., or you see something wrong with this system.please help someone.

  radeon HD 6750 video card of

  ASUS M5A99FX motherboard

  Windows 7 Professional operating system

  processor FX4100

  OK - I quote your new thread, so I can read all the information on one page - stick with a wire on a single topic in the future. It avoids the confusion and repetition of the suggestions.

  «I tried everything everyone else has, it just that someone has said that there crysis1 and can play on a 32-bit windows system.» It does not say something on his record or how he got that works perfectly, I guess it's the only one who says it works in 32 bit, all others, say if he to work ultimate 64 bit, why does. I'm using windows 7 32-bit professional. Oh, also instead of use oide im using A.C.H.I put sata up.in my bios it would have something to do with it. IM is not running in parrellel but serial.data flow. »

  Nothing to do with AHCI, 32 vs 64-bit or your motherboard is compatible Win8.

  «However trying to boot into 9 direct mode and with windows compatatbility for xp service pack 2 and 3 becaused I liked X.P more»

  Compatibility mode does not make Win7 run like XP.  In addition, it is not for you to determine which
  appropriate compatibility established by your bias towards XP.  Use what works.
  A strange thing with this game is it will run in 32-bit mode with no compatibility setting, but requires a consistency when using the 64-bit .exe - I use Vista sp2 with 64-bit .exe.

  "I would get arrested response and a .dll D3d10 fault as if I was running in vista".

  You choose the game settings are what determines if the game uses DX 10 not the operating system.
  Some of the very high settings are DX 10. When the gpu is not capable of DX10 these options would be
  not be available.
  Vista is the first to use DX10 and Win7 is first of all to use DX11 does not mean that they use also
  DX9. Check your System 32 folder and you will see many files d3dx9.
  Monopoly$ oft seems to think it's a good marketing advertising just the DX10-11 concept with
  Vista and Win7. A confusing marketing concept.

  With that cleared up - tell us exactly what is or is not happening.
  EG - accidents to black screen when? When you load or playing?
  It is the only game of the problems?
  You always use the same settings when you played the game under XP or have you tried
  using the highest setting?
  -You have all Windows Updates "Important." There are several
  Games related updates in addition to sp1 which is a must have.
  -Do you have installed recent graphics and audio drivers?

  Tweak guides may be useful for fine tuning Games - TweakGuides.com

• Black screen on the Satellite A350-122 using Linux Ubuntu

  Hi all

  I have a couple of months it has installed Ubuntu 9.04 (which completely replaces Windows XP) on my Toshiba A350-122 and this worked perfectly, until a recent day.

  One day, after having locked the computer, when I came back the screen was very dark and nothing was visible, except with the help of a powerful light behind. Reboot and remove the battery change nothing.

  * This is the case at the beginning of the boot, and even the Toshiba logo is not visible.
  * However, the system starts normally, and I can see in the darkness of my login prompt.
  * I can also select the BIOS Setup, but the screen is too dark.
  * I have no display on an external device.
  * It was not held after an update of the system.

  The first time it happened, I got it repaired.
  The guy has managed to make the display work and then restored Windows XP.
  They said: ' + Linux is responsible for + "... we cannot do anything more!

  I reinstalled Ubuntu, and it happened again the next day... :-(

  * My questions are :*
  # If it is software issue, don't you think it should work in installation mode?
  # Is it possible to reset the display or video card?
  # How can I find out the type of video and the reference (don't forget: my screen is black)?
  # Someone has an idea to advance?

  Thanks for your help

  Martin

  Hello

  I think it's certainly a Linux software problem because the laptop work correctly using Win XP or Vista preinstalled Toshiba I m right?

  The fact is that Linux is not supported by Toshiba:(et vous ne trouverez pas tous les pilotes compatibles sur la page de Toshiba)
  So you have to pick up on some pages of party 3 drivers needed

  On the black screen issue, I think you should check if you're used to that a graphics driver right maybe an update will help.

• Photo of screen pixelated on Satellite C660 - 11K

  Hello

  This is my first post here and I'm having a problem with my screen. On a white screen like this page I have a pink pixelated background makes it very difficult to do anything.
  On other colors of background, there is the same problem just (wrong) colors.
  When I quit my screen looks perfect for a second or two before turning off. Also if I use the external monitor via the pc port it works perfectly.

  My laptop is a Satellite C660 - 11K and 3 or 4 years.
  Is this the end? Thanks in advance for any advice.
  Gene

  It is not easy to say why this is happening. If the captain on the external monitor is OK, it is evidence that this graphics card must be OK. The LCD screen is probably the troublemaker.

  How it looks like when you enter the BIOS settings. All appear correctly?
  What happens when you start your computer in safe mode?
  What you can do as the ultimate test is to install the original recovery image and test with "presets".

• Black screen after hibernation - Satellite Pro A120 mode

  I have the following on my A120 problem:

  My Satellite Pro A 120 with professional vista crashes after I close the lid.
  The current settings in the power management standby is extended when the lid is closed, but I also tried with the sleep settings.

  After I opened my top once again, black screen appears and restart windows.
  Vista offers a solution online after the accident, but nothing appears as a result of the audit.

  Someone had this problem?
  I would appreciate any kind of advice.

  Hello

  I see you are using Vista on this laptop.
  This laptop has been pre-installed with Windows XP. Am I wrong?

  It would be very interesting to know if the same thing happens with the OS pre-installed Toshiba. Please check this!

  That say these issues can be caused by wrong or not entirely compatible graphics driver or lack of MS patches/fixes.

  I recommend checking out the various graphics and update the operating system drivers to the last State

  Best regards

• Changes settings of the BIOS - black screen boot. [TravelMate P453-M]

  Laptop still under warranty.

  I recently had a motherboard and replace the HARD drive.

  I wanted to install Windows Me, but the BIOS has been defined in the UEFI, and I couldn't start on a USB key.

  So I turned on the heritage, booted from the USB and installed Windows very well.

  For some stupid reason, I went back to try to change the setting in the UEFI.

  Now the laptop turns on, but won't start. I get a black screen, no logo or any what guest to access the BIOS.

  I read a little and seems that I have to remove the BIOS battery, let the memory itself to reset the default BIOS settings and try again clear?

  If it's important, I re-installed Windows 7 64 bit.

  Any help would be appreciated!

  Ah, I've solved the problem! Created a boot UEFI active USB key with a GPT partition, using the software of Rufus. And it started from it very well.

  Thank you, my Lord and Savior Google.

• Black screen after startup - Satellite A105-S4334

  It gives me black screen after the display of the logo just after the appearance of the cursor and nothing I can do except hold the button 'Disable' of windows, and then restart again, it shows the menu to make it start in safe mode... network mode... normally or lastest know good windows start...

  When he starts for the second time it works very well, he does it all the time and now I'm reinstalling windows for the 2nd time (factory State) any solution or explanation for that matter?

  Hello

  It is not easy to say why this is happening. Have you standing connected an external device, such as USB, printer or something similar?